• Korean Journal of Community Nutrition
• /
• v.19 no.4
• /
• pp.372-385
• /
• 2014

Objectives: The purpose of this study was to develop web-based self-nutrition management u-Health program for diabetic patients (DMDMG: Diabetes Mellitus Dietary Management Guide) for achieving systematic self-management of diet. Methods: The program consisted of five parts with different contents according to the results of needs assessment. Five major parts were 1) meal management part which contains calorie prescription, meals recording and dietary assessment, 2) prevention of disease part with information of diabetes and assessment of dietary behavior, 3) dietary behavior modification part with an education on dietary behavior modification plan and dietary behavior plan, 4) meal plan containing a training section for meal plan and self constructing part for meal planning by making tables, and 5) information about myself which composed with general and physical information. The system proposed in this study provides nutrients intake results right after input of diet intake, which is possible with simultaneous calculation of input data in the server with 3,495 food and 1,821 meal data base. The nutrients analysis program was evaluated with 26 diabetic patients with two-day 24 hr recall. Results: The differences of nutrients intakes between DMDMG and CANPRO 3.0 ranged from 13.5-16.5%, which was caused by the differences of databases of the two programs. The characteristics of DMDMG were; 1) it can provide an interactive tailored nutrition management, 2) it is a practical tool of diabetes nutritional management, 3) the program gives motivation for the dietary behavior modification. Conclusions: The effectiveness of whole program needs to be conducted, but the program was an innovative tool for self-management of nutrient intakes, diet behaviors, meal management and tailored nutrition education.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.47-53
• /
• 2010

A performance test of a 75 ton class turbopump inter propellant seal is conducted using water to evaluate leakage and endurance performance. Each fuel pump side part and oxidizer pump side part of a prototype inter propellant seal has been tested for verifying endurance performance during total accumulated test time 2,100 sec in water. The fuel pump side part with 1 stage carbon floating ring seal shows average leakage rate 13.7 gram/sec under average seal differential pressure 9.4 bar. On the other hand, the LOx pump side part with 2 stage carbon floating ring seal shows average leakage rate 7.3 gram/sec under average seal differential pressure 9.5 bar. After the endurance performance test, the inter propellant seal shows good physical condition. A cryogenic leakage performance test of the inter propellant seal will be performed using LN2 in the near future.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.373-379
• /
• 2010

This study was carried out to develop a belt pick-up type one-row soybean cutter, using physical properties and production conditions of soybeans. The prototype soybean cutter consisted of 4 parts: cutting part, conveying part, collecting part, and travelling part. The prototype soybean cutter was designed to cut soybeans planted with a row spacing of 600 mm, and at a height of 30 mm from the bed bottom using a disk saw. Through various trials with different peripheral velocities of the disk saw and forward speed of the cutter, determined ranges of the peripheral velocity of the disk saw cutting soybeans stems were greater than 18.3 m/s. Spacing between pick-up belts (clearance) was in a range of 60~90 mm so that soybeans could be picked at heights greater than 25 cm, and the size and shape of the pick-up belt were determined the conventional manual harvesting method. The optimal ratio between the forward speed of cutter and the peripheral speed of pick-up belts were from 1 to 1.2 by theoretical analysis. the pick-up belts had a $35^{\circ}$ of tilted angle and $90^{\circ}$ of twisted angle to pick up soybeans safely from the plant input to the lower end of the belts and convey soybeans to the upper end of belts nearby a container. The soybeans at the rear container were dropped down on the soybean row with an interval. The effective field capacity of the prototype soybean cutter was 0.136 ha/h, reducing the working hour by 92% when compared with the manual cutting.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.34-45
• /
• 2012

