• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.592-595
• /
• 2013

Advent of Wireless Sensor Networks (WSN) has provided potentials to a variety of construction applications. It is well appreciated that WSNs have advantages over traditional wired system, such as ease of installation and maintenance with increased cost savings and efficiencies. However, the obstruction of wireless signal from physical objects in the heterogeneous construction environment often brings challenges to WSN measurement system. This paper analyzed the obstruction characteristic of construction environment where construction materials, equipment, and built structures obstruct the wireless signal yielding negative effect of measurement system. By adopting evaluation criteria, such as packet reception rate, field experiments have been implemented to quantitatively identify the interference of wireless signal from penetration, reflection, and network traffic under the construction environment. The results show that reliable performance of wireless sensor in construction environment depends on the optimal separation distance between a receiver and a transmitter, obstruction types, obstruction thickness, and transmission interval. In addition, the methodology and experimental results of this paper could be used in the practical design of network topology when hundreds of sensor nodes form a mesh network in the large scale construction applications.

• Journal of KIISE
• /
• v.43 no.12
• /
• pp.1404-1411
• /
• 2016

Network virtualization is a technique that abstracts the physical network to provide multiple virtual networks to users. Virtualized network has the advantage to offer flexible services and improve resource utilization. In SDN architecture, network hypervisor serves to virtualize the network through address virtualization, topology virtualization and policy virtualization. Among them, address virtualization refers to the technique that provides an independent address space for each virtual network. Previous work divided the physical address space, and assigned an individual division to each virtual network. Each virtual address is then mapped one-to-one to a physical address. However, this approach requires a lot of flow entries, thus making it disadvantageous. Since SDN switches use TCAM (Ternary Contents Addressable Memory) for the flow table, it is very important to reduce the number of flow entries in the aspect of cost and scalability. In this paper, we propose a LISP based address virtualization, which separates address spaces for the physical and virtual addresses and transmits packet through tunneling, in order to resolve the limitation of the previous studies. By implementing a prototype, we show that the proposed scheme provides better scalability.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.56-63
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. Mobile sink node distribute energy consumption therefore network life time was increased than fixed sink node. The energy efficient is important matter in wireless body area network because energy resource was limited on sensor node. In this paper we proposed cluster topology algorithm for efficient data transmission in wireless body area network based mobile sink. The proposed algorithm show good performance under the advantage of grid routing protocol and TDMA scheduling that minimized overlap area on cluster and reduced amount of data on cluster header in error prone wireless sensor network based on mobile sink.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.3
• /
• pp.150-161
• /
• 2017

This study was conducted with the data of monitoring on soil chemical properties of rice paddy soils in Gyeongbuk Province. The selected soil chemical properties were analyzed every 4 year from 1999 to 2015. The soil pH measured in 2015 was higher than pH 6.0, which was 0.3-0.4 pH unit higher than data until 2007 survey year. The mean content of organic matter was greater than $24g\;kg^{-1}$ since 2003, but 35% of soil samples remained below the recommended level ($20-30g\;kg^{-1}$) in 2015. The mean concentration of available phosphate was maintained at $40mg\;kg^{-1}$ higher than the upper recommendation level ($80-120mg\;kg^{-1}$), and more than 40% of paddy soils tested were found to have less than the recommendation level during the survey period. The exchangeable K concentration ranged from 0.25 to $0.39cmol_c\;kg^{-1}$. Exchangeable Ca showed an average at the optimum range ($5.0-6.0cmol_c\;kg^{-1}$) during the monitoring period. Exchangeable Mg decreased linearly ($0.02cmol_c\;kg^{-1}\;year^{-1}$) from $1.55cmol_c\;kg^{-1}$ as of 1999 to below the lower level of the recommendation range ($1.5-2.0cmol_c\;kg^{-1}$). The amount of available $SiO_2$ was increased significantly from 2011 to over the recommendation level (${\geq}157mg\;kg^{-1}$). It was revealed that the soil chemical properties of rice paddy fields was influenced by topology, soil texture, type and region as result of principal component analysis or cluster analysis. Therefore, an assessment on chemical properties of rice paddy soils should be performed to consider various soil physical conditions and agronomic practices such as fertilization, cropping system, and so on. Because of the high variability of nutrient levels across Gyeongbuk Province, nutrient management based on soil fertility test is required by respective farm land unit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.701-712
• /
• 2012

