• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.359-366
• /
• 2002

To survey satellites using only GPS can sometimes cause an impossible situation due to the many different geographical conditions as city cannon and obstacles. Although the GLONASS satellite system does not have the ability to survey itself accurately since it currently lacks of the number of usable satellites, it is able to bridge the gap when combined with GPS. This research used the GPS receiver to perform four analyzing methods to bring out the independent surveying method of GPS and combined surveying method of GPS and GLONASS(4 methods - number of satellites able to receive, precision of raw data, standard deviation from known point and RTK surveying). The result of test surveying satellites showed that 11 hours were possible to measure a minimum of 4 satellites when using an independent surveying method and 4 hours in unified surveying method in a month. Also, the precision of raw data using GPS and GLONASS surveying is 0.08~l.8m better than the GPS surveying in standard deviation. The deviation of known points by GPS and GLONASS also showed better accuracy by 3~l1mm. The RTK showed the range of differences in deviation of survey by leaning towards the GPS independent survey in Northing coordinate and leaned towards the Easting coordinate when GPS and GLONASS were combined. Nonetheless, it can't be said that the unified method is better, because it has limits to its capability.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2020

Open pit mines for limestone mining require rapid development of technologies and efforts to prevent safety accidents due to rapid deterioration of the slope due to deforestation and rapid changes in the topography. Accurate three-dimensional spatial information on the terrain should be the basis for reducing environmental degradation and safe development of open pit mines. Therefore, this study constructed spatial information about open pit mine using UAV(Unmanned Aerial Vehicle) and analyzed its utility. images and 3D laser scan data were acquired using UAV, and digital surface model, digital elevation model and ortho image were generated through data processing. DSM(Digital Surface Model) and ortho image were constructed using image obtained from UAV. Trees were removed using 3D laser scan data and numerical elevation models were produced. As a result of the accuracy analysis compared with the check points, the accuracy of the digital surface model and the digital elevation model was about 11cm and 8cm, respectively. The use of three-dimensional geospatial information in the mineral resource development field will greatly contribute to effective mine management and prevention of safety accidents.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.1
• /
• pp.35-41
• /
• 2020

3D laser scanners are an effective way to quickly acquire a large amount of data about an object. Recently, it is used in various fields such as surveying, displacement measurement, 3D data generation of objects, construction of indoor spatial information, and BIM(Building Information Model). In order to utilize the point cloud data acquired through the 3D laser scanner, it is necessary to make the data acquired from many stations through a matching process into one data with a unified coordinate system. However, analytical researches on the accuracy of point cloud data according to the registration method are insufficient. In this study, we tried to analyze the accuracy of registration method of point cloud data acquired through 3D laser scanner. The point cloud data of the study area was acquired by 3D laser scanner, the point cloud data was registered by the ICP(Iterative Closest Point) method and the shape registration method through the data processing, and the accuracy was analyzed by comparing with the total station survey results. As a result of the accuracy evaluation, the ICP and the shape registration method showed 0.002m~0.005m and 0.002m~0.009m difference with the total station performance, respectively, and each registration method showed a deviation of less than 0.01m. Each registration method showed less than 0.01m of variation in the experimental results, which satisfies the 1: 1,000 digital accuracy and it is suggested that the registration of point cloud data using ICP and shape matching can be utilized for constructing spatial information. In the future, matching of point cloud data by shape registration method will contribute to productivity improvement by reducing target installation in the process of building spatial information using 3D laser scanner.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2002

This study applied each Neural Networks theory and Fuzzy Set theory to improve accuracy in remotely sensed images. Remotely sensed data have been used to map land cover. The accuracy is dependent on a range of factors related to the data set and methods used. Thus, the accuracy of maps derived from conventional supervised image classification techniques is a function of factors related to the training, allocation, and testing stages of the classification. Conventional image classification techniques assume that all the pixels within the image are pure. That is, that they represent an area of homogeneous cover of a single land-cover class. But, this assumption is often untenable with pixels of mixed land-cover composition abundant in an image. Mixed pixels are a major problem in land-cover mapping applications. For each pixel, the strengths of class membership derived in the classification may be related to its land-cover composition. Fuzzy classification techniques are the concept of a pixel having a degree of membership to all classes is fundamental to fuzzy-sets-based techniques. A major problem with the fuzzy-sets and probabilistic methods is that they are slow and computational demanding. For analyzing large data sets and rapid processing, alterative techniques are required. One particularly attractive approach is the use of artificial neural networks. These are non-parametric techniques which have been shown to generally be capable of classifying data as or more accurately than conventional classifiers. An artificial neural networks, once trained, may classify data extremely rapidly as the classification process may be reduced to the solution of a large number of extremely simple calculations which may be performed in parallel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2002

DEM(Digital Elevation Model) is used widely in image processing, water resources, construction, GIS, landscape architecture, telecommunication, military operations and other related areas. And it is used especially in producing ortho-photo based on specific DEM and developing 3D GIS database vividly. As LiDAR(Light and Detection And Ranging) system emerged recently, DEM could be developed in urban area more efficiently and more economically, compared to the conventional DEM Production. Traditional method using check points for elevation has tome limitations in structure's height accuracy by LiDAR, because it uses only terrain height. Accordingly after the downtown of Chungju city was selected as a test field in this paper and DEM and digital ortho images was produced by way of LiDar survey, the accuracy was evaluated through analytical plotting map. The result shows that in case of buildings in LiDAR DEM, the accuracy is 0.30 m in X, 0.62 m in Y and RMS is 1.17 m. The difference distribution between DEM and plotting map in range of $\pm$10 cm was 36.2% and $\pm$10 cm $\pm$20 cm was 43.53%. The accuracy of LiDAR in this study meets 1/5,000 which is the regulation for map of NGI(National Geography Institute) and LiDAR can be possibly used in many other applied area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.225-232
• /
• 2004

