• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.321-330
• /
• 2011

The physical properties of horticultural substrate are important for optimal plant growth. The physical properties should be properly maintained during the crop growing season for producing higher yield. This experiment was carried out to evaluate the physical properties of different mixtures from various raw materials as horticultural substrates. The mixtures at the different ratios of peatmoss, perlite and vermiculite subjected to 10:0:0, 8:2:0, 6:4:0, 4:6:0, 2:8:0, 0:8:2, 0:10:0, 0:6:4, 0:4:6, 0:2:8, 8:0:2, 0:0:10, 6:0:4, 4:0:6, 2:0:8, 2:6:2, 2:4:4, 4:2:4, 4:4:2, 6:2:2 and 2:2:6 were prepared and analyzed according to two methods of the European Standardization (EN) and Rural Development Administration (RDA). The optimum range of physical properties of a specific horticultural substrate can be predicted using physical-property-triangle. This triangle can also be used to convert a physical property from the EN method to that from the RDA method. Results showed that the mixture at a ratio of > 60% peatmoss, in most cases, is in the range of optimum physical condition for plant growth. We conclude that the developed physical-property-triangle can be suitable to suggest the optimum ratios of horticultural substrates used in this study.

• Clean Technology
• /
• v.19 no.4
• /
• pp.446-452
• /
• 2013

In this paper, the wet mixing method was introduced to prepare spinel lithium manganese oxide (LMO) with $Li_2CO_3$ and $MnCO_3$. The physical properties of the resulting lithium manganese oxide were characterized by the XRD and SEM. The adsorption properties of LMO for $Li^+$ were investigated by batch methods. The maximum adsorption capacity of lithium was calculated from Langmuir isotherm and found to be 27.25 mg/g. The LMO are found to have a remarkable lithium ion-sieve property with distribution coefficients ($K_d$) in the order of $Ca^{2+}$ < $K^+$ < $Na^+$ < $Mg^{2+}$ < $Li^+$, which is promising in the lithium extraction from seawater.

• Composites Research
• /
• v.36 no.6
• /
• pp.408-415
• /
• 2023

The formation of bonding configurations such as pyridinic-N, pyrrolic-N, and graphitic-N by nitrogen doping plays a crucial role in imparting distinct physical properties to carbon nanomaterials. In this study, we propose a simple and cost-effective approach to regulate nitrogen dopant configurations in carbon nanotubes (CNTs) by mixing melamine as a dopant source. We employed three distinct mechanical mixing techniques, namely magnetic stirring, bath sonication and tip sonication. The higher the ratio of melamine to CNT, the higher the ratio of Pyrrolic-N, and when mixed through stirring, the highest ratio of Pyridinic-N was shown. The facile method proposed in this study, which can easily form various types of nitrogen dopants in carbon nanotubes, is expected to facilitate the application of nitrogen-doped carbon nanomaterials.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.6
• /
• pp.83-90
• /
• 2012

Generally, the effect of the cement deep mixing method on the improvement of clay ground is far greater than the effect of physical improvement. Although it leads to great improvement strength in the initial stage, there are not many constructional precedents in Korea and it is hard to manage quality according to the cement-clay mixing method. In order to figure out the strength characteristics according to the mixing ratio of cement, sand, and clay and the improvement characteristics of weak ground according to the forms of the specimens to be improved, marine clay was used in this study to conduct the uniaxial compression test and soil bin model test. The test piece specimens for the uniaxial compression test were mixed with sand in a fixed ratio with the criterion of the water cement ratio. The cement was mixed with clay in the ratios of 10%, 20%, 30%, and 40% to the clay weight. The moisture content of the soil ground was made in the ratios of 40%, 60%, and 80%. The test piece specimens went through curing by moistening for 7, 14, and 28 days and underwent the uniaxial compression test according to the curing period. For the bearing test, the soil bin models were made and the ground improved in the Mat type was formed. After that, the bearing strength was compared in this study according to the improvement ratio and analyzed the intervening effect between the walls of the improved specimens.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.1
• /
• pp.3-10
• /
• 1988

