• 제목/요약/키워드: Photochemical Oxidation

검색결과 52건 처리시간 0.017초

전기장 광화학 증착법에 의한 직접패턴 비정질 FeOx 박막의 제조 및 저항변화 특성 (Electric-field Assisted Photochemical Metal Organic Deposition for Forming-less Resistive Switching Device)

  • 김수민;이홍섭
    • 마이크로전자및패키징학회지
    • /
    • 제27권4호
    • /
    • pp.77-81
    • /
    • 2020
  • Resistive RAM (ReRAM)은 전이금속 산화물의 저항변화 특성을 이용하는 차세대 비휘발 메모리로 전이금속산화물 내의 산소공공의 재분포를 통한 저항변화 특성을 이용한다. 따라서 저항변화 특성을 위해 전이금속산화물 내에는 일정량 이상의 산소공공이 요구되며 이를 위해서는 박막 형성 공정에서 산화 수를 조절할 수 있는 공정이 필요하다. 본 연구에서는 직접패턴이 가능한 photochemical metal organic deposition (PMOD) 공정을 사용하여 UV 노출에 의해 photochemical metal organic precursor의 ligand가 분해되는 과정에서 전기장을 인가하여 박막내의 산화 수를 조절하는 실험을 진행하였다. Electric field assisted PMOD (EFAPMOD) 법을 이용하여 FeOx 박막의 산화 수 조절이 가능함을 x-ray photoelectron spectroscopy (XPS) 분석과 I-V 측정을 통하여 확인하였으며, EFAPMOD 공정 중 인가하는 전압의 크기를 조절하여 박막의 산화 수를 조절할 수 있음을 확인하였다. 따라서 EFAPMOD 공정 중 인가전압의 크기를 이용하여 저항변화 특성에 적합한 적정한 산화수를 가지는 금속산화물 박막을 얻고 그 저항변화 특성을 조정할 수 있음을 확인하였다.

도시의 환원 황 화합물의 이산화황으로의 광화학적 변환 (Photochemical Conversions of Reduced Sulfur Compounds to SO2 in Urban Air)

  • 손장호;김기현
    • 한국대기환경학회지
    • /
    • 제20권5호
    • /
    • pp.647-654
    • /
    • 2004
  • This study examines the local oxidation chemistry of reduced sulfur compounds (RSC) in the urban air. The chemical conversion of RSC (such as DMS, $CS_2,\;H_2S,\;DMDS,\;and\;CH_3SH)\;to\;SO_2$ was modeled using a photochemical box model. For our model prediction of the RSC oxidation, measurements were carried out from an urban monitoring station in Seoul (37.6$^{\circ}$N, 127.0$^{\circ}$E), Korea for three separate time periods (Sep. 17~18; Oct 23; and Oct. 27~28, 2003). The results of our measurements indicated that DMS and $H_2S$ were the dominant RSC with their concentrations of 370${\pm}$140 and 110${\pm}$60 pptv, respectively. The conversion of DMDS to $SO_2$ can occur efficiently in comparison to other RSC, but it is not abundant enough to affect their cycles. The overall results of our study indicate that the photochemical conversion of the RSC can contribute ≶ 20% of the observed $SO_2$.

수용액중의 디벤조치오펜의 광화학적 분해반응의 연구 (A Study on the Photodegradative Behavior of the Dibenzothiophene (DBP) in Water System)

  • Kim, Jae-Hyoun
    • Environmental Analysis Health and Toxicology
    • /
    • 제14권3호
    • /
    • pp.121-126
    • /
    • 1999
  • The present paper describes a study of the photochemical kinetics and its oxidation mechanism of DBT. The photolysis of DBT in aqueous solution media have shown to have significant oxidation activities for the photolytic desulfurization of DBT. The oxidation effect was more pronounced in 4 % NaCl solution. A mechanism was proposed that the desulfurization process arise from the substution of sulfur by the hydroxyl radicals in different aqueous medium.

