• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.81-90
• /
• 2001

A dynamic flood frequency analysis model was proposed for the frequency analysis in ungaged catchment and applied to 6 subbasins in Pyungchang River basin. As the dynamic flood frequency model requires precipitation, rainfall loss system, and runoff analysis, we adopt the rectangular pulse model, the SCS formula, and the geomorphoclimatic IUH(GcIUH) for the application. Input data for the analysis was borrowed from the results of the statistical flood frequency analysis using L-moment method for the same catchment, and then the return period was estimated using the model. This result was also compared with the return period estimated from the statistical analysis. By comparing with the results from two cases, we found the dynamic flood frequency analysis gave higher estimates than those from statistical analysis for the whole subbasins. However, the dynamic flood frequency analysis model has a potential to be used for determining the design flood for small hydraulic structure in ungaged catchment because it uses only physical parameters for flood frequency analysis. And this model can be easily applicable to other watersheds as the scale effect is negligible.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.795-806
• /
• 2016

This study was conducted to improve the continuous techniques for international competitiveness of ginseng industry to Korea-China FTA negotiation and conclusion, and provide the basic information for ginseng industry development of Korea. It was carried out the visiting of the northeastern three provinces (Jilin, Liaoling and Heilongjang) in China for 3-year from 2014 to 2016 and observed the farmers' fields of ginseng cultivation with soil environmental status. The types of ginseng cultivation could be observed in small scales of 0.5~3.0 ha, in middle scales of 4.0~10.0 ha and in large scales of 30~700 ha with the kinds of imhasam, Chinese ginseng, Korean ginseng and western ginseng. Also ginseng was cultivated in newly reclaimed land of forest in two types of direct seeding and transplanting of ginseng seedlings. The field beds of ginseng growing were covered with vinyl films in arch design of 100~130 cm height and vinyl was painted in spraying with blue, green and yellow colours for shading. It was investigated in status of the physico-chemical properties of soils. The physical information on the field soils were silt loam, loam and sandy loam in soil textures, and some plain in low slope, some alluvial fan or local valley in forest of land topography. Soil pH ranged within 5.0~5.2, soil EC was $0.93{\sim}3.78dS\;m^{-1}$, organic matter was $37{\sim}35g\;kg^{-1}$, nitrate nitrogen $63{\sim}490mg\;kg^{-1}$, available $P_2O_5$ $55{\sim}163mg\;kg^{-1}$, and in exchangeable cations, K was 0.30~0.98, Ca was 6.5~14.0, Mg was $1.1{\sim}5.3cmol_c\;kg^{-1}$ in ranges. Farmers used the fertilizer for ginseng cultivation in 10~11 t of compost, $200{\sim}400kg\;ha^{-1}$ of complex fertilizer and $750kg\;ha^{-1}$ of oil cakes. The northeastern three provinces of China can use the newly lands with large areas of ginseng cultivation in soil sickness by continuous cropping. and the soil basic fertility is batter than that of Korean in standard guide of ginseng cultivation soil.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.1
• /
• pp.39-67
• /
• 1987

The purpose of this thesis is to suggest objective basic data for the environmental design through the quantitative analysis of the visual quality included in the physical environment of forest landscape. For this, landscape values of forest landscape have been evaluated by using the Iverson method, the images structure of forest landscape's main utilizing space have been analysed by the factor analysis algorithm, degree of visual preferences have been pleasured mainly by questionnaries and SBE method, and finally these thesis can be summarized as fallow LCP with high values of Iverson factors I and IV yield high landscape value. Specifically, Iverson factor IV has been found to play the dominant. For all experimental points, significant seasonal variations in S.D. scale values have been observed. In natural parks, where artificial structures are complementary to the natural landscape, main factors of image are S.D. scales such as the visual sequence, the formal simplicity of structures, the emphasis, the unification of heterogeneous factors and the assimilation. Factors covering the spatial image of natural parks have been found to be the overall evaluation, the individual characteristics, the tidiness, the potentiality, the dignity, the intimacy and the space volume. For all seasons, factors such as the individual characteristics, the dignity, the tidiness, the potentiality, yield high factor scores. As for factors determining the degree of visual preference, variables such as the summit, the skyline, rocks, the water and the degree of natural destruction by artificial structures yield high values for all seasons.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.6
• /
• pp.67-75
• /
• 2011

This study was carried out to investigate the changes in citizen satisfaction with parks and green spaces in Daegu. Three surveys were conducted using the same measurement tools in 1986, 2001, and 2010. Major results are as follows: 1. The overall satisfaction level with parks and green spaces increased remarkably over the last25years. Satisfaction levels with city spaces overall were higher than that of nearby surrounding areas. 2. Diversity of green spaces was the most distinguished indicator in increasing level of satisfaction while the management level of green space facilities showed the lowest improvement. 3. The factor analysis for individual variables for satisfaction resulted in two factors: functions and physical conditions were categorized as one factor, and indicators for the planning of green spaces were the other. Using a regression model, the major variables found for satisfaction were diversity, management level of woods, quantitative level, function of static recreation, and management level of facilities, respectively. 4. Regarding satisfaction level by the type of green spaces, green spaces by streets showed a remarkable increase while green spaces in industrial areas showed the lowest improvement. A factor analysis for each type of green space resulted in 3 factors: green spaces of urban parks, green spaces of urban recreational facilities, and green spaces of each district including residential areas and industrial areas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.4 s.44
• /
• pp.405-416
• /
• 1992

