• 전력전자학회논문지
• /
• 제21권3호
• /
• pp.207-214
• /
• 2016

Magnetic circuit is a physical modeling method that is useful in designing and analyzing power transformers, especially for a priori evaluation of leakage and magnetizing inductance before actual production. In this study, a novel modeling approach that uses PSIM magnetic elements adopting gyrator and permeance-capacitances is investigated. A formula to determine the permeance-capacitors in the core and leakage path are established, and a simulation jig is devised to link the physical model and the electrical terminal characteristics with an automated parameter determination process. The derived formula is verified by measurement results of the prototype transformer samples. Given its accuracy and simplicity, this approach is suitable for analyzing and designing LLC resonant transformers whose leakage and magnetizing inductance are very critical to circuit operation.

• 소성∙가공
• /
• 제10권7호
• /
• pp.558-564
• /
• 2001

An experimental modeling is applied to investigate the formation of forms in molten aluminum By using a specially designed equipment, the effect of process variables, such as the shape of stirrer, stirring velocity and fluid viscosity, on the formation of foams were studied in the glycerine added water. Bubbles formed in water had various diameter from 1 to 10 mm and the number of bubbles was 0 to 20/$cm^2$. It turned out that among various variables the stirring velocity and fluid viscosity played important roles on the formation of bubbles. The results obtained from the model experiment were preyed to be convincible also in the real aluminum foam.

• Geomechanics and Engineering
• /
• 제6권4호
• /
• pp.341-358
• /
• 2014

Uplift response of rectangular anchor plates has been investigated in physical model tests and numerical simulation using Plaxis. The behavior of rectangular plates during uplift test was studied by experimental data and finite element analyses in cohesionless soil. Validation of the analysis model was also carried out with 200 mm and 300 mm diameter of rectangular plates in sand. Agreement between the uplift responses from the physical model tests and finite element modeling using PLAXIS 2D, based on 200 mm and 300 mm computed maximum displacements were excellent for rectangular anchor plates. Numerical analysis using rectangular anchor plates was conducted based on hardening soil model (HSM). The research has showed that the finite element results gives higher than the experimental findings in dense and loose packing of cohesionless soil.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.297-302
• /
• 2007

Recently, electrical resistivity survey is used in the various fields and applied to urban area with many electrical noises. Therefor it's necessary to observe the electrical noise effect of the geological structure. The physical scale modeling was conducted for measuring the electric noise effect of the two geological models at various distances, depths and diameters of the electric noise objects. The results are as following. 1. When conductive noise object was vertical to the strike of geological structure and moved to the strike direction, the effect of conductive noise object at various separated distances to the measurement line was disappeared at a half distance measurement line length regardless of electrode arrays. 2. When conductive noise object was vertical to the strike of geological structure and moved to the strike direction, the effect of conductive noise object at various depths was disappeared at 4unit apart from the measurement line regardless of electrode arrays. 3. When conductive noise object was vertical to the strike of geological structure and moved to the strike direction, the effect of conductive noise object at various diameters was disappeared at 4unit apart from the measurement line regardless of electrode arrays.

• 간호행정학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2016

Purpose: The aim of this study was to investigate whether job satisfaction in clinical nurses was dependent on work intensity and whether physical discomfort mediated the relationships between these variables. Methods: Structural equation modeling was used with a sample of 253 clinical nurses from four general hospitals. In the model, absolute work intensity, relative work intensity, and flexibility were considered as exogenous variables and physical discomfort as a mediating variable. Data were collected using self-report measures such as the Labor Intensity Questionnaire, the Rating of Perceived Exertion, and the Index of Job Satisfaction. Results: The results of the structural equation modeling found that the higher scores on absolute and relative work intensity were positively associated with physical discomfort but only relative work intensity was significantly related to job satisfaction. Physical discomfort mediated the relationships between absolute work intensity and job satisfaction and between relative work intensity and job satisfaction. Among three kinds of work intensity, only relative work intensity had direct and indirect effects on job satisfaction. Conclusion: The findings suggest that increase in relative work intensity might play an important role in decreasing job satisfaction in clinical nurses and a reasonable reward system considering relative work intensity could be necessary.