  • PDF

Photosynthetic Responses to Dehydration in Green Pepper(Capsicum annuum L.)Leaves

  • Lee, Hae-Yeon;Jun, Sung-Soo;Hong, Young-Nam
    • Journal of Photoscience
    • /
    • 제5권4호
    • /
    • pp.169-174
    • /
    • 1998
  • Photosynthetic responses to dehydration were examined by the simulataneous measurement of O2 evolution and chlorophyll (Chl) fluorescence in green pepper leaves. Dehydration was induced by immersing the plant roots directly in the Hoagland solution containing varying concentration (2-30%) of polyethylene glycol(PEG-6000) . Water potential of the leaf was decreased time-and concentation -dependently by PEG-treatment. The decrease in water potential of leaf was correlated with the decrease in both the maximal photosynthesis (Pmax) and quantum yield of O2 evolution, but Pmax dropped more rapidly than quantum yield at all water deficit conditions tested. However, Chl fluorescence parameters were not affected much. Dehydration did not change the initial fluorescence (Fo) and maximum photochemical efficiency(Fv/Fm) of photosystem(PS) II. Both the photochemical quenching (qP) and non-photochemical quenching(NPQ) were not changed by dehydration under low PFR(50 $\mu$mols m-2s-1 ). In contrast, under high PFR(270$\mu$mols m-2s-1)qP was slightly decreased while NPQ was greatly increased. The fast induction kinetics of Chl fluroecence showed no change in Chl fluorescence pattern by dehydration at high PFR (640 $\mu$mols m-2s-1 ), but exhibited a significant drop in peak level(Fp)at low PRFR (70$\mu$mols m-2s-1 ). PS I oxidation and reduction kinetics revealed normal reduction but delayed oxidation to P-700+, suggesting no lesionin electron flow from PSII to PSI , but impaired electron transport to NADP+,These results suggest that water stress caused by PEG-treatment results in the reduction of photosynthesis, promarily due to the reducted electron trasport from PSI to NADP+ or hampered subsequent steps involving Calvin Cycle.

  • PDF

Chemistry of persulfates for the oxidation of organic contaminants in water

  • Lee, Changha;Kim, Hak-Hyeon;Park, Noh-Back
    • Membrane and Water Treatment
    • /
    • 제9권6호
    • /
    • pp.405-419
    • /
    • 2018
  • Persulfates (i.e., peroxymonosulfate and peroxydisulfate) are capable of oxidizing a wide range of organic compounds via direct reactions, as well as by indirect reactions by the radical intermediates. In aqueous solution, persulfates undergo self-decomposition, which is accelerated by thermal, photochemical and metal-catalyzed methods, which usually involve the generation of various radical species. The chemistry of persulfates has been studied since the early twentieth century. However, its environmental application has recently gained attention, as persulfates show promise in in situ chemical oxidation (ISCO) for soil and groundwater remediation. Persulfates are known to have both reactivity and persistence in the subsurface, which can provide advantages over other oxidants inclined toward either of the two properties. Besides the ISCO applications, recent studies have shown that the persulfate oxidation also has the potential for wastewater treatment and disinfection. This article reviews the chemistry regarding the hydrolysis, photolysis and catalysis of persulfates and the reactions of persulfates with organic compounds in aqueous solution. This article is intended to provide insight into interpreting the behaviors of the contaminant oxidation by persulfates, as well as developing new persulfate-based oxidation technologies.

Compositional Study of Surface, Film, and Interface of Photoresist-Free Patternable SnO2 Thin Film on Si Substrate Prepared by Photochemical Metal-Organic Deposition

  • Choi, Yong-June;Kang, Kyung-Mun;Park, Hyung-Ho
    • 마이크로전자및패키징학회지
    • /
    • 제21권1호
    • /
    • pp.13-17
    • /
    • 2014
  • The direct-patternable $SnO_2$ thin film was successfully fabricated by photochemical metal-organic deposition. The composition and chemical bonding state of $SnO_2$ thin film were analyzed by using X-ray photoelectron spectroscopy (XPS) from the surface to the interface with Si substrate. XPS depth profiling analysis allowed the determination of the atomic composition in $SnO_2$ film as a function of depth through the evolution of four elements of C 1s, Si 2p, Sn 3d, and O 1s core level peaks. At the top surface, nearly stoichiometric $SnO_2$ composition (O/Sn ratio is 1.92.) was observed due to surface oxidation but deficiency of oxygen was increased to the interface of patterned $SnO_2/Si$ substrate where the O/Sn ratio was about 1.73~1.75 at the films. This O deficient state of the film may act as an n-type semiconductor and allow $SnO_2$ to be applied as a transparent electrode in optoelectronic applications.

