• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.13-20
• /
• 1995

Effects of thermal annealing on the dielectric/piezoelectric properties of $Pb(Zn, Mg)_{1/3}Nb_{2/3}O_3-PbTiO_3$ ceramics (PZMNPT) with Zn/Mg=6/4) were examined across the rhombohedral/tetragonal morphotropic phase boundary (MPB). Both the relative dielectric permittivity ($\varepsilon$r)and the piezoelectric constant($d_33$)/electromechanical coupling constant ($k_p$)were increased by thermal annealing ($800^{\circ}$~$900^{\circ}C$) after sintering at $1150^{\circ}C$ for 1 hr. Based on the dielectric analysis using the series mixing model and the concept of a random distribution of the local Curie points, the observed improvements in the dielectric and piezoelectric properties of PZMN-PT were interpreted in terms of the elimination of PbO-rich amorphous intergranular layers(~1nm) induced by thermal annealing. A concrete evidence of the presence of amorphous grain-boundary layers in the unannealed (as-sintered) specimen was obtained by examining the structure of intergranular region using a TEM.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1303-1309
• /
• 2018

In the present paper, we study the entropy analysis of boundary layer flow over a slender stretching sheet under the action of a non uniform magnetic field that is acting perpendicular to the flow direction. The effects of viscous dissipation and Joule heating are included in the energy equation. Using similarity transformation technique the momentum and thermal boundary layer equations to a system of nonlinear differential equations. Numerical solutions are obtained using the shooting and fourth-order Runge-Kutta method. The expressions for the entropy generation number and Bejan number are also obtained using a suggested similarity transformation. The main objective of this article is to investigate the effects of different governing parameters such as the magnetic parameter ($M^2$), Prandtl number (Pr), Eckert number (Ec), velocity index parameter (m), wall thickness parameter (${\alpha}$), temperature difference parameter (${\Omega}$), entropy generation number (Ns) and Bejan number (Be). All these effects are portrayed graphically and discussed in detail. The analysis reveals that entropy generation reduces with decreasing wall thickness parameter and increasing temperature difference between the stretching sheet and the fluid outside the boundary layer. The viscous and magnetic irreversibilities are dominant in the vicinity of the stretching surface.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2797-2802
• /
• 2007

It has been confirmed that implementation of the no-slip boundary conditions for the lattice-Boltzmann method play an important role in the overall accuracy of the numerical solutions as well as the stability of the solution procedure. We in this paper propose a new algorithm, i.e. the method of the dynamic boundary condition for no-slip boundary condition. The distribution functions on the wall along each of the links across the physical boundary are assumed to be composed of equilibrium and nonequilibrium parts which inherit the idea of Guo's extrapolation method. In the proposed algorithm, we apply a dynamic equation to reflect the computational slip velocity error occurred on the actual wall boundary to the correction; the calculated slip velocity error dynamically corrects the fictitious velocity on the wall nodes which are subsequently employed to the computation of equilibrium distribution functions on the wall nodes. Along with the dynamic selfcorrecting process, the calculation efficiently approaches the steady state. Numerical results show that the dynamic boundary method is featured with high accuracy and simplicity.

• Journal of Mechanical Science and Technology
• /
• 제15권5호
• /
• pp.671-680
• /
• 2001

Boundary condition is one of the major factors to influence the numerical stability and solution accuracy in numerical analysis. One of the most important physical boundary conditions in the flowfield analysis is the wall boundary condition imposed on the body surface. To solve a two-dimensional Euler equation, totally four numerical wall boundary conditions should be prescribed. Two of them are supplied by the flow tangency condition. The other two conditions, therefore, should be prepared additionally in a suitable way. In this paper, four different sets of wall boundary conditions are proposed and then applied to solve high-speed flowfields around a quarter circle geometry. A two-dimensional compressible Euler solver is prepared based on the finite volume method. This solver hires three different upwind schemes; Steger-Warmings flux vector splitting, Roes flux difference splitting, and Lious advection upstream splitting method. It is found that the way to specify the additional numerical wall boundary conditions strongly affects the overall stability and accuracy of the upwind schemes in high-speed flow calculation. The optimal wall boundary conditions should be also chosen very carefully depending on the numerical schemes used to solve the problem.

• 한국실내디자인학회논문집
• /
• 제19권6호
• /
• pp.169-178
• /
• 2010

In this study, the concept of environmental-friendly architecture, where environment is importantly regarded as a design concept in modern architecture and the meaning of boundary are examined, To apply properly design methodologies along with the importance of environment, the concept of environmental-friendly architecture should be first correctly established. And as the recent rapid development of technologies provides new possibilities for environmentally-friendly architecture, it is needed to have a new boundary concept and the interpretation of the meaning of boundary differentiated from the one of existing architecture. Recently the meaning of boundary is expanding its range to the relations with its neighboring environment beyond the relations with in and out of a space and has also the role as a medium for exchange and communication instead of breaking-off. Therefore, the boundary of environmental-friendly architecture alongside physical boundary is extended to the area for communication. Here, a basic boundary of architecture is maintained, but its meaning and expressions get natural shapes. The study deals with the analysis of the concept of environmental-friendly architecture and its changes from the perspective of times, environment and social backgrounds and seeks its appropriateness centered on environmental-friendly architecture Since 1980s when the issues of human and environment were raised in earnest.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.439-442
• /
• 2003

This study presents a new computational model to analyze the grain deformation in a polycrystalline aggregate in a discrete manner and based directly in the underlying physical micro-mechanisms. As a result, specific characteristics have to be considered for the numerical analysis. The grains and grain boundary elements are introduced to model individual grains and grain boundary facets, respectively, to consider the size effects in the micro forming. The constitutive description of the grain elements accounts for the rigid-plastic and the grain boundary elements for elastic relationships. The capability of the proposed approach is demonstrated through application of grain element and grain boundary element in the micro forming.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.253-257
• /
• 2009

Along with emergence of recent issues such as 'minimization of energy consumption' and 'natural environment and human health' amid the flow of requirements for nature-friendly architecture, attempts for boundary, which has a variety of possibilities as the intermediate territory between interior and exterior space of the architecture, have been pursued actively. On the ground of close relationships between urban area and architecture in a modern society, the boundary between interior and exterior is being exhibited in a wide variety of way of expressions, not as a single plane any longer. In line with this, researcher analyzed interior and exterior boundary according to its type targeting modern housing complex in Europe, and also investigated characteristics thereof. And, having provided the results as basic materials in order to seek amenity of local apartment houses and diversification of housing plan as well, the researcher intends to be of a help to bring physical changes in both building and exterior design, and also to give a new meaning in an environment-friendly aspect.

• Journal of the korean society of oceanography
• /
• 제33권4호
• /
• pp.212-218
• /
• 1998

Three different outflow boundary conditions are considered in modeling the East Sea circulation. The first one is that of the conventional constant volume transport (CT). The second one is the Orlanski radiation boundary condition (OR). The third one is that of the constant sea level just outside the outflow boundary (SL). In the third condition, the outflow current is set to be driven by the sea level differences across the outflow open-boundary lines, based on the recent knowledge that the Tsushima Current is driven by the sea level differences across the inflow and outflow boundaries. In case of OR it takes too much time to reach the steady state, resulting in a large increase of Tsushima Current Water in the basin and low level of kinetic energy. Both CT and SL reach the steady state in a relatively short time. However, SL is more recommendable, because it is based on physical background and generates less numerical noises than CT.