A laboratory study was carried out to investigate the effects of application level of soil amendments, mixing method of soil amendments, and compost treatment on desalinization by examining the changes in hydraulic conductivity and chemical properties of effluent of the soil during desalinization. 1. The treatment of soil amendments brought about the increase in hydraulic conductivity. 2. The higher the application level of a soil amendment, the higher the hydraulic conductivity and the shorter the time elapsed to complete the desalinization. 3. Complete mixing of calcium compounds was more effective for desalinization than surface mixing. 4. The compost treatment induced the rise in pH and therefore brought about the remarkable drop in hydraulic conductivity. 5. During the desalinization, the changes in physical and chemical properties of the soil were influenced by the kind and application level of soil amendments, mixing method of soil amendment, and compost treatment.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2017

Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.329-334
• /
• 2011

In general, butyl rubber(IIR : isobutylene isoprene rubber) has excellent gas permeability resistance and impact absorbance property as low resilience elastomer. In this experiment butyl rubber blends with EPDM(ethylene propylene diene monomer) were prepared by mechanical mixing method. Curing behavior, physical properties and ozone resistance etc. were subsequently examined. Measurement results of gas transmission rate test shows that butyl rubber contents above 50 wt% showed significant decrease in gas permeability resistant property. However, in butyl rubber/EPDM blend, EPDM contents above 25 wt% indicates no surface change due to improvement of ozone resistance under the condition of 50 pphm, $50^{\circ}C$, 120 hrs.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.1
• /
• pp.1-7
• /
• 1989

Coprecipitates of ibuprofen (IPF)-sodium deoxycholate (DC-Na) were prepared at various mixing ratios of IPF to DC-Na. X-ray diffraction measurments indicated that IPF in 1:3 and 1:5 IPF-DC-Na coprecipitate did not exist in the crystal form, however in the 1:8 coprecipitate, IPF remained its crystalline form. The dissolution rate was tested in pH 7.4 phosphate buffer by the paddle method of dissolution test of KP V. The dissolution rates of IPF from 1:1, 1:3, 1:5, 1:8 and 1:10(w/w) IPF-DC-Na coprecipitates and physical mixtures were compared with that of IPF alone. It was found that the dissolution rate of 1:5(w/w) coprecipitate was greater than that of pure IPF, coprecipitate and physical mixture at any other ratios of the two components. The concentration of IPF released from the IPF-DC-Na coprecipitates reached a plateau within 10 min, and thereafter gradually decreased indicating that IPF released from the coprecipitate was recrystallized due to the transient supersaturation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.94-102
• /
• 2014

The physical and chemical properties of recycled fibers from mixed waste paper are more and more deteriorated because of unknown history of recycling times. In order to improve the mechanical properties of liner paper, the recycled fibers from wasted cotton clothes were used in papermaking process, and their applicabilities were evaluated in several points of fiber modification. Thus, two kinds of fiberizing methods from waste cotton clothes were considered by using rotary sandpaper and grinder mill. Finally, the rotary sandpaper method was relatively desirable in preserving longer fiber length and fibrillated fiber surface. The recycled cotton fibers by swelling treatment with NaOH and bleaching with reductive chemicals were mixed with OCC fibers, and the handsheets were prepared to basis weight of $80g/m^2$ and evaluated the mechanical properties of paper. The fibrous properties showed outstanding results in freeness and WRV improvements by alkali treatment and high brightness by reductive bleaching treatment. The physical and mechanical properties of sheet by mixing OCC fibers and recycled cotton fibers were also highly improved in tensile, burst strength and specially folding resistance.

• Journal of the Korean Ceramic Society
• /
• v.55 no.1
• /
• pp.61-66
• /
• 2018

In this study, fabrication method of inorganic insulation were studied to reduce $CO_2$ from buildings. Main materials for inorganic insulation were used cement, blast furnace slag and aluminum powder as foaming agent. Mixing ratio of cement and slag was controlled and physical properties of inorganic insulation were analyzed. When inorganic insulation was fabricated using cement and slag, expanded slurries were not sunken and hardened normally. Pore size was 0.5 - 2 mm; mean pore size was about 1mm in inorganic insulation. Compressive strength of inorganic insulation increased with curing time and increased slightly with cement fineness. However, specific gravity decreased slightly with curing time; this phenomenon was caused by evaporation of adsorptive water. When inorganic insulation was dried at $60^{\circ}C$, compressive strength was higher than that of undried insulation. The highest compressive strength was found with a mixture of cement (50%) and slag (30%) in inorganic insulation. Compressive strength was 0.32 MPa, thermal conductivity was 0.043 W/mK and specific gravity was $0.12g/cm^3$.