• The Journal of Korean Medicine
• /
• v.25 no.1
• /
• pp.1-20
• /
• 2004

Objectives : Based on the analysis of Yin-Yang[음양] characteristics and symptoms, each person is classified into Yin-Yang. Also the validity of the result is statistically analized. Methods : From Feb. to May. 2003, the data were collected through a questionnaire given to 690 patients. The questionnaire was composed of 34 items which were about personality, habit, sweat, response to coldness, thirst, bowel, urine, physical shape, and menstruation for women only. SD(Semantic Differential Technique) used for each item, each item is measured as a contrast of two opposite symptoms. Reliability analysis was used to select items and categories. Based on means of items in each category the Yin-Yang index was developed. The validity of Yin-Yang index was investigated using classification and clustering analysis. In statistical analysis, SPSS V10.0.7 PC was used. Results : The obtained results are summarized as follows: 1) We constructed Yin-Yang index based on the middle point of the sum of categorical means. Then we classified each person into Yin or Yang. 2) To investigate the validity of the distribution of personal Yin-Yang degree, the crosstabulation of results from clustering and classification was used. The hit ratio for classification was much higher than Maximum Chance Criterion($C_{max}$), and concurrence in crosstabulation was successful. Therefore we can infer that the distribution of Yin-Yang was valid. Conclusions : Based on Yin-Yang characteristics and symptoms, we was analyzed personal degree of Yin-Yang, and confirmed the validity of its distribution. Therefore this index can be used further for Bian-Zheng [변증] and classification of the constitution.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.101-105
• /
• 2002

FRP(Fiber glass reinforced plastics) is compound with materials, which are created to combine each other materials, of which nature of mechanical and chemical are different. Even though the weight and the thickness are identic, its physical figure of characteristic changes with consisting of lay-up and work situation. It is also a method of creating after manufacturing of mould. It has feature that manufacturing of FRP runs parallel design of material with design of structure simultaneously. The rule of FRP structure is distinguished from the length of a ship and it is hard to catch the feature of structure mechanics due to identical formula and figure used for it regardless of the shape of a ship or the speed. This studying, basing on a small FRP ship, will show te fundamental data needed to design of structure analysing the feature of intensity with direction, the method of Lay-up, and the characteristic of materials of FRP.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.1
• /
• pp.10-17
• /
• 2007

Numerical results from the "figure-of-eight" motion of Phormia-Regina in Part 1 indicate that vortical structure and vortex dynamics do play a critical role in lift and thrust generation. The aerodynamic force generation of insects' wing could be governed by aerodynamic parameters such as Reynolds number; kinematic parameters such as frequency, amplitude, and component of the figure of eight motion; and morphological parameters such as wing shape and the number of wing. In the present work, the effects of Reynolds number, reduced frequency and motion component are investigated in detail to clarify aerodynamic characteristics of insect wing. Through numerical results and their physical interpretation, the mechanism of aerodynamic force generation is presented more clearly. Rotation turns out to be the most important component in thrust generation and subsequent counterclockwise rotational circulation is closely related with thrust generation.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.173-180
• /
• 1999

Thermally evaporated ZnTe films were investigated as a back contact material for CdS/CdTe solar cells. Two deposition methods, coevaporation and double-layer methods, were used for Cu doping in ZnTe films. ZnTe layers (0.2$\mu\textrm{m}$ thick) were deposited either on glass or on CdS/CdTe substrates without intentional heating of the substrates. Post-deposition annealing was performed at 200,300 and $400^{\circ}C$ for 3,6 and 9 minutes, respectively. Band gap of 2.2eV was measured for both undoped and doped films and a slight change in the shape of absorption spectra was observed in Cu-doped samples after annealing at $400^{\circ}C$. The resistivity of as-deposited ZnTe decreased from 10\ulcorner~10\ulcornerΩcm down to 10\ulcornerΩcm as Cu concentration increased from 0 to 14 at.%. There was not a noticeable change in less of annealing temperature up to $300^{\circ}C$ whereas films annealed at $400^{\circ}C$ revealed hexagonal (101) orientations as well. Some of Cu-doped ZnTe revealed x-ray diffraction (XRD) peaks related with Cu\ulcornerTe(x=1.75~2). Grain growth was observed from about 20nm in as-deposited films to 50nm after annealing at $400^{\circ}C$ by scanning electron microscopy (SEM). Cu distribution in ZnTe films was not uniform according to Auger electron spectroscopy (AES) measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.945-952
• /
• 2013

The R wave of QRS complex is the most prominent feature in ECG because of its specific shape; therefore it is taken as a reference in ECG feature extraction. But R wave detection suffers from the fact that frequency bands of the noise/other components such as P/T waves overlap with that of QRS complex. ECG signal processing must consider efficiency for hardware and software resources available in processing for miniaturization and low power. In other words, the design of algorithm that exactly detects QRS region using minimal computation by analyzing the person's physical condition and/or environment is needed. Therefore, efficient QRS detection based on SOM(Subtractive Operation Method) is presented in this paper. For this purpose, we detected R wave through the preprocessing method using morphological filter, empirical threshold, and subtractive signal. Also, we applied dynamic backward searching method for efficient detection. The performance of R wave detection is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate the average of 99.41% in R wave detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1171-1180
• /
• 2010

In wireless sensor networks, reliable event detection is one of the most important research issues. For the reliable event detection, previous works usually assume the events are only individual objects such as tanks and soldiers. Recently, many researches focus on detection of continuous objects such as wild fire and bio-chemical material, but they merely aim at methods to reduce communication costs. Hence, we propose a reliable continuous object detection scheme. However, it might not be trivial. Unlike individual objects that could be referred as a point, a continuous object is shown in a dynamic two-dimensional diagram since it may cover a wide area and it could dynamically alter its own shape according to physical environments, e.g. geographical conditions, wind, and so on. Hence, the continuous object detection reliability can not be estimated by the indicator for individual objects. This paper newly defines the reliability indicator for continuous object detection and proposes an error recovery mechanism relying on the estimation result from the new indicator.