• 한국지능시스템학회논문지
• /
• 제24권6호
• /
• pp.615-621
• /
• 2014

중독 문제가 사회문제가 되고 있으며 이를 해결하고자하는 사회적 노력이 계속되고 있다. 이러한 노력 중의 하나로 중독에 대한 수학적 모델링과 이 모델링을 이용하여 거동해석을 수행하며 이 결과를 가지고 중독이전과 중독이후의 상태를 판정하는 연구를 중독 이전의 상태에서 중독 상태로 진행하는 단계의 관찰을 통한 연구를 진행하는 것이 필요하다. 이러한 필요성에 따라 본 연구에서는 운동에 대한 중독 방정식을 전개하기 위하여 Spring-Damper-Mass 시스템과 등가적으로 구성할 수 있는 새로운 2차계로 구성한 운동에 대한 운동 중독 방정식 모델을 제안하고 이 중독 방정식에서의 거동을 분석한다.

• 한국시뮬레이션학회논문지
• /
• 제23권2호
• /
• pp.1-6
• /
• 2014

CPS는 네트워크로 연결된 다수의 임베디드 시스템들이 물리 시스템과 연동하는 새로운 개념의 시스템 이다. 기존의 시스템은 일반적으로 물리 시스템 부분을 고려하지 않았다. 그러나 CPS에서 우리는 물리 시스템에서의 변화와 움직임을 고려해야 한다. 따라서 CPS의 복잡도가 증가로 시스템에서 잠재적인 문제 발생 역시 증가 한다. 본 논문에서 우리는 CPS의 신뢰성을 위하여 실행 가능한 모델 기반 설계 방법론을 적용하고 이를 검증하기 위한 분산 실시간 시뮬레이션 기법을 사용한다. 이산과 연속 요소를 갖는 하이브리드 시스템의 설계를 위하여 우리는 DEV&DESS 형식론을 적용하고 DDS 미들웨어 기반 분산 시뮬레이션 환경에서 시뮬레이션을 수행한다. 또한 우리는 개발한 모델링 도구를 이용한 CPS 응용분야의 모델링 및 시뮬레이션 수행 결과를 보여준다.

• Communications for Statistical Applications and Methods
• /
• 제23권5호
• /
• pp.363-383
• /
• 2016

The Weibull family of lifetime distributions play a fundamental role in reliability engineering and life testing problems. This paper investigates the potential usefulness of transmuted new generalized Weibull (TNGW) distribution for modeling lifetime data. This distribution is an important competitive model that contains twenty-three lifetime distributions as special cases. We can obtain the TNGW distribution using the quadratic rank transmutation map (QRTM) technique. We derive the analytical shapes of the density and hazard functions for graphical illustrations. In addition, we explore some mathematical properties of the TNGW model including expressions for the quantile function, moments, entropies, mean deviation, Bonferroni and Lorenz curves and the moments of order statistics. The method of maximum likelihood is used to estimate the model parameters. Finally the applicability of the TNGW model is presented using nicotine in cigarettes data for illustration.

• 제어로봇시스템학회논문지
• /
• 제10권11호
• /
• pp.1012-1016
• /
• 2004

In the present paper, equivalent beam and equivalent bimorph beam models for IPMC(ionic Polymer-Metal Composite) actuators are described. Physical properties of an IPMC, such as Young's modulus and electro-mechanical coupling coefficient. are determined from the rule of mixture, bimorph beam equations, and measured force-displacement data of a cantilevered IPMC actuator. By using a beam equation with estimated physical properties, actuation displacements of a cantilevered IPMC actuator was calculated and a good agreement between the computed tip displacements and the measured data was observed. Finite element analysis(FEA) combined with the estimated physical properties was used to reproduce the force-displacement relationship of an IPMC actuator. Results from the FEA agreed well with the measure data. The proposed models might be used for modeling of IPMC actuators with complicated shapes and boundary conditions.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.733-738
• /
• 2016

We calculate optical properties of guided modes of a hybrid-guiding photonic crystal fiber. The design and modeling of such hybrid-guiding PCF is made by replacing air holes with inserts of high refractive index material layer by layer in order. The optical properties such as mode intensity profile, mode dispersion, optical birefringence, confinement loss, and chromatic dispersion during transition of the guiding mechanism are analyzed and discussed. The guided modes in the hybrid-guiding region are also compared with those of reference index-guiding and bandgap-guiding photonic crystal fibers.