• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.8
• /
• pp.1190-1202
• /
• 2009

A 3D body scan measurement (SM) is used as an alternative to physical measurements (PM) as the information for designing industrial products. This study compared the mean difference (MD) between SM and PM by gender and analyzed the causes of the difference. The data used in this study were the scan measurements and physical measurements of adults aged twenty to seventy years old of the fifth Size Korea survey. The results of this study are as follows: 1. The comparison of MD between men and women for all subjects: The measurement of the significant differences between men and women were height, neck base girth, chest girth, under-bust girth, waist girth, armscye girth, back length, and foot length. The causes of difference are the difference of body shape. 2. The comparison of MD between men and women by BMI groups: Many measurements had significant differences between men and women at normal weight and overweight but underweight. Some measurements had significant differences only at a specific BMI group because the body shape difference between men and women is revealed clearly in the group. The comparison of MD between men and women by age groups: The measurements that show significant difference at more than four age groups were neck girth, chest girth, under-bust girth, waist girth, armscye girth, and foot length. The height and abdomen girth had a significant difference in the age range of 20's and 30's. There were measurements that increase MD with an increase in age; under-bust girth and lateral shoulder length for women and lateral shoulder length for men. This comparison of MD between men and women provide the correct guidelines for the use of SM.

• Journal of Korea Multimedia Society
• /
• v.11 no.8
• /
• pp.1146-1159
• /
• 2008

This paper proposes a method for determining material property of a haptic model which represents the haptic behavior of a target object. This paper also presents a haptic rendering framework. We adapt elastography to obtain the physical property of a target object. One of the key differences between the proposed framework and a traditional method is that the physical property of the target object can be easily set into a haptic model. For evaluating the proposed method, we construct a real-time palpation prototype simulator. In our work, a human liver is selected as a target object and the liver is represented by Shape-retaining Chain Linked Model(S-chain model) for satisfying the real-time performance. We conduct experiments whether a user easily distinguishes abnormal portions from normal portions. From the experimental results, we evaluate that the proposed method provides the discriminable force to users in real-time.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.65-70
• /
• 2012

Structural changing materials which can induce the physical deformation of materials are interesting research topics with various potential applications. Particularly, light among many driving mechanisms is a non-contact energy source, hence the light-responsive system can be used where non-destructive, local irradiation, and remote control is needed. Here, a mainchain azobenzene polymer is synthesized and its physical and optical properties are observed and compared to that of a polymer having a light-responsive azobenzene moiety on its side chain. Further dispersion onto polyvinylalcohol hydrogel is made and its dual stability and actuation are observed upon UV-visible light irradiation. Extended azobenzene polymer blend films show an anisotropic light-actuation with non-polarized UV light at room temperature. This physical shape change is quite reversible and occurs at lower temperature than that of any other reported systems including liquid crystalline elastomers. It is successfully demonstrated that the simple physical azobenzene/polymer blending has a very good actuation compared to that of LCEs which need an elaborate chemical design and it can be further used in the areas requiring a dimensional shape change.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.53-61
• /
• 2001

This study was carried out to evaluate the effect of coating pigments on the printability by investigating the pore structure of casting layer such as the number, size and distribution of pores and the pore rate. The coating structure was mainly determined by the interaction between pigment and binder. It means that the structure of pores was chiefly affected by the shape and size distribution of pigments and their packing rate. The physical properties of pore have close relationships with ink set-off, the speed of ink penetration and printing gloss. The results suggested that the rate and number of pores were greatly affected by the particle size distribution and shape of pigments. The rate of pore increased with the reduction of particle size distribution of pigments. Calcite was effective to improve greatly the printability of coated paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.8-14
• /
• 2007

The geometry in the weight reduction design is very required to be started from the conceptual design with low cost, high performance and quality. In this point, a topological shape fur optimization concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the applications, the technology of weight reduction design is applied on designs of aluminum control arm and inner panel of hood.

• Journal of the Korean Home Economics Association
• /
• v.33 no.4
• /
• pp.149-155
• /
• 1995

In this study, the formative property of flare skirts is carry out by the shape horizontal sections of hem line. Flare skirts was made by 10 kinds of fabrics with different physical properties. the length of flare skirts was 60cm. The main results obtained are as follows ; 1, The shape horizontal sections of hem line has differed with number of nodes and fabrics properties, in direction of texture. 2. According to the fabrics analysis of drapability decreased in order from Polyester/nylon(20/80)>Polyester(twill, thickness 0.2441)>Polyester(plain, thickness0.3760)>Polyester(plain, thickness 0.3687)>Polyester(plain, thickness 0.3101). 3. The correlation between the number of nodes and wave-height of modes and breadth showed a high negative correlation with the drapability of fabrics.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.55-58
• /
• 2015

Natural shifting of rivers has been disturbed by anthropological activities. Urbanization in Kathmandu has been encroached the natural floodplain of Bagmati and currently channeled by training walls. The study compares the change in shape of Dhobikhola, a small tributary using 1966 and 2014 satellite images. It has been found that the original shape is heavily changed over time at the beginning and end section of river under study. The river width is now fixed by training walls and roads along the banks. Using multiple data sets like satellite images and GIS analysis, these shifts can be easily detected to plan for management and restoration of physical and ecological behaviors of rivers.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.97-104
• /
• 2006

The geometric configuration in the weight reduction designis very required to be started from the conceptual design with low cost, high performance and quality. In this point, a structural-topological shape concerned with conceptual design of structure is important. The method used in this paper combines three optimization techniques, where the shape and physical dimensions of the structure and material distribution are hierachically optimized, with the maximum rigidity of structure and lightweight. As the results, the technology of weight reduction design is considered in designs of aluminum control arm and inner panel of door.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.261-262
• /
• 2003

Shape memory polyurethane (PU) with soft and hard segments has been extensively researched since its discovery by Mitsubishi in 1988 [1]. Hard segments can be formed via hydrogen bonding and crystallization, function as physical crosslinks below melting point (Tm). The reversible phase transformation of the soft segment is responsible for the shape memory effect. (omitted)

• Structural Engineering and Mechanics
• /
• v.10 no.5
• /
• pp.491-504
• /
• 2000

This paper is a presentation of a physical model for the elastic-partly plastic behavior of rectangular hollow section pinned struts subjected to static cyclic axial loading and the evaluation of the compressive strength of retrofitted damaged struts. Retrofitting is achieved by welding stiffening plates along the webs of damaged struts. The shape of the elastic and permanent deformations of the strut axis satisfy the conditions at the ends and midspan. Continuous functions of the geometric variables of stress distributions in the yielded zone are evaluated by interpolation between three points along each partly plastic zone. Permanent deformations of the partly plastic region are computed and used to update the shape of the unloaded strut. The necessity of considering geometric nonlinearity is discussed. The sensitivity of the results to the location of interpolation points, the shape of the permanent deformation and material hysteretic properties is investigated.