The concept of $k$-shortest disjoint paths is considered important because the establishment of primary and backup forwarding paths exploiting shorter distance and faster propagation time is a dominant consideration for the design of a survivable backbone network. Therefore, we need to evaluate how well the concept of $k$-shortest disjoint paths is exploited for the design of a survivable ship backbone network considering the international standard related to ship backbone networks, the IEC61162-410 standard specifying how to manage redundant message transmissions among ship devices. Performance evaluations are conducted in terms of following objective goals: link capacity, hop and distance of primary and backup paths, even distribution of traffic flows, restoration time of backup forwarding paths, and physical network topology connectivity.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.12
• /
• pp.656-664
• /
• 2007

Field-Programmable Gate Arrays (FPGAs) are a revolutionary new type of user-programmable integrated circuits that provide fast, inexpensive access to customized VLSI. However, as the target application speed increases, power-consumption and wire-delay on interconnection become more critical factors during programming an FPGA. Especially, the interconnection of the FPGA consumes 65% of the total FPGA power consumption. A previous research show that if the length of interconnection is shirked, power-consumption can be reduced because an interconnection has a lot of effect on power-consumption. For solving this problem that reducing the number of wires routed, the three dimension FPGA is proposed. However, this structure physical wires and an area of switches is increased by making topology complex. This paper propose a novel FPGA architecture that modifies the three dimension FPGA and compare the number of interconnection of Virtex II and 3D FPGA with the proposed FPGA architecture using the FPGA Editor of Xilinx ISE and a global routing and length estimation program.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1231-1242
• /
• 1997

This paper deals with an IP mukticast protocol in support of host mobility. Most of the previous multicast schemes have utilized an underlying logical strucuture of network topology,in order to provide a certain degree of order and predictability.On the other hand,mobility implies that a host location relaative to the rest of the net-work changes with time;the physical connectivity of the entire network is thus modified as move.In this case.some multicast datagrams nay not delivered properly,or may delivered twice or more,to a mobile host because the destinations will keep moving whlist datagrams are dekivered with different time delay.This paper first describes the relation between host mobility and multicast, by exploring the possible interactions,and presents a multicast scheme in support of Internet host mobility.A revised scheme is then proposed to adapt the multicast semantic and to optimize the communication overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.144-153
• /
• 2006

In this paper, we propose an efficient video data transmission protocol using the cross-layer approach in ad hoc networks. Due to node movement, the MANET is frequently changing path and each path has different transmission rate so that it has low performance when transmitters select a constant transmission late at the encoding time. Because MANET is running limited energy, efficient energy management is important because it increases network life time and network throughput. Therefore we need an effective video transmission method that considers physical layer channelstatistics, node's energy status, and network topology changes at the same time unlike the OSI recommendation protocol in that each layer isindependent and hard to transmit adaptively video data according to the network conditions. Therefore, in this paper we propose a cross-layer effective video transmission protocol and mechanism that can select an optimal path using multilayer information such as node's residual energy, channel condition and hop counts and can determine the adequate coding rate adaptively.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1993-1997
• /
• 2008

In the present work, Diels-Alder reaction of cyclopentadiene with ethylacrylate has been carried out by using two types of mesoporous solid acid catalysts (Al-MCM-41, Al-MCM-48) with different pore structures. The specific topology of Al-MCM-48 (cubic Ia3d structure composed of two independent 3-D channel systems) exhibit higher activity and stereo-control than those of Al-MCM-41 (hexagonal packing of 1-D channels). The physical properties of Al-MCM-48 catalyst, such as high accessibility of reactants to the acid sites, spatial confinement in the nanoscopic reactors, and 3-D channel network structure that are effective adsorption and diffusion of reactants, play a crucial role in the present study.