The human history has progressed closely related to land. Mankind started land administration as a tool of governance to make land the object of imposing taxation as well as developing the land administration as a concept of securing property rights. People have drawn boundary lines on the ground to form a land parcel according to the usage and/or ownership. Furthermore, the land administration has been developed as a registering system of cadastral records fer the public announcement of fixed boundary instead of changeable ground boundary. Currently the citizens demand the provision of accurate and diverse information on the land which is assessed to has high property value encouraged by the rapid development in the post-industrial society today. However, even though the fact that the Korean cadastral registers produced during the Land Investigation Project are still practically in use causes land-related disputes and promotes public mistrust because of the changed boundaries by parcel mutation, the expansion and contraction of map sheets and the quality deterioration and damage of map paper, but the ultimate resolution is not yet made so far. The distance difference between boundary points are compared and analyzed using TS surveying method in the research as a methodology to resolve the boundary inconsistency, the current problem of cadastral records. Consequently, I'd say that the new surveying method of registering the coordinates of real ground boundary has been regarded as more efficient than considering the matter on the map regardless of urban or rural areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.253-259
• /
• 2004

The sheetwise cadastral map data needs to become a Serial Cadastral Map (SCM) database for the promotion of the reliability of cadastral surveying, for the efficient operation of the Parcel Based Land Information System, and for the convenient use of land information as well. A large amount of money and time are required for the editing process of producing SCM DB in accordance with the $\ulcorner$Guideline for the Production of Serial Cadastral Maps$\lrcorner$ by the Ministry of Construction & Transportation if any of field surveying techniques is accompanied by. In addition, a boundary line that extends to a neat line does not meet the counterpart of the neighboring map sheet at a point. Such cases frequently occur and are much dependent upon the decisions of individuals in charge of editing or inspecting. The core processes of the research, firstly overlay SCM produced by the edition of the sheetwise cadastral maps with Autodesk Map on orthophoto images, secondly adjust the parcel boundaries which are delineated over more than one map sheet, and lastly compare the original boundary coordinates and areas with the corresponding adjusted ones and calculate root mean square errors (RMSEs). The research aims at promoting the quality of SCM by minimizing the inconsistency of parcel boundaries by means of the comparative analysis of the calculated RMSEs.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.257-266
• /
• 2007

The research on red tide is generally in progress through field work, such as the naked eye and sampling. It was difficult to forecast exactly the course, from appearance of red tide to disappearance. with the established ways of investigation and analysis. Accordingly it is need to analyze environmental factors in time and space, the appearance of red tide and the path of its migration by more objective and scientific methods. In this study, GIS is applied to analyse the space character of red tide and the interpolation of IDW(Inverse Distance Weight) is applied to assume the density distribution of red tide after gather data by using Arc/Info. After IDW interpolation, the sea area occurred over 1,000 cells/ml of red tide density is extracted with CON and SUM Function of Grid Module, and the density of the sea area is accumulated daily. As a result of this study, the distribution condition of red tide is found timely and spacially by applying GIS to the sea area of red tide, the results indicated that the spatial density and the cumulative frequency about the origin of red tide using GIS, the sea area demonstrated that the maximum density and the maximum frequency varied significantly over the Nammyun of Namhae-Is. with the maximum frequency being 49 times. accordingly if data about the areas of red tide will occur from the present are accumulated, the shifting route of red tide occurrence and extinction can be predicted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.639-647
• /
• 2009

In line with the rapid settlement of information society, the demand for geospatial information and its applications are dramatically increasing. The Project of National Geographic Information System(NGIS) is actively on going to meet up-to-dateness and accuracy of geospatial data. It is fact that the public interest in environmental issues is increasing than ever in accordance with the restoration of the four major rivers, core project of Green New Deal Policy, and the event of the Ramsar General Meeting. Because the Nakdong River Estuary is a place of great importance in both aspects of wetland and environment conservation, a variety of researches related to this area are progressing. Although artificial developments and natural phenomena are rapidly changing the topography and ecosystem of this area, the effort to build topographic DB for change monitoring is very slow. This study describes a Lidar surveying project over the restored wetland Eulsukdo, the southermost part of the Nakdong River, to establish precise topographic DB throughout producing 3D topographical maps and wetland classification maps. The results of this study will make a large contribution to the systematic maintenance and management for the restored Eulsukdo wetland.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.213-221
• /
• 2018

South Korea has been reluctant to open its geospatial information overseas to ensure security as a divided country. However, this cannot continue as the domestic and international environments related to geospatial information and the industrial ecosystem of information and communication technologies have been changing dramatically. Within this context, this study aims to analyze the causal relations among relevant variables and how they change and interact with time using a systems thinking process. First, causal maps were created for the domains of national security, map-based convergence service, and corporate competition. Then, the causal maps for each domain were integrated, based on which the points for policy intervention and dominant feedback loops were identified. The analysis results showed that securing the self-sufficiency of domestic geospatial businesses is a key element to determine the whole causal map, and the variable that changes the dominant feedback loop from a vicious circle to a virtuous one is the decision to open geospatial information overseas. In this study, I found the policy leverage that is a policy intervention point that can produce a great effect with little input by building a causal map of the interactions between major variables. This study is significant in that it identified and analyzed the dominant feedback loop as to which causal structure would dominate the system in the long term. The results of this study can be used to discuss not only the impacts of map data overseas opening on the national security and geospatial information industry, but also the interactions in the future when Google or other global companies request to release the geospatial information.