• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.137-140
• /
• 2000

Synthesis of a new copoly (M4Ch-ChMA), copoly ((4-methacryloyloxy) chalcone-cholestery methacrylate), with chalconyl and cholesterol moiety characteristics for photoalignment materials was investigated. Good thermal stabilities of the synthesized copolymers are confirmed by thermogravimetric analysis (TGA) measurement. The pretilt angles of the nematic liquid crystal (NLC) are reduced as UV exposure time is increased on the copolymer surfaces. A pretilt angle of 81$^{\circ}$in NLC was observed with UV exposure of 3 min on the copolymer-3 surface. The NLCs pretilt angle is attributable to increased chalcone with increasing the UV exposure time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.10
• /
• pp.924-928
• /
• 2005

We synthesized the two types of photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the two types of photopolymer surface can be obtained. The Voltage-transmittance (V-T) curve in the photoaligned TN cell with UV exposure was different from two type. The response time of photoaligned TN cell was measured about 21 ms in two alkyl chain and about 15 ms in four alkyl chain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.369-372
• /
• 2001

We studied the electro-optical (EO) performance in the vertical-alignment (VA) - l/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces. Excellent voltage-transmittance curve in the VA - l/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesterol group of 8% can be achieved. The V-T characteristics in the VA-l/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-l/4$\pi$ cell photoaligned on the photopolymer surface was better than that of the VA-l/4$\pi$ cell rubbingaligned on a polyimide(Pl) surface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.3
• /
• pp.253-257
• /
• 2002

A new photoalignment material PNC, pole norbornene-2,3-dicarboxyolyl cholesterol, was synthesized and the electro-optical (EO) characteristics of the vortical-alignment (VA) liquid crystal display (LCD) photoaligned with UV exposure on the PNC surface were studied. EO characteristics of the photoaligned VA-LCD using a UV filter-less method was better than that of the UV filter method on the PNC surface for short UV exposure time. The response time of the photoaligned VA-LCD on the PNC surface without UV filter on the PNC surface is almost the same compared with the rubbing aligned VA-LCD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.65-69
• /
• 2004

We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below 1$^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1088-1091
• /
• 2003

We have studied liquid crystal orientation on rubbed and photoaligned polymer surfaces. The following topics will be presented; (1) visualization of nonuniformity of rubbing, (2) competition between grooves and photoalignment and (3) alignment process of 5CB evaporated on treated surfaces. Through these topics, the importance of the intermolecular liquid crystalline interaction will be emphasized.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.489-492
• /
• 2003

Photoalignment materials of PGMAcr, poly[3-(acryloyloxy)-2-hydroxypropyl methacrylate] using an acrylate unit photopolymerized by a photo-initiator and PGMA4Ch, poly[3- (4-ehalconyloxy)-2-hydroxypropyl methacrylate] using photodimerization by the chalcone group were synthesized. Also, the liquid crystal (LC) alignment capabilities on the photopolymer layers were studied. A good LC alignment with UV exposure on the PGMAcr surface can be obtained. However, LC alignment defects were observed on the PGMA4Ch surface. The LC alignment capability of the PGMAcr surface by the photoinitiator was better than that of the PGMA4Ch surface by the chalcone group which is a photosensitive moiety.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.575-578
• /
• 2002

In this work, the electrical characteristics of organic thin film transistors with the surface-treated organic gate insulator have been studied. For the surface treatment, the photoalignment technique was used. The field effect mobilities of the devices with PVP gate insulator was improved about ten times as high as those of TFTs without the insulator surface treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.350-353
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photo-crosslinkable polyimide (PI) based polymer and blending photopolymer surfaces were stuided. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyirnide based polymer surface containing biphenyl (BP), decyl (de), and cholesteryl (chol) group, respectively, However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (PI and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1014-1018
• /
• 2003

A photoalignment material of a PGMAcr, poly[3-(acryloyloxy)-2-hydroxypropyl methacrylate] using a photopolymerized the acrylate unit by photo-initiator and a PGMA4Ch, poly[3(4-chalconyloxy)-2-hydroxypropyl methacrylate] using a photodimerization by chalcone group were synthesized. Also, the liquid crystal (LC) aligning capabilities on the photopolymer layers were studied. A good LC alignment with UV exposure on the PGMAcr surface can be obtained. However, the LC alignment defects were observed on the PGMA4Ch surface. The LC aligning capabilities of the PGMAcr surface by photo-initiator were better than that of the PGMA4Ch surface by chalcone group as photosensitive moiety.