• Corrosion Science and Technology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 2013

According to its merits about high curing speed and low emission of volatile organic compounds, UV curable inorganic-organic coating technology has been developed as an alternative for toxic and carcinogenic chromate-based treatments for years. It is consistently observed that ultra-thin films offer excellent corrosion protection as well as paint adhesion to metals. Based on the tetra-ethylorthosilicate(TEOS) and methacryloxypropyl trimethoxysilane(MPTMS), inorganic sol was synthesized and formed hybrid networks with UV curable acrylic monomer, 6-hexanediol diacrylate(HDDA), trimethylolpropane triacrylate(TMPTA), pentaerylthritol triacrylate(PETA). Several methods were used to test their properties such as salt spray test, potentiodynamic measurement, tape peel test, etc. It was shown that anti-corrosive property and stability of storage were affected by the molecular ratios of inorganic and organic compounds. It was not only the stability of storage, but had a excellent anti-corrosive, paint adhesive, and anti-solvent properties in a final molar ratios of 0.6/0.04/0.86/0.005 (TEOS/MPTMS/Acetone/HNO3) and 0.08/0.106/0.081/0.02 (TMPTA/HDDA/PETA/photo initiator).

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.5
• /
• pp.321-327
• /
• 2009

Sunlight, and in particular its UV component, is the major environmental trigger that underlies the major signs of human skin and skin cancer in general. Therefore, this study was carried out to investigate the UV protection effects of R. coreanus. R. coreanus was extracted by ultra high pressure extraction process at 500 MPa and $30^{\circ}C$ for 5 and 15 minutes. The cytotoxicity of the extracts extracted by ultra high pressure process on human dermal fibroblast cell CCD-986sk, human kidney normal cell HEK293, and human lung normal cell HEL299 was measured as 17.5%, 16.5% and 14.0%, respectively in adding $1.0\;mg/m{\ell}$ of the samples, which was much lower than that from conventional water extraction method at $100^{\circ}C$ as 23.2%, 22.5%, 21.2%. The secretion of $NO^-$ from macrophage showed $15.9\;{\mu}M$ on the R. coreanus extract from this process, which was higher than others. Prostaglandin $E_2$ ($PGE_2$) production from UV-induced human skin cells was also greatly decreased down to $510\;pg/m{\ell}$, compared to the control. From the results, we considered that the extracts from R. coreanus could be potent natural materials for skin anti-inflammation agent, and could be used as a potential anti-aging for the photo-damaged skin.

• FLOWER RESEARCH JOURNAL
• /
• v.18 no.4
• /
• pp.303-307
• /
• 2010

A new spray chrysanthemum cultivar 'Snow Bowl' was released by National Institute of Horticultural & Herbal Science(NIHHS), Rural Development Administration (RDA), in 2008. The cross was made in 2005 between '03B1-230', breeding lines of NIHHS and 'Sei-Alps'. Trials were conducted from 2006 to 2008 for the evaluation and selection of this cultivar, including shading cultures in summer and retarding cultures in spring. The natural flowering time of 'Snow Bowl' is late October, but year-round flowering is possible by photo-periodic control. It has single type flowers with white petals. The growth of plant is very vigorous and it is resistant to white rust. The diameter of flower is 6.3cm. Number of flowers per stem and petals per flower are 12 and 31, respectively. Days to flowering under the short day treatment is about 59 and its vase life is 24.1 days in autumn season. 'Snow Bowl' was applied as No. 2009-179 on February 18, 2009 for variety protection and the plant variety protection rights have been registered as No. 3239 on August 3, 2010 at the Korea Seed and Variety Service.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.204-212
• /
• 2021

Background: Identification of radioisotopes for plastic scintillation detectors is challenging because their spectra have poor energy resolutions and lack photo peaks. To overcome this weakness, many researchers have conducted radioisotope identification studies using machine learning algorithms; however, the effect of data normalization on radioisotope identification has not been addressed yet. Furthermore, studies on machine learning-based radioisotope identifiers for plastic scintillation detectors are limited. Materials and Methods: In this study, machine learning-based radioisotope identifiers were implemented, and their performances according to data normalization methods were compared. Eight classes of radioisotopes consisting of combinations of ²²Na, ⁶⁰Co, and ¹³⁷Cs, and the background, were defined. The training set was generated by the random sampling technique based on probabilistic density functions acquired by experiments and simulations, and test set was acquired by experiments. Support vector machine (SVM), artificial neural network (ANN), and convolutional neural network (CNN) were implemented as radioisotope identifiers with six data normalization methods, and trained using the generated training set. Results and Discussion: The implemented identifiers were evaluated by test sets acquired by experiments with and without gain shifts to confirm the robustness of the identifiers against the gain shift effect. Among the three machine learning-based radioisotope identifiers, prediction accuracy followed the order SVM > ANN > CNN, while the training time followed the order SVM > ANN > CNN. Conclusion: The prediction accuracy for the combined test sets was highest with the SVM. The CNN exhibited a minimum variation in prediction accuracy for each class, even though it had the lowest prediction accuracy for the combined test sets among three identifiers. The SVM exhibited the highest prediction accuracy for the combined test sets, and its training time was the shortest among three identifiers.

• Laser Solutions
• /
• v.8 no.3
• /
• pp.11-19
• /
• 2005

In automotive industry, light weight vehicle is one of issues because of the air pollution and the protection of environment. Therefore, automotive manufacturers have tried to adopt light materials such as aluminum alloy to production line. Aluminum welding using laser has some advantages high energy density and high productivity. It is very important to understand weld characteristic according to welding condition in order to determine the possibility of application to car body. In this study, Nd:YAG laser welding of 5182 aluminum alloy with filler wire AA5356 was carried out through experimental design according to wire feed rate, laser power and welding speed. Weld bead shape in terms of cross section photo, bead with, height of reinforcement and penetration depth and mechanical property in terms of tensile strength and formability was investigated. Analysis of variation (ANOVA) was performed to know the effect of weld parameter for weldability, laser power was statistically most significance factor of three variables.