UV Laser를 이용한 광화학적 패터닝과 습식에칭에 따른 알칸티올 분자 작용기의 특성 연구 (A Study on the Characteristics of the Functional Groups of the Alkanethiol Molecules in UV Laser Photochemical Patterning and Wet Etching Process)

  • 허갑수;장원석
    • 한국정밀공학회지
    • /
    • 제24권5호
    • /
    • pp.104-109
    • /
    • 2007
  • Photochemical patterning of self-assembled mono layers (SAMs) has been performed by diode pumped solid state (DPSS) 3rd harmonic Nd:$YVO_4$ laser with wavelength of 355 nm. SAMs patternings of parallel lines have subsequently been used either to generate compositional chemical patterns or fabricate microstructures by a wet etching. This paper describes a selective etching process with patterned SAMs of alkanetiolate molecules on the surface of gold. SAMs formed by the adsorption of alkanethiols onto gold substrate employs as very thin photoresists. In this paper, the influence of the interaction between the functional group of SAMs and the etching solution is studied with optimal laser irradiation conditions. The results show that hydrophobic functional groups of SAMs are more effective for selective chemical etching than the hydrophilic ones.

Photo and Electrocatalytic Treatment of Textile Wastewater and Its Comparison

  • Singaravadivel, C.;Vanitha, M.;Balasubramanian, N.
    • Journal of Electrochemical Science and Technology
    • /
    • 제3권1호
    • /
    • pp.44-49
    • /
    • 2012
  • Electrochemical and photochemical techniques have been proved to be effective for the removal of organic pollutants in textile wastewater. The present study deals with degradation of synthetic textile effluents containing reactive dyes and assisting chemicals, using electro oxidation and photo catalytic treatment. The influence of various operating parameters such as dye concentration, current density, supporting electrolyte concentration and lamp intensity on TOC removal has been determined. From the present investigation it has been observed that nearly 70% of TOC removal has been recorded for electrooxidation treatment with current density 5 mA/$dm^2$, supporting electrolyte concentration of 3 g/L and in photocatalytic treatment with 250 V as optimum lamp intensity nearly 67% of TOC removal was observed. The result indicates that electro oxidation treatment is more efficient than photocatalytic treatment for dye degradation.

탄질 유기물과 케로젠의 풍화 : 탄소와 산소의 지화학적 순환 및 환경화학적 반응에 미치는 영향 (Weathering of coal and kerogen : implications on the geochmical carbon and oxygen cycle and the environmental geochemical reactions)

  • 장수범
    • 자원환경지질
    • /
    • 제32권1호
    • /
    • pp.101-111
    • /
    • 1999
  • Sedimentary organic matter, exposed to continental surficial environment, reacts with oxygen supplied from the atmosphee and forms carbon-containing oxidation products. Knowledge of the rate and mechanisms of sedimentary organic matter weathering is important because it is one of the major controls on atmospheric oxygen level through geologic time. Under the abiological conditions, the oxidation rate of coal organic matter by molecular oxygen is enhanced by the increase of oxygen concentration and temperature. At ambient temperature and pressure, aqueous coal oxidation results in the formation of dissolved $CO_2$ dissolved organic carbon and solid oxidation products which are all quantitatively significant reaction products. The effects of pH, ultraviolet light, and microbial activity on the weathering of sedimentary organic matter are poorly contrained. Based on the results of geochmical and environmental studies, it is believed that the photochemical reaction should play an important role in the decomposition and oxidation of sedimentary organic matter removed from the weathering profile. At higher pH conditions, the production rate of DOC can be accelerated due to base catalysis. These high molecular weight oranic matter can react with man-made pollutants such as heavy metal ions via adsorption/desorption or ion exchange reactions. The effect of microbial activity on the oxidative weathering of sedimentary organic matter is poorly understood and remains to be studied.

  • PDF