• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1414-1421
• /
• 2006

본 논문에서는 VOD에서 스트리밍 데이터를 효율적으로 서비스할 수 있는 Consistency 알고리즘을 제시한다. 미디어 데이터 서비스를 위해 우선 하나의 미디어 데이터를 라운드 로빈 방식으로 스트라이핑하여 각 호스트의 저장 노드에 저장한다. 본 논문에서는 일반적인 계산 용도로 사용되는 barrier 메커니즘을 미디어 플레이 최소 단위인 (SH, GOP) 미디어 데이터에 서비스할 수 있도록 제시하였다. 데이타 처리 방식은 하나의 호스트에 한 프래그먼트 크기의 공유메모리를 할당한다. 이 공유메모리 는 barrier 메커니즘을 통하여 RTP패킷 전송 단위로 결정될 프래그먼트 데이터의 조합을 형성한다. 본 논문에서 제시한 알고리즘에 대해서 실험을 수행하기 위해서 VOD 시스템에서 프로그램을 작성하였다.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.28-35
• /
• 2002

Kullback Discrimination Information (KDI) is one of the pattern recognition methods. KDI defined as a measure of the mutual dissimilarity computed between two time series was studied for detection and classification of bearing flaking on outer-race and inner-races. To model the damages, the bearings in normal condition, outer-race flaking condition and inner-races flaking condition were provided. The vibration sensor was attached by the bearing housing. This produced the total 25 pieces of data each condition, and we chose the standard data and measure of distance between standard and tested data. It is difficult to detect the flaking because similar pulses come out when balls pass the defection point. The detection and classification method for inner and outer races are defected by KDI and nearest neighbor classification rule is proposed and its high performance is also shown.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.110-113
• /
• 2012

ZnO crystals with a baseball bat shape were synthesized without any catalysts through a simple thermal oxidation of ZnS powder in alumina crucible under air atmosphere. SEM images demonstrated that the bat structure was composed of two pieces of ZnO crystals, i.e hexagonal-shaped rod and inverted cone-shaped rod. X-ray diffraction (XRD) pattern revealed that the ZnO crystals had wurtzite hexagonal structure. Energy dispersive X-ray (EDX) spectrum showed that the ZnO was of high purity. A strong green emission peak at 510 nm was observed in cathodoluminescece spectrum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.891-893
• /
• 1992

Polymers have good electrical properties as an insulation material. Though they show more and less poor resistance to heat, radiation, and oxygen, the poor properties have been overcame by developing new resin with the saturated molecular structure and compounding resin with resistive fillers. Polymer insulators have many advantages; light weight, good mechanical properties, better contaimination performance, low cost by mass productivity, no destruction in many pieces, good flexibility in design, short manufacturing time. Usage of polymer insulators has increased rapidly with good credit on long term properties in advanced nations and will continue to grow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.688-693
• /
• 2007

Most frame structures cannot be manufactured in a single-piece form. Ideally, when a structure is built up by assembling multi pieces, assembly at the joints should be rigidly performed enough to have almost full stiffness, which is difficult for practical reasons such as manufacturing cost and time. In this research, we aim to develop a manufacturability-oriented compliance-minimizing topology optimization using a ground beam model incorporating additional zero-length elastic joint elements. In the present formulation, design variables control the stiffness of zero-length elastic joints, not the stiffness of beams. Because joint stiffness values at the converged state can be utilized to select candidate assembly locations and their strengths, the technique is extremely useful to design multi-piece frame structures. An optimal layout is also extracted based on the stiffness values.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.117-122
• /
• 2000

This paper presents an indirect compensation of thermal errors during machining , in which thermal error is modelled as a linear regression of temperatures measured at 4 specified positions. In this regression model, weighting coefficients of the measured temperatures were estimated by using the least square method. The grinding test with compensation , after 4 -hour warning-up operation before the test, showed that the maximum machining error of the work pieces was reduced to 12${\mu}{\textrm}{m}$ while it measured by 28${\mu}{\textrm}{m}$ without compensation . Furthermore the standard deviation of machining errors was also reduced from 8${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$.

• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.24-31
• /
• 1999

Bulging is a forming method to shape of die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at the both ends of tube. The diameter of tube expands by hydraulic pressure in tube. at the same time, thrust at the both ends of tube. pushes tube in the direction of expansion to obtain high expanding rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by the combination method of bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• 소음진동
• /
• 제5권3호
• /
• pp.403-411
• /
• 1995

Square beam type piezoelectric vibrating gyro is developed for the measurement of angular velocity, which is compact, small in size and mass- producible. It features that three pieces of piezoelectric ceramics and bonded onto one face of equilateral square bar type gyro head. Two of them are used as sentuators which drive the gyro head and measure Coriolis force. The third piece is used for the feedback signal in order to resonate the gyro head and measure Coriolis force. The third piece is used for the feedback signal in order to resonate the gyro head with its fundamental natural frequency. Matching two fundamental natural frequencies in the gyro head with its driving frequency is found critical in the design of vibration gyro. Calibration results show that the vibrating gyro developed has the dynamic characteristics of first-order system within the frequency range of interest, which can be easily compensated by a lead compensator.

• 한국가구학회지
• /
• 제21권2호
• /
• pp.196-204
• /
• 2010

This study focuses on wardrobes to examine how the terms have been changed by comparing traditional Korean furniture in Chosun Dynasty and contemporary furniture since the traditional furniture terms and forms have been changed like our life culture. For chests and wardrobes, approximately 26 terms were used in Chosun Dynasty. However, only five of them are currently used for top panels, hinges, drawers, mirrors, and columns. For bedroom cabinets, 27 terms are used and 4 of them are changed with the same meaning. The change of the terminology results from the life culture mostly. While the Chosun Dynasty furniture terms were mostly presented as the Korean and Chinese language, in the contemporary furniture ones Korean and Chinese together with English are used. The English terms' usage results from hardwares imported from overseas. The terms derived from the three different languages are presented not only in the wardrobes but also other pieces generally.

• 한국가구학회지
• /
• 제28권1호
• /
• pp.72-79
• /
• 2017

The knobs of the Joseon dynasty furniture were mainly made with metal in its consideration about durability and decorative characteristics, small pieces of furniture, the Kori types of knobs, big furniture, that desires, descendants. Meanwhile huge furniture had Butchimdae which can be used also as the locking mechanisms, or just the locks which were used as handle. The handle type included the idea of shamanism that desiring health and longevity, scholarly spirit and prosperity of descendants, therefore the design metaphorically contained the shape of the long-living and prolific animals and plants. Even though traditional furniture were constructed as succinct proportions and simple decoration because of the affect of Confucianism. Therefore, we can notice the hope forefathers indwelling in the handles made of metal.