In these days, restaurants are not simply used as a physical space but used as a cultural space in which people can enjoy and experience different cultures and traditional images. Moreover, from the restaurants design elements which help to form the atmosphere of the restaurants which serve food of specific country, we can see the history and traditions of that country. The additional value of the traditional decorative components which are the main factors forming the atmosphere of the restaurant will be different according to the various expressions used in the restaurant space. For this article, 12 restaurants, Norangjugory korean restaurant, Yongsusan korean restaurant, Best well-bing food restaurant, Awoolim, Mugunhwa, Ondal in Korea, and Songhelou, South Beauty, Xuxian restaurant & lounge, Beijing dadong roast duck restaurant, The horizon chinese restaurant, Dynasty jade garden in China, were selected for the field study. This study focused on a comparative analysis of the traditional decorative elements, especially, the application rate of the traditional decorative elements. The analyzed elements are nature, religious beliefs, history and culture for the intangible elements and facade, courtyard, trademark, ground, wall, ceiling, door, window, furniture and adornment for the tangible elements. After that, we analyzed the rates of the use of traditional decorative elements and modern decorative elements. Through the survey result and ratio analysis, we concluded as below. In Korean restaurant, traditionality is expressed in furnitures while, in Chinese restaurant, traditionality is expressed in decorative pattern. When it comes to the intangible elements among the traditional decorative components of the Korean and Chinese restaurants, Chinese and Korean restaurants have similarities in emphasizing the natural elements. Korean restaurants focus much on the environmentally friendly parts, while Chinese restaurants focus much on the fantastic natural atmospheres like those shown and expressed in the poems. As for religion characteristics, Chinese restaurants emphasize "geomancy" more than Korean restaurant. When it comes to the visible elements among the traditional decorative components of the Korean and Chinese restaurants, in Korean restaurants, the interior part has more traditionality than exterior part, while in Chinese restaurants, the exterior part has more traditionality than the interior part.

• Smart Structures and Systems
• /
• v.30 no.3
• /
• pp.221-237
• /
• 2022

This paper is concerned with nonlinear modeling and efficient numerical simulation of electrostrictive materials and structures. Two types of such materials are considered: relaxor ferroelectric ceramics and electrostrictive polymers. For ceramics, a geometrically linear formulation is developed, whereas polymers are studied in a geometrically nonlinear regime. In the paper, we focus on constitutive modeling first. For the reversible constitutive response under consideration, we introduce the augmented Helmholtz free energy, which is composed of a purely elastic part, a dielectric part and an augmentation term. For the elastic part, we involve an additive decomposition of the strain tensor into an elastic strain and an electrostrictive eigenstrain, which depends on the polarization of the material. In the geometrically nonlinear case, a corresponding multiplicative decomposition of the deformation gradient tensor replaces the additive strain decomposition used in the geometrically linear formulation. For the dielectric part, we first introduce the internal energy, to which a Legendre transformation is applied to compute the free energy. The augmentation term accounts for the contribution from vacuum to the energy. In our formulation, the augmented free energy depends not only on the strain and the electric field, but also on the polarization and an internal polarization; the latter two are internal variables. With the constitutive framework established, a Finite Element implementation is briefly discussed. We use high-order elements for the discretization of the independent variables, which include also the internal variables and, in case the material is assumed incompressible, the hydrostatic pressure, which is introduced as a Lagrange multiplier. The elements are implemented in the open source code Netgen/NGSolve. Finally, example problems are solved for both, relaxor ferroelectric ceramics and electrostrictive polymers. We focus on thin plate-type structures to show the efficiency of the numerical scheme and its applicability to thin electrostrictive structures.

