• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.2
• /
• pp.174-182
• /
• 1995

Using the optical data from the EUMELI 3 and 4 missions, the optical properties are discussed in relation to primary production in the oligotrophic zone of the Eastern Atlantic Ocean. The depth of euphotic layer $(Z_{eu})$, the total accumulated concentration of pigment $(C_{TOT})$ and the concentration of pigment (C) are 88m, $12.4mgm^{-2}\;and\;0.14mgm^{-3}$, respectively for the EUMELI 3 mission and 101.7m, $10.0mgm^{-2}\;and\;0.10mgm^{-3}$, respectively for the EUMELI 4 mission. The concentration of pigment is higher in autumn (EUMELI 3) than in spring (EUMELI 4). This indicates that the concentration of photosynthetic pigment has a close correlation with vertical attenuation coefficient $(K(\lambda))$ that changes seasonally in the euphotic layer. While the spectral distributions of downward Irradiance$(E_d)$ for the wave length of 470nm increase with depth, those of upward irradiance $(E_u)$ for the wave length range between 410nm and 490nm are constant, because the study area is covered with the blue and clear oceanic deep waters. The vertical attenuation coefficients of downward irradiance $(K_d)$ and upward irradiance $(K_u)$ have low values between 0.02 and $0.06m^{-1}$ due to the low absorption and scattering by the photosynthetic pigment of phytoplankton. Therefore this zone has the characteristics of the case 1 waters with low concentrations of photosynthetic pigment, and can be classifed into IB.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.383-389
• /
• 2000

Stabilities to heat, pH, light were investigated about isolated red color pigment from the Korean Lithospermum erythrorhizon. The extracted pigment, acetylshikonin was stable heating at 40∼80$\^{C}$ for 1∼2 hours, hut it was specially unstable on the storage above 55$\^{C}$. The extracted pigment, acetylshikonin was stable on the sunlight under the red and green filters but unstable under the yellow and blue filters. The extracted pigment, acetylshikonin was stable under the pH of 4∼8 but unstable under the pH above 10. The extracted pigment, acetylshikonin was stable under the KCl and NaCl at concentration of 10$\^$-1/Mole. The pigment was very unstable under the CaCl$_2$, FeCl$_3$, CoCl$_2$, AlCl$_3$ and MnCl$_2$ at concentration of 10$\^$-1/Mole. The red pigment, acetylshikonin was stable under citric acid and acetic acid at concentration of 1 Mole. Especially, acetic acid was effective for the stability of the pigment.

• Preventive Nutrition and Food Science
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2000

The binding capacity of chitin and chitosan to anthocyanin pigmentss isolated from purple perilla leaves was inves-tigated. The pigment binding capacity increased with increasing pigment concentrations and decreasing pH without being affected by reaction temperature and particle sizes. Regression analysis revealed significantly high corre-lations between pigment binding capacity of chitin and chitosan and pigment concentration at ranges of 25-100 mg of pigment/g of sample, After 1 hr settling, release of pigment from pigmented chitin and chitosan increased with increasing pH, up to 24.9% and 17.4%, respectively, at pH 9. In general, pigment binding capacity of chitosan was higher than that of chitin. There results suggest that chitosan may be useful as a potential adsorbent capable of stabilizing anthocyanin pigment.

• KSBB Journal
• /
• v.30 no.6
• /
• pp.319-325
• /
• 2015

Arthrospira platensis (A. platensis) is one of the most explored cyanobacteria and has been studied for proteins, vitamins, pigment (chlorophyll and carotenoids) and fatty acid. In this study, we tested the effect of $NaHCO_3$ and $NaNO_3$ on the microalgae growth under photoautothrophic culture in A. platensis. As a result, cell growth and dry cell weight were increased in proportion to the $NaHCO_3$ and $NaNO_3$ concentration. Pigment (chlorophyll and carotenoids) contents of A. platensis were increased with proportion to $NaHCO_3$ concentration. But, the content of pigment (chlorophyll and carotenoids) in 100% $NaNO_3$ medium of A. platensis was the highest, 40%, 140% and 200% $NaNO_3$ medium with pigment content of A. platensis was reduced. In conditions of $NaHCO_3$ (50%) or $NaNO_3$ (40%) limitation, A. platensis could accumulate lipids to high as 1.7-fold and 1.3-fold.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.6
• /
• pp.612-616
• /
• 1998

Optimal media and cultural conditions for the production of red pigment were established using Monasurs anka KFCC 4478. The optimal temperature and initial pH for the production of red pigment were 30$^{\circ}C$ and 7.0, respectively. Glucose turned out to be most suitable carbon source for red pigment production. Optimal glucose concentration was 3.0%. Addition combined of nitrogen sources of peptone and NaNo3 induced good red pigment production. Thiamine-HCI and nicotinic acid were increased the production of red pigment. Under optimal conditions, maximum red pigment production and cell growth were observed after 5 days of incubation.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.387-392
• /
• 1998