• Biomolecules & Therapeutics
• /
• v.10 no.4
• /
• pp.246-252
• /
• 2002

In recent years, the safety of sunscreens has been challenged based on the reports of their adverse effect on users; dermatitis, allergic contact dermatitis and photo allergic contact dermatitis. The unscientific idea that higher SPF sunsreen is good for health mealeads many users to tend to prefer higher SPF sunscreen. In the toxicological aspect, the need to investigate the safety of sunscreens is steadily increasing. However, there were few studies on the correlation between sun protection factor (SPF) and the safety of sunscreens. The objective of this study was to assess whether there was a correlation between SPF and the safety of sunscreens. We measured in vitro SPF index using homosalate as a standard and examined the toxicity tests such as primary skin irritation tests, ocular irritation test and skin sensitization test. Homosalate (HS), octyl methoxycinnamate (OMC), octyl salicylate (OS), octocrylene (OC) as UVB organic filter and benzophenone-3 (BP3), butyl methoxy dibenzoil methane (BMDM) as UVA organic filter, and titanium dioxide (TD), zinc oxide (ZO) as inorganic filters were used. The skin irritation indexes in rabbits treated with HS, OMC, OS, BP3, and BMDM were significantly increased as SPF indices were increased. Neither ocular irritation in rabbits nor skin sensitization in guinea pigs were increased. It suggests that there might be a good correlation between SPF and the skin irritation indices of organic UV filters and skin irritation might be one of most sensitive index to assess the safety of sunscreens.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.9
• /
• pp.1453-1459
• /
• 2019

Zeaxanthin is an important pigment in the photo-protection mechanism of microalgae. However, zeaxanthin epoxidase, an enzyme involved in the accumulation and conversion of zeaxanthin, has not been extensively studied in microalgae. In this work, we report the expression pattern of zeaxanthin epoxidase in Dunaliella tertiolecta (DtZEP) at different light and diverse salinity conditions. To confirm the responsiveness to light conditions, the ZEP expression pattern was investigated in photoperiodic (16 h of light and 8 h of dark) and continuous (24 h of light and 0 h of dark) light conditions. mRNA expression levels in photoperiodic conditions fluctuated along with the light/dark cycle, whereas those in continuous light remained unchanged. In varying salinity conditions, the highest mRNA and protein levels were detected in cells cultured in 1.5 M NaCl, and ZEP expression levels in cells shifted from 0.6 M NaCl to 1.5 M NaCl increased gradually. These results show that mRNA expression of DtZEP responds rapidly to the light/dark cycle or increased salinity, whereas changes in protein synthesis do not occur within a short period. Taken together, we show that DtZEP gene expression responds rapidly to light irradiation and hyperosmotic stress. In addition, ZEP expression patterns in light or salinity conditions are similar to those of higher plants, even though the habitat of D. tertiolecta is different.

• Journal of Industrial Technology
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2023

TiO₂ is a versatile metal oxide material that is frequently used as a photo-catalyst for organic pollutant oxidation and a functional material for ultraviolet-ray protection. To improve its chemical/physical properties and widen the range of industrial application, it is demanded to control the crystalline feature and morphology precisely by applying advanced nano-synthesis methods. In this study, we prepared TiO₂ nanoparticles using the water-in-oil (W/O) microemulsion method and compared them with the particles synthesized by the conventional precipitation method. Also, we tried to find the optimum conditions for obtaining nano-sized, anatase-rich TiO₂ particles by the W/O microemulsion method. We analyzed the crystalline feature and particle size of the prepared samples using X-ray diffraction (XRD) and Transmission electron microscopy (TEM). In summary, we found the W/O microemulsion is more effective than precipitation in obtaining nano-sized TiO₂. The best result was derived when the microemulsion was formed using AOT surfactant, hydrolysis was performed under basic condition and the sample was calcined at 200℃.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.2
• /
• pp.211-217
• /
• 2017

In the present study, we investigated the protective effect of various grain methanolic extracts against UVB-induced photo-aging in human skin fibroblasts. Various grain methanolic extracts were evaluated for their antioxidant compounds and activities. 2,2-Ddiphenyl-1-picryhydrazyl radical (DPPH) and ABTS 2,2-azino-bris-(3-ethylbenzoth iazoline-6-sulphonic acid) radical cation scavenging activities have been used to measure the relative antioxidant activities of extracts from grains. The content of total polyphenolics in the extracts were evaluated using spectrophotometric methods. Human skin fibroblast (Hs68) cells were pretreated with various grain methanolic extracts ($25{\mu}g/mL$). Skin toxicity was simulated by exposing the cells to UVB ($30mJ/cm^2$) irradiation. In response to the UVB-irradiation, an increased amount of matrix metallo-proteinases (MMPs) release was observed, whereas pretreatment of various grain methanolic extracts significantly inhibited the production of MMP-1 in Hs68 cells. We also found that pretreatment of the extracts significantly decreased UVB-induced reactive oxygen species and significantly increased total collagen content in Hs68 cells. These results provide that grains could be regarded as a potential ingredient in natural cosmetics, used for UVB protection.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

This paper describes the design of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been designed in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3 metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$ and the estimated power dissipation is less than 900 ㎽ with a single 5 V supply.