• Journal of Powder Materials
• /
• v.21 no.6
• /
• pp.467-472
• /
• 2014

RBSC (reaction-bonded silicon carbide) represents a family of composite ceramics processed by infiltrating with molten silicon into a skeleton of SiC particles and carbon in order to fabricate a fully dense body of silicon carbide. RBSC has been commercially used and widely studied for many years, because of its advantages, such as relatively low temperature for fabrication and easier to form components with near-net-shape and high relative density, compared with other sintering methods. In this study, RBSC was fabricated with different size of SiC in the raw material. Microstructure, thermal and mechanical properties were characterized with the reaction-sintered samples in order to examine the effect of SiC size on the thermal and mechanical properties of RBSC ceramics. Especially, phase volume fraction of each component phase, such as Si, SiC, and C, was evaluated by using an image analyzer. The relationship between microstructures and physical properties was also discussed.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.111-125
• /
• 2013

This study focused on making technique and usage of potteries from Proto-Three Kingdom to Baekje Kingdom in Balanri Site. The potteries were divided into four groups, Jungdo type I, Jungdo type II, Tanalanmun type and the Baekje type on the basis of the shape and physical properties. The Jungdo type potteries were used as kitchen wares, showing mostly yellowish brown color. The Tanalanmun type potteries were used as storages, showing gray green color. Firing temperature of the Jungdo type and the Baekje type potteries were presumed to be fired at 900 to $940^{\circ}C$, whereas the Tanalmun type potteries were fired at around 900 to $1,100^{\circ}C$. This is indicated that the firing condition was adjusted according to the purposes of the potteries. On the one hand, the Balanri potteries were made of paleo-soil which was collected in very near place from the site based on geochemical characteristics of the pottery clays and the soil.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.10
• /
• pp.1664-1670
• /
• 2018

Titanium dioxide ($TiO_2$) has wide applications in food, cosmetics, pharmaceuticals and manufacturing due to its many properties such as photocatalytic activity and stability. In this study, the biosynthesis of $TiO_2$ nanoparticles (NPs) was achieved by using Baker's yeast. $TiO_2$ NPs were characterized by X-ray Diffraction (XRD), UV-Visible spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray analysis (EDX) studies. The XRD pattern confirmed the formation of pure anatase $TiO_2$ NPs. According to EDX data Ti, O, P and N were the key elements present in the sample. SEM and TEM revealed that the nanoparticles produced were spherical in shape with an average size of $6.7{\pm}2.2nm$. The photocatalytic activity of $TiO_2$ NPs was studied by monitoring the degradation of methylene blue dye when treated with $TiO_2$ NPs. $TiO_2$ NPs were found to be highly photocatalytic comparable to commercially available 21 nm $TiO_2$ NPs. This study is the first report on antimicrobial study of yeast-mediated $TiO_2$ NPs synthesized using $TiCl_3$. Antimicrobial activity of $TiO_2$ NPs was greater against selected Gram-positive bacteria and Candida albicans when compared to Gram-negative bacteria both in the presence or absence of sunlight exposure. $TiO_2$ NPs expressed a significant effect on microbial growth. The results indicate the significant physical properties and the impact of yeast-mediated $TiO_2$ N Ps as a novel antimicrobial.

• Archives of Plastic Surgery
• /
• v.35 no.2
• /
• pp.219-222
• /
• 2008

Purpose: The purpose of this study is to develop hydroxyapatite cement simplified procedures for reconstruction of craniofacial deformities. Due to its expense and characteristics of quick hardening time, it may be inappropriate for forehead reconstruction or augmentation. Therefore we hear by introduce a more precise, easy and cheap method. The authors report forehead reconstruction with hydroxyapatite cement for a patient who suffered from craniofacial deformity. Methods: Case report and literature review. Results: A 35 year old man came to us with forehead and temporal area depression. He had a history of brain operations due to traumatic epidural hematoma. A physical exam showed an evidence of right side forehead weakness sign. Authors made RP model of his skull and applied check framework with Kirschner's wires for measuring accurate volume and contour on the depressed right side forehead area on the RP model. After complete exposure of defect area by bicoronary insicion, absorbable plate which applied on skull area was removed. Using three Kirschner's wires, authors made check framework on the right forehead lively and fixed with 2-hole miniplates on the boundary of the defect. After checking asymmetry, hydroxyapatite was applied on check shape framework just above Kirschner's wire. After removing Kirschner's wire, we corrected minimal unbalance and contour with bur. Conclusion: Check framework with Kirschner's wire was very convenient and cost saving methods for forehead reconstruction with hydroxyapatite cement.