• The Research Journal of the Costume Culture
• /
• v.13 no.3 s.56
• /
• pp.344-360
• /
• 2005

The purpose of the study is to identify the physical characteristics of early adolescent boys, to classify body shapes by physical characteristic. The subjects were 549 boys in the capital area. Their body shapes were identified and classified based on 47 anthropometric measurements, 43 photographic measurements and 10 indexed measurements. For data analysis were performed descriptive statistics, factor analysis, cluster analysis, ANOVA and Duncan test using SPSS Ver. 10. According to the result of extracting factors indicating the characteristics of body shape, horizontal size, vertical length, lateral posture, the lateral shape of the abdomen and the hip, the shape of the back protrusion, the front shape of the trunk and was the shape of the shoulders. According to the result of classifying body shapes, four types of shape - T(Tall) type, P(Petite) type, L(Large) type and R(Regular) type were identified. The results of this study are expected to contribute to planning sizes according to the type of body shape and improving the fitness of ready-made clothes in apparel and school uniform manufacturers.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.51-56
• /
• 1997

This study is aimed for investigating the influence of mortar on improved of surface shape of crushed sand, and analyzing the physical properties of fresh state and hardened state. By the test results, it was found that the flow value and bleeding ratio was increased, but the change of flow value according to time was decreased with the improved surface shape of crushed sand. Also, comparing improved of surface shape of crushed sand with not improved of surface shape of crushed sand on strength, compressive strength is about the same and flexural strength decrease in case of improved of surface shape of crushed sand.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.1
• /
• pp.11-18
• /
• 1999

The objective of this study are to figure out the physical attributes of the three predictors in the Informational Approach: complexity, coherence, mystery and to investigate the relationships between these attributes and the preference exploratively. Visual inspection of the scenes relative to their rated levels of the predictors revealed the existence of relationship between these variables and the physical attributes. The following are the summary of the relationship between three predictors and the physical attributes: (1) The level of complexity was associated with the pattern of physical attributes which were the amount of facility, line, shape, color plant and arrangement of the visual elements. (2) The level of coherence was related with the regular arrangement of the visual elements. For example, there was certain pattern founded the color, shape, texture was applied to the various space repetitively and symmetrically. (3) The level of mystery had the relationship with the physical attributes of screen, spatial definition, distance of view, physical accessibility, radiant forest, the depth of space.

• Smart Structures and Systems
• /
• v.24 no.2
• /
• pp.193-207
• /
• 2019

This study concerns with morphing structures, e.g. as applied in the aerospace industry. A morphing aerofoil structure capable of variable geometry was developed, which was shown to be able to cater for the different aerodynamic requirements at different stages of flight. In this work, the useful and relatively simple method has been applied, which provides a direct method for calculating required morphing shape displacements via finding the most effective bar through calculating bar sensitivity to displacement and calculating set of length actuations for bar assembly to control/adjust shape imperfection of prestressable structural assemblies including complex elements ("macro-elements", e.g., the pantographic element), involving Matrix Condensation. The technique has been verified by experiments on the physical model of an aerofoil shaped morphing pantographic structure. Overall, experimental results agree well with theoretical prediction. Furthermore, the technique of multi-iteration adjustment was presented that effective in eliminating errors that occur in the practical adjustment process itself. It has been demonstrated by the experiments on the physical model of pantographic morphing structure. Finally, the study discusses identification of the most effective bars with the objective of minimal number of actuators or minimum actuation.

• Korean Journal of Human Ecology
• /
• v.4 no.2
• /
• pp.123-140
• /
• 2001

The purpose of this study is to find the suitable suit design of mid-aged men by examining visual effects in Physical and Psychological side aspects. I used convenience sampling by considering sex and age distribution. These methods were used to analyze data that were frequency analysis, variate analysis, centesimal scale, primary factor analysis, three primary variate analysis, duality variate analysis, equation variate analysis and Cronbach's multiplex range verification 1. Image perception of men's suit was analyzed with arrangement, numbers of button, pattern and the shape of one's body and was divided into charming, youthfulness, modernism. affection and manly. 2. 1) There are partly resemblance difference in physical visual effect by the shape of body and suit design. 2) There are partly resemblance differences in psychological visual effect by one's shape and suit design. In conclusion arrangement, number of button and Pattern are very important to give an effect on whole visual effect man's suit. Also, these were felt differently in each types of body Therefore it is confirmed that the type of body is important fluent to make people perceive.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.3
• /
• pp.98-108
• /
• 2005