To establish a monthly data collection planning for the Ocean Scanning Multispectral Imager (OSMI), we have examined the global patterns of three impacting factors: pigment concentration, cloud cover, and sun glint. Other than satellite mission constraints (e.g., duty cycle), these three factors are considered critical for the OSMI data collection. The Nimbus-7 Coastal Zone Color Scanner (CZCS) monthly mean products and the International Satellite Cloud Climatology Project (ISCCP) monthly mean products (C2) were used for the analysis of pigment concentration and cloud cover distributions, respectively. And the monthly simulated patterns of sun glint were produced by performing the OSMI orbit prediction and the calculation of sun glint radiances at the top-of-atmosphere (TOA). Using monthly statistics (mean and/or standard deviation) of each factor in the above for a given 10$^{\circ}$ latitude by 10$^{\circ}$ longitude grid, we generated the priority map for each month. The priority maps of three factors for each month were subsequently superimposed to visualize the impact of three factors in all. The initial results illustrated that a large part of oceans in the summer hemisphere was classified into the low priority regions because of seasonal changes of clouds and sun illumination. Sensitivity tests were performed to see how cloud cover and sun glint affect the priority determined by pigment concentration distributions, and consequently to minimize their seasonal effects upon the data collection planning.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.1
• /
• pp.71-80
• /
• 2003

Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content or characteristic also affect to the fluidity property not less than the vehicle. In the study, with the same vehicle on each sample, by making the sample to increase pigment content gradually. It can be examined the influence of the pigment to the fluidity of ink. In result we found that the viscosity value of the low shear rate rang has relatively higher value with increasing the pigment content in the ink. According to higher pigment content, yield stress and thixotropy index increases gradually. Structure recovery of the ink is that, the higher pigment content's ink, the less changing shear rate, and it takes less time to recover.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.756-762
• /
• 1996

In order to develop the method for mass production of natural food colorant from Monascus anka, optimum cultivation conditions for producing red and yellow pigments by cultiva- ting the mold in a jar fermenter and their color characteristics were investigated. The mold produced red and yellow pigments both intracellularly and extracellularly. These pigments showed unique light absorption characteristics with maximum absorption of 494, 380, 506, and 388 nm for extracellular red pigment (ERP), extracellular yellow pigment (EYP), intracellular red pigment (IRP), and intracellular yellow pigment (IYP), respectively. Optimum conditions for producing red pigments were found to be temperature 30$\circ$C, initial pH 6.0, rice powder 3-5%, peptone 0.05%, magnesium sulfate 0.25%, aeration rate 0.1 vvm. Optimum temperature for producing yellow pigments was around 35$\circ$C which is higher than that of producing red pigments. The initial pH and rice powder concentration for producing yellow pigments were the same as those of producing red pigments. The higher concentration of nitrogen source and inorganic salt, aeration rate, the more the yellow pigments were produced. The optimum agitation speed was 100 - 300 rpm for pigment production.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.4
• /
• pp.293-302
• /
• 2008

Lead chromate is made by sodium dichromate and lead acetate, and has being used widely in the part of pigment, paints, inks, plastics and so on. Even though lead chromate has health hazards which like both lead and chromium, there are a few study about pigment workplaces using lead chromate in Korea. The purpose of this study is to evaluate workers' exposure levels and airborne lead and chromium concentration in the pigment workplaces using lead chromate. There are 20 workers in the total 5 workplaces. 10 workers(50%) have been exposed to lead and 3 workers(15%) have been exposed to chromium, which exceeded the American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value (Pb: $0.05\;mg/m^3$, Cr: $0.012\;mg/m^3$) and Korean Ministry of Labor's Standard. Geometric mean (GM) of airborne lead was highest in pigment ($0.0421\;mg/m^3$), paint ($0.0020\;mg/m^3$) and PVC coloring ($0.0007\;mg/m^3$), respectively(p<0.05). The result of airborne chromium concentration was paint ($0.0033\;mg/m^3$), paint ($0.0004\;mg/m^3$) and PVC coloring ($0.0003\;mg/m^3$). Also the lead and chromium concentration in the manual process is each 30 times and 10 times higher than the value in automatic process(p<0.01). In the classified process by detail, the concentration of airborne lead was $0.0638\;mg/m^3$ in grinding & packaging, mixture & after-measuring ($0.0436\;mg/m^3$), filtration & drying ($0.0402\;mg/m^3$), lead nitrate & dissolution($0.0129\;mg/m^3$), pigment commitment & mixture ($0.0013\;mg/m^3$) and dispersion & grinding ($0.0010\;mg/m^3$) (p<0.05). Moreover the concentration of a sample in weighting & packaging was $0.0023\;mg/m^3$. The concentration of lead in workers' blood was pigment (15.12 ug/dl), paint (4.74 ug/dl) and PVC coloring (2.50 ug/dl), and some samples have exceeded biological exposure limit. In conclusion, the depending on their work industry and process, workers have been exposed to the high lead chromate.

• Textile Coloration and Finishing
• /
• v.17 no.4 s.83
• /
• pp.15-20
• /
• 2005

Poly(ethylene-co-vinylacetate)(EVA) microspheres were prepared by thermally induced phase separation in toluene. The microsphere formation occurred by the nucleation and growth mechanism in metastable region. The effects of the polymer or pigment weight percentage and cooling rate on microsphere formation were investigated. The microsphere formation and growth were followed by the cloud point of the optical microscope measurement. The microsphere size distribution, which was obtained by particle size analyzer, became broader when the polymer concentration was higher, the pigment concentration and the cooling rate of EVA copolymer solution were lower.