• Journal of Veterinary Science
• /
• v.22 no.5
• /
• pp.47.1-47.10
• /
• 2021

Background: Due to multiple similarities in the structure and physiology of human and pig skin, the pig model is extremely useful for biological drug testing after subcutaneous administration. Knowledge of the differences between subcutaneous injection sites could have a significant impact on the absorption phase and pharmacokinetic profiles of biological drugs. Objectives: This study aimed to analyze the impact of administration site on pharmacokinetics and selected biochemical and hematological parameters after a single subcutaneous administration of ustekinumab in pigs. Drug concentrations in blood plasma were analyzed by enzyme-linked immunosorbent assay. Pharmacokinetic analyses were performed based on raw data using Phoenix WinNonlin 8.1 software and ThothPro v 4.1. Methods: The study included 12 healthy, female, large white piglets. Each group received a single dose of ustekinumab given as a 1 mg/kg subcutaneous injection into the internal part of the inguinal fold or the external part of the inguinal fold. Results: The differences in absorption rate between the internal and external parts of the inguinal fold were not significant. However, the time of maximal concentration, clearance, area under the curve calculated between zero and mean residence time and mean residence time between groups were substantially different (p > 0.05). The relative bioavailability after administration of ustekinumab into the external part of the inguinal fold was 40.36% lower than after administration of ustekinumab into the internal part of the inguinal fold. Conclusions: Healthy breeding pigs are a relevant model to study the pharmacokinetic profile of subcutaneously administered ustekinumab.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.652-654
• /
• 2021

Objectives : The purpose of this study is to investigate the effectiveness of McKenzie Exercise of cervical part Method : A case-controlled clinical trial was searched for the effect of McKenzie Exercise on the cervical part. From 2015 to June 2021, 8 studies were selected from the RISS database published in Korea. The selected studies included an experimental group with McKenzie Exercise and a control group with general physical therapy and stretching Results : McKenzie Exercise, ROM, muscle activion, pain, posture were improved. Conclusion : This study summarizes the results of applying McKenzie Exercise of cervical part. This study suggests for cervical function who wants to intervene in McKenzie Exercise of cervical part.

• The Journal of Korean Physical Therapy
• /
• v.17 no.3
• /
• pp.329-338
• /
• 2005

The determination of peripheral nerve conduction velocity is an important part to electrodiagnosis. Its value as neurophysiologic investigative procedure has been known for many years but normal value of digital nerve was not reported in Korea. To evaluate of digital nerve conduction velocity of median nerve for obtain clinically useful reference value and compare difference in each fingers. 71 normal volunteers(age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II was use for detected conduction velocity and amplitude of digital nerves in median nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation, ANOVA was used to compare each fingers and independent t-test was used to compare between Rt and Lt side also compare between different in genders. Conduction velocity of the right thumb was 49.77m/sec, index finger was 56.80m/sec, middle finger was 56.15m/sec and ring finger was 53.38m/sec. The left thumb was 50.48m/sec, index finger was 56.76m/sec, middle finger was 55.99m/sec and ring finger was 53.23m/sec. Amplitude of the right thumb was $64.30{\mu}V$, index finger was $73.95{\mu}V$, middle finger was $77.97{\mu}V$ and ring finger was $43.92{\mu}V$. The left thumb was $74.21{\mu}V$, index finger was $85.72{\mu}V$, middle finger was $88.06{\mu}V$ and ring finger was $47.28{\mu}V$. There were significantly difference between thumb, index, middle and ring fingers(p<.01) but there were no statistically difference between conduction velocity and amplitude of index and middle fingers(p>.01). The conduction velocity of index finger are faster than other fingers and amplitude of middle finger are greater than other fingers. The present results revealed that electodiagnosis can easily perform in index and middle finger for digital nerve of median nerve study.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.99-118
• /
• 2015