This study was performed to investigate correlation between total body weight loss and local sweat rate and to find out any possible method that can estimate total body weight loss judging from local sweat rate. Twelve adult females were kept at 44 $\pm1^{\circ}C$, 50 ${\pm}5\%$ R.H. (1) Physiological responses such as total body weight loss, local sweat rate, rectal temperature, skin temperature, blood pressure and pulse, (2) micro climate inside garment and (3) subjective sensation were examined. Two types of garment such as long-sleeves with long pants (Type I) and half·sleeves with short pants (Type II) were used to observe the effect of garment types on sweating response. Both clothing weight was equal (132$\pm$3 g/$m^{2}$). The results were as follows: 1. Regardless of the different types, total body weight loss was more interrelated with the sweat rate on forehead than any other parts of the body. Except the forehead, different parts of body with different types of garment influenced on body weight loss quite differently. 2. Total body weight loss was more interrelated with the weight gain of garment than the local sweat rate. 3. Under the environment of 44$\pm1^{\circ}C,\;50{\pm}5\%$R.H., body weight loss during 1 hour of subject clothed and silted was 275.2 g/hr and weight loss per body surface area was 178.9 g/$m^{2}/hr$ Garment types have no influences on total body weight loss. 4. Local sweat rate (mg/7.07 $cm^{2}/hr$) was 208.0,191.0, 133.0, 115.0,81 0, 75.1 and 66.3 on scruff, breast, forehead, forearm, thigh, upper arm, leg respectively No evidence has been found that garment types influenced on local sweat rate (p<0.1). 5. No interrelationships between rectal temperature and total body weight loss, local skin temperature and total body weight loss, and local skin temperature and local sweat rate were found. From this study, some possible method that we can estimate total body' weight loss judging from weight loss of garment. But considering the fact that clothing design factor, the physical characteristics of fabric and environmental factor such as humidity and wind velocity should be concerned in weight loss of garment, it should be studied further whether the total body weight loss can be estimated properly from the weight loss of garment. This experiment suggest that different parts of body with different types of garment can influence on body weight loss quite differently. Therefore, in order to get more precise results, more studies under the diversity of garment types should be done in the near future.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.659-672
• /
• 1997

Thermal response induced from nonlinear temperature distribution in composite box gilder bridges depends on several variables(environmental conditions, physical and material properties, location and orientation of bridge, and cross-section geometry). In this paper, parametric study are conducted in order to find the effects of variations of seasons, location and orientation of bridge, sectional geometry and some material properties on the axial deformation, curvature and stresses in composite box girder bridge. A two-dimensional transient finite element model to conduct this parametric studies is briefly presented. Firstly, the effects of the parameters on the diurnal variation of curvature are considered, and for the time of maximum curvature, on the distribution of temperature and stresses of composite box girder sectional are considered. Finally, some considerations about the influence of the parameters on the daily maximum values of axial deformation, curvature and stresses are carried out. The influence of thermal effect on structures is important as much as the influence of live or dead load in some cases. In the design of steel composite bridges, the thermal stresses calculated on the supposition that the temperature difference between the concrete slab and steel girder is $10^{\circ}C$ and the temperature distributions are uniform in concrete slab and steel girder can be underestimated.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.297-304
• /
• 2015

Recently, the demand for a PRT(Personal Rapid Transit) system based on autonomous navigation is increasing. Accordingly, the applicability investigations of the PRT system on rail tracks or roadways have been widely studied. In the case of unmanned vehicle operations without physical guideways on roadways, to monitor the position of the vehicle in real time is very important for stable, robust and reliable guidance of an autonomous vehicle. The Global Positioning System (GPS) has been commercially used for vehicle positioning. However, it cannot be applied in environments as tunnels or interiors of buildings. The PRT navigation system based on magnetic markers reference sensing that can overcome these environmental restrictions and the vehicle dynamics model for its H/W configuration are presented in this study. In addition, the design of a control S/W dedicated for unmanned operation of a PRT vehicle and its prototype implementation for experimental validation on a pilot network were successfully achieved.

• Korean Journal of Social Welfare Studies
• /
• no.36
• /
• pp.281-299
• /
• 2008

The objective of this study was to examine the association between personal, housing, program, and service characteristics and quality of life among persons with severe mental illness living in supported housing. A cross sectional survey of a random sample of 237 clients residing in supported housing in Philadelphia was used to assess the association between personal and environmental characteristics, and quality of life. Data were collected from structured interviews, administrative data, the 2000 U.S. Census data file and the Philadelphia police crime database. Multiple regression analyses were used to identify personal and environment characteristics that are associated with quality of life. Clients with diagnoses of schizophrenia, those with lower levels of psychiatric symptoms, those with higher levels of physical health status, and those with higher levels of perceived supportiveness with staff had higher levels of quality of life. Findings of this study suggested that clients' clinical characteristics and consumer staff relationships can be important variables for understanding quality of life among supported housing residents. Factors associated with quality of life identified in this study may help service providers design and plan services to promote quality of life and stable independent living in the community of supported housing residents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.74-82
• /
• 2019

The revolution of industry 4.0 is enabling us to build an intelligent connection society called smart cities. The use of renewable energy in particular solar energy is extremely important for modern society due to the growing power demand in smart cities, but its difficult to monitor and manage in each buildings since need to be deploy low energy sensors and information need to be transfer via wireless sensor network (WSN). The Internet of Things (IoT) / low-power wide-area (LPWA) is an emerging WSN technology, to collect and monitor data about environmental and physical electrical / electronics devices conditions in real time. However, providing power to IoT sensor end devices and other public electrical loads such as street lights, etc is an important challenging role because the sensor are usually battery powered and have a limited life time. In this paper, we proposes an efficient solar energy-based power management scheme for smart city based on IoT technology using LoRa wide-area network (LoRaWAN). This approach facilitates to maintain and prevent errors of solar panel based energy systems. The proposed solution maximizing output the power generated from solar panels system to distribute the power to the load and the grid. In this paper, we proved the efficiency of the proposed system with Simulink based system modeling and real-time emulation.