The assembly line balancing problem has been focused by many research works because the efficient management of the assembly line might influence not only the quality of the products but also the working conditions for the workers. This paper deals with U-shape mixed-model assembly line balancing and considers both the processing time and the physical workloads. We suggest the goal programming approach for this situation and to overcome some difficulties of finding optimal solution, we adopt the genetic algorithm that is one of the most promising solution techniques. We tested several test problems and present the results that indicate some improvement for the line balancing as well as the stable performance of the algorithm.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.5
• /
• pp.277-283
• /
• 2016

Unreinforced masonry (URM) buildings are known to be highly vulnerable to seismic loadings. Although significant physical variation may exist for URM buildings that fall into a same structural category, a single set of fragility curves is typically used as a representation of the seismic vulnerability of the URM structures. This study investigates the effect of physical variation of URM structures on their seismic performance level. Variables that describe the physical variation of the structure are defined based on the inventory analysis. Seismic behavior of the structures is then monitored by changing the variables to investigate the effect of each variable. The analysis results show that among the variables considered the seismic performance of URM building depends on the variation of the width, the aspect ratio, and the number of story. The need for further research on the modeling of the connections between the walls and diaphragms and the torsional effect is also addressed.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2011

This study investigates the physical properties and manufacturing method of shape memory fabric for emotional garment made by polypropylene. For this purpose, polypropylene(PP) POY and SDY were texturized using low temperature and constant length heat treatment texturing technologies, respectively. The shape memory fabrics made using these texturized PP yarns were woven with two kinds of PET and PTT shape memory yarns on the air-jet loom and the various physical properties of four kinds of shape memory fabrics were measured and discussed. The tenacity and breaking strain of PP texturized yarns treated by low temperature and constant length heat treatment showed high weaving efficiency and the wet thermal shrinkage of PP textured yarns was shown less than 1.5%, dry thermal shrinkage was ranged between 3% and 5%, which means thermal stability compared to the PTT textured yarn with high thermal shrinkage, 5~8%. The shape memory characteristics of PP shape memory fabrics measured by Toray method showed five grade as same value as PTT shape memory fabric. The heat keeping property of the PP shape memory fabric showed 56% higher value than that of PTT shape memory fabric. The water repellency of PP shape memory fabric measured by spray method showed five grade as same value as PTT shape memory fabric treated with water repellent agent. Especially, shape memory properties of PP shape memory fabric measured by 3-D image and camera measurement methods showed similar characteristics to the PTT shape memory fabric.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.84-91
• /
• 2001

The purpose of this thesis is to search for appropriate design elements to manage ponds on golf courses. This paper showed that a variable, width, and volume have significant influence on satisfaction(Sig 0.001). This research investgated golf courses in Kyung-ki province. In short, we measured the physical design elements of ponds to bring out major factors which could determine satisfaction of golf courses for golfcourse manager(greenkeeper). The results between satisfaction and physical variable came out as follows; 1, Golfcourse managers(Green keepers) responded to questions that they were satisfied in only 29.9% of the ponds. We found that they considered management very highly. we could evaluated the value of necessity and importance are high, that is importance to manage ponds 2. Some physical design elements(volume, width) increased dependent variable(satisfaction) and others(length, area, circumference, index of shape) decreased dependent variable(satisfaction) 3. Volume has an influence on dependent variable more than depth on index of shape. 4 If the result of \`index of shape\` decreased, the result of \`management satisfaction\` would be high, and when volume is 8500ton∼17000ton, depth is 27m∼3.1m, \`management satisfaction\` would be high. The research findings can be used for planning and designing of golfcourses for designers, and by management for greenkeepers, and will provide pertinent design elements far design of golfcourses. We suggest that the interrelation between ponds and strategic play must be examined in future research.

• Journal of computational fluids engineering
• /
• v.17 no.4
• /
• pp.56-68
• /
• 2012

Nowadays, Unmanned Combat Air Vehicle(UCAV) has become an important aircraft system for the national defense. For its efficiency and survivability, shape optimization of UCAV is an essential part of its design process. In this paper, shape optimization of UCAV was processed for aerodynamic performance improvement and Radar Cross Section(RCS) reduction using Multi Objective Genetic Algorithm(MOGA). Lift and induced drag, friction drag, RCS were calculated using panel method, boundary layer theory, Physical Optics(PO) approximation respectively. In particular, calculation applied Radar Absorbing Material(RAM) was performed for the additional RCS reduction. Results are indicated that shape optimization is performed well for improving aerodynamic performance, reducing RCS. Further study will be performed with higher fidelity tools and consider other design segments including structure.