Object-oriented programming languages have been widely selected for developing modern information systems. The use of concepts relating to object-oriented (OO, in short) programming has reduced efforts of reusing pre-existing codes, and the OO concepts have been proved to be a useful in interpreting system requirements. In line with this, we have witnessed that a modern conceptual modeling approach supports features of object-oriented programming. Unified Modeling Language or UML becomes one of de-facto standards for information system designers since the language provides a set of visual diagrams, comprehensive frameworks and flexible expressions. In a modeling process, UML users need to consider relationships between classes. Based on an explicit and clear representation of classes, the conceptual model from UML garners necessarily attributes and methods for guiding software engineers. Especially, identifying an association between a class of part and a class of whole is included in the standard grammar of UML. The representation of part-whole relationship is natural in a real world domain since many physical objects are perceived as part-whole relationship. In addition, even abstract concepts such as roles are easily identified by part-whole perception. It seems that a representation of part-whole in UML is reasonable and useful. However, it should be admitted that the use of UML is limited due to the lack of practical guidelines on how to identify a part-whole relationship and how to classify it into an aggregate- or a composite-association. Research efforts on developing the procedure knowledge is meaningful and timely in that misleading perception to part-whole relationship is hard to be filtered out in an initial conceptual modeling thus resulting in deterioration of system usability. The current method on identifying and classifying part-whole relationships is mainly counting on linguistic expression. This simple approach is rooted in the idea that a phrase of representing has-a constructs a par-whole perception between objects. If the relationship is strong, the association is classified as a composite association of part-whole relationship. In other cases, the relationship is an aggregate association. Admittedly, linguistic expressions contain clues for part-whole relationships; therefore, the approach is reasonable and cost-effective in general. Nevertheless, it does not cover concerns on accuracy and theoretical legitimacy. Research efforts on developing guidelines for part-whole identification and classification has not been accumulated sufficient achievements to solve this issue. The purpose of this study is to provide step-by-step guidelines for identifying and classifying part-whole relationships in the context of UML use. Based on the theoretical work on Meta-model Formalization, self-check forms that help conceptual modelers work on part-whole classes are developed. To evaluate the performance of suggested idea, an experiment approach was adopted. The findings show that UML users obtain better results with the guidelines based on Meta-model Formalization compared to a natural language classification scheme conventionally recommended by UML theorists. This study contributed to the stream of research effort about part-whole relationships by extending applicability of Meta-model Formalization. Compared to traditional approaches that target to establish criterion for evaluating a result of conceptual modeling, this study expands the scope to a process of modeling. Traditional theories on evaluation of part-whole relationship in the context of conceptual modeling aim to rule out incomplete or wrong representations. It is posed that qualification is still important; but, the lack of consideration on providing a practical alternative may reduce appropriateness of posterior inspection for modelers who want to reduce errors or misperceptions about part-whole identification and classification. The findings of this study can be further developed by introducing more comprehensive variables and real-world settings. In addition, it is highly recommended to replicate and extend the suggested idea of utilizing Meta-model formalization by creating different alternative forms of guidelines including plugins for integrated development environments.

• Physical Therapy Korea
• /
• v.13 no.3
• /
• pp.92-101
• /
• 2006

The purpose of this study was to investigate the characteristics and the current condition of musculoskeletal pain sufferers among fitness center users. The investigation used self-reporting questionnaire with the 797 subjects. On average, the subjects were 30.6 years old, 168.8 cm in height and 65.2 kg in weight. Among them, 423 were male (53.1%) and 374 were female (46.9%). Out of them, 276 suffered from pain, (35.2%). More men felt muscle aches than women (p<.05). In terms of pain, lower back area topped the list with 44.9%, followed by the lower extremities (30.1%), the neck (17.8%) and the upper part of the body (17.8%). Dieters suffered the most from pain (86.2%) while those exercising to build strength suffered the least with 26.8%. There was a significant relationship between the purpose for exercising and the amount of pain suffered (p<.05). By kind of exercise, pain stroke aerobic exercisers disproportionately with 42.4% while it almost steered clear of exercisers for strengthening with 26.9%. There was significant relationship between the kind of exercise and pain suffered (p<.05). The type of suffering differed by body shape. A significantly higher number of overweight people experienced pain than underweight people (p<.05). 32.8% of pain sufferers commented that the pain affects their workout, and on this issue there was no gender difference (p>.05). The pain caused more difficulties in doing activities of daily living for overweight or obese peoples than underweight peoples (p<.05). More than a third of health club and fitness center users are experiencing musculoskeletal pains. Measures such as professional training or information provision is required to prevent injury or disorder caused by improper exercise.