• 보존과학연구
• /
• s.25
• /
• pp.155-170
• /
• 2004

Jonam mountain is located in Gung nam Hamangun gayaeup, and it is 139.4m above sea. Most of Haman area consists of hill and mountains and Pinus densiflora Sieb. et Zucc,Quercus acutissima Carruth, Quercus variabilis Bl, Quercus mongolica Fisch and Robiniapseudoacacia L are distributed. Sungsan mountain fortress wall is designated as a national historical spot 67th and our laboratory excavated and surveyed Sungsan mountain fortress wall from 1991 to 1994.Especially, we confirmed mud layer in 1992 and excavated wooden remains such as wooden strip with inscription and so on. Also, wooden strip with inscription and the wooden remains of the type which is various such as brush, knife, various club, vessel, awl were excavated in 2002.After classifying remains on the spot, they were washed. We found three pieces of wooden strip during washing, and three pieces of wooden strip during conservation processing. Also, we confirmed others. Until now, we have processed 8000 wooden remains, and we are processing about 1500wooden remains.

• Journal of Korea Multimedia Society
• /
• v.17 no.8
• /
• pp.953-960
• /
• 2014

In Shamir's (t,n)-threshold based secret image sharing schemes, there exists a problem that the secret image can be reconstructed when an arbitrary attacker becomes aware of t secret image pieces, or t participants are malicious collusion. It is because that utilizes linear combination polynomial arithmetic operation. In order to overcome the problem, we propose a secret image sharing scheme using matrix decomposition and adversary structure. In the proposed scheme, there is no reconstruction of the secret image even when an arbitrary attacker become aware of t secret image pieces. Also, we utilize a simple matrix decomposition operation in order to improve the security of the secret image. In experiments, we show that performances of embedding capacity and image distortion ratio of the proposed scheme are superior to previous schemes.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1628-1633
• /
• 2016

This paper derives an effective shape of the ferromagnetic pole pieces (low-speed rotor) for the reduction of transmission torque ripple in a magnetic-geared machine based on a Box-Behnken design (BBD). In particular, using a non-linear finite element method (FEM) based on 2-D numerical analysis, we conduct a numerical investigation and analysis between independent variables (selected by the BBD) and reaction variables. In addition, we derive a regression equation for reaction variables according to the independent variables by using multiple regression analysis and analysis of variance (ANOVA). We assess the validity of the optimized design by comparing characteristics of the optimized model derived from a response surface analysis and an initial model.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.3
• /
• pp.358-359
• /
• 2000

Statement of problem. Confusion about the relationship of surface characteristics of implant to osteoblast cell attachment. Purpose. This study attempted to bone cell attachment to the implant surface which was modified by heat. Material and methods. Commercially pure titanium grade 2, $4{\times}4mm$ sheet 40 pieces were treated for 10 minutes with ultrasonic cleaner with methylethyl ketone, ethanol, deionized distilled water, and half of the specimen 20 pieces were heat treated in $980^{\circ}C$ for 15 minutes. All 40 specimens were autoclaves. Total 6 dishes were prepared, 3 dishes were for control group, and the other 3 dishes were for heat treatment. In fourth day, cell account was done. Conculsion. The change of surface characterization by heat treatment could affect the cell attachment in the early stage however, the change of surface characterization would not be prolonged.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.685-692
• /
• 1991

The pool boiling behavior of a heated surface has been investigated experimentally, focusing on the cases when only a part of the contact surface is heated. Characteristic boiling curves are obtained with circular metal surface test pieces heated below while immersed in Refrigerant-113. Locally heated test pieces are fabricated by inserting a heating block at the center inside a larger conducting block. Overall heat transfer rates are measured while the experimental conditions are systematically varied. The local temperature profiles along the radius are measured for conducting blocks. It is found that the conjugated boiling condition exists and the total heat fluxes should be correlated to a suitably defined temperature difference.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.6
• /
• pp.67-70
• /
• 2009

Nesting and cutting path optimization have a great effect on the improvement of productivity in many industries such as shipbuilding, automotive, clothing, and so on. However, few researches have been carried out for the optimization of a cutting path algorithm. This study proposed a new method for cutting optimization using gravity center of cutting pieces and a genetic algorithm. The proposed method was tested for a sample plate including many different shapes of cutting pieces and compared to 2 other conventional methods. The test results showed that the new method had the shortest cutting path and the best effectiveness among the 3 methods.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.3-11
• /
• 1999

The atomic fuel rods between top and bottom end pieces of reactor need to be extended for high combustion rate of future-type fuel to increase the irradiation in the axial direction. For allowing axial extension of the fuel rods, the space between top and bottom end pieces should be expanded. Thus the thickness reduction of the flow plate is necessary. This study was carried out the mechanical strength test by using strain gages as a function of flow plate thickness, the existence of skirt and loading condition for the Korean Fuel Assembly(KOFA). The experimental apparatus was designed for load conditions, uniformly distributed load and displacement. Test method using whiffle tree of uniformly distributed load has been comparatively conservative. The test results were compared with those of finite element analysis and the test method on bottom end piece was established.

• Journal of Veterinary Clinics
• /
• v.21 no.3
• /
• pp.323-325
• /
• 2004

A 5-month old female Alaskan Malamute was referred to Veterinary Teaching Hospital, College of Veterinary Medicine, Kyungpook National University because of accidental ingestion of a box of staples. Clinical signs included anorexia, hematemesis, panting and depression. An aggregation of staples of 5 cm in diameter in the stomach, 4 pieces of staple in the small intestine and approximately 20 pieces in the rectum were identified in radiographic examination. A mass of staples in the stomach was removed surgically and some staples in the intestine passed without impediment through the gastrointestinal tract.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.55-64
• /
• 1999

Large size shipyards have peformed the generating of piece and the nesting using shipbuilding-oriented CAD program, which requires higher skilled operators and lots of costs. So, medium and small size shipyards have pursued different types of piece generation and nesting (arrangement method). This research is to develop a program for the generating of pieces with parametric macro method and a STRIP program for the nesting of pieces by PC, which can be applied in such shipyards.

• Journal of the Korean Society of Costume
• /
• v.53 no.4
• /
• pp.177-186
• /
• 2003

This study is based on the observation of clothes excavated from of YeoHung Min( 1586∼1656)'s grave, which enable to understand of woman's funeral clothes among upper class in mid 17C. Lady Min buried with her husband Jung (Clan of Dong Rae)'s grave where located in KwanAk gu, Seoul was move out another place in 1989. During excavation of the grave, 31 pieces form 5 different type of clothes and total 18 pieces form 8 different from Lady Min (Clan of YeoHung). Remarkable finding from the excavated clothes is the Nuwooli(veil) which is known to be discovered first time in Korea, and a piece of tooth, which is related with funeral custom of those day, and cotton seeds are found from chima(skirt) and Jogori(jacket). Jangot(coat) has been used for the use of over garment assuming the changes of Jogori form during mid of Josun dynasty. It is also remarkable that padded and quilted clothing is still being commonly used until mid-l7C.