• 한국시스템다이내믹스연구
• /
• 제12권1호
• /
• pp.39-57
• /
• 2011

This paper is the result of simulation modeling concerning high-level radioactive waste repository(HLRWR) and people's mind for the facility. We describe a procedure of simulation modeling for resident's policy acceptance and perceived risk of HLRWR facility by using System Dynamics approach. To Complete some complicated works, we made the 20 pieces of stock-flow diagrams based on the causal loop diagram that is a blue print of whole variables and relations. The simulation outputs clearly show that cental government efforts to siting the HLRWR will be failed if nothing to give for the region's residents. On the contrary, a monetary incentive and a regional development program help to turn this gloomy situation into a desirable and acceptable condition dramatically. Government has to prepare the schemes considering the HLRWR acceptance and total supporting program including the cash and local development programs.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.

• 터널과지하공간
• /
• 제19권5호
• /
• pp.450-462
• /
• 2009

본 연구는 국내에서 출토되는 화성암, 변성암, 퇴적암 1,417개 블록의 일축압축강도를 간접방법으로 도출하는 과정에서 각 시험법에 따른 강도발현의 거동 특성을 분석하였다. 퇴적암은 간접시험법에 따라 암석군에 상관없이 동일거동을 보이며, 압열인장강도를 매개로 시행한 과정에서는 암석군끼리 동일 거동 특성을 나타내고 있다. 이는 간접시험법을 적용했을 때에는 지질학적 생성원인에 따라 상관성해석을 시행해야 신뢰성 높은 결과를 도출할 수 있음을 암시한다.

• 한국가구학회지
• /
• 제22권2호
• /
• pp.126-131
• /
• 2011

The purpose of this study were to analyze the species and tree-ring dates of coffin woods excavated at Yerim site in Yesan, Chungnam, Korea. We sampled 12 pieces of woods from two coffins. The species of all coffin woods were identified as red pine group, most likely, $Pinus$ $densiflora$. The last rings of both coffins were dated A.D. 1557 and A.D. 1601, respectively. The tree-ring dates indicated that the coffins were made in the late 16th and early 17th century.

• 센서학회지
• /
• 제7권1호
• /
• pp.39-44
• /
• 1998

연속적인 단일모드 광섬유에 설치 가능한 저반사율을 가진 광섬유 거울들이 기계식 접합기와 깨끗이 절단된 끝단면에 $TiO_{2}$ 유전체 물질로 코팅된 광섬유 단편들을 사용하여 만들어 졌다. 0.1%의 반사율을 가진 광섬유 거울들이 만들어 졌을 때 광섬유 거울의 삽입손실의 범위는 0.055dB 부터 0.3dB 였으며 평균 삽입손실은 0.15dB였다. 저반사율을 가진 광섬유 거울들은 필드에서 쉽게 만들어 질 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.61-65
• /
• 1996

This paper experimentally describes the grinding characteristic of discontinuous grinding wheels in creep-feed grinding. In creep-feed grinding, grinding temperature increases rapidly and thermal damage such as a burn occurs on a workpiece. Discontinus grinding wheel with Conventional grinding wheel shows an exellent cooling effect has been developed. The wheels have 6, 12, 24 pieces of slotted which compare with characteristics of each wheels

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.59-65
• /
• 2002

Grinding temperature between a grinding wheel and a workpiece surface, rising rapidly during a machining operation, has bad effects on a surface integrity such as the burning, the residual stress and the crack. In this study, the temperature distribution was obtained briefly by the finite element method and the grinding temperature of a workpiece varying with the grinding condition was measured experimentally. For obtaining the grinding temperature, a thermocouple method was applied. Three thermocouples were inserted in a surface of each workpiece. Changed grinding conditions were the depth of cuts, the feedrate, the dry and wet grinding, the up and down grinding and the number of pieces.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.489-495
• /
• 2013

This study analyzed thevariation in the cutting force when the cutting area of a terrace volume is machined, which is generally left after the rough cutting of a sculptured surface. The numerically simulated results for the cutting forces are compared with cutting force measurements by considering the theoretical prediction of the cutting area formation and specific cutting volume. The variation in the cutting force is measured using a dynamometer installed on a machining center for 19 different kinds of test pieces, which are selected according to the variation in the terrace volume factor, tool diameter factor, and cutting depth factor. As a result, it is verified that the cutting forces evaluated by the numerical analysis coincide with the measured cutting forces, and it is proposed as a practical cutting force prediction model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.418-422
• /
• 2005

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire has been investigated. Test pieces were fabricated using die series with different mean and final reduction ratio. Surface residual stresses in the axial direction were measured by X-ray diffraction, Broker's 2-dimensional GADDS system. Results were compared with stress profiles which were calculated by 3D and 2D finite element simulation, Hibbitt's ABAQUS 6.4 program in Finite Element Analysis. By means of FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• 소성∙가공
• /
• 제15권2호
• /
• pp.153-157
• /
• 2006

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray diffraction, Bruker's 2-dimensional GADDS system. The results were compared with stress profiles that were calculated by 3D and 2D finite element simulations, ABAQUS 6.4 program in finite element analysis(FEA). By means of the FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.