• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.207-215
• /
• 2012

As one of photo dynamic therapies, the existing LED photo irradiation method with 635 nm continuous wave has most frequently been used for acne treatment, it suffered from a low energy efficiency and generation of a large amount of heat in tissues requiring improvement measures. In this thesis, a LED photo irradiation system for acne treatment has been designed using PWM(Pulse Width Modulation) mode to enhance the energy efficiency and prevent thermal destruction in tissues. System configuration consisting largely of timer module, PWM module, and photo transfer device has been designed with the use of 1 W LED at a wavelength of 660 nm for the photo transfer device to increase skin penetration depth for treatment of acne. Frequency and wave form generated by using PWM control was verified along with confirmation of output energy of 660 nm LED and surface temperatures of tissues, followed by evaluation of stable energy outputs and stability of tissues. The results indicated that whereas power loss was high and thermal destruction in tissues was exhibited when C.W mode was used to obtain the optical energy of 1 W LED at a wavelength of 660 nm for acne treatment, realization of PWM mode allowed lowering of power consumption for LED through pulse width modulation, and no occurrence of thermal destruction in tissues, suggesting that PWM mode is safer and more effective for treatment of acne than C.W mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.160-166
• /
• 2012

We performed the development and performance evaluation of reflective type heart rate measurement system for PAPS. We used chip LED and chip photo TR. for low power driving. The measured PPG signal is preprocessed using high pass filter and low pass filter, and the preprocessed signal is displayed by LabVIEW. Also LabVIEW include the algorithm that extract effective signal and calculate the heart rate. We made sure that it will be able to apply to measurement equipment with high accuracy and repetition from exercising subject using this system and algorithm.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.304-308
• /
• 2008

In this paper, we present measurement method of the amount of used piped water and the communications environment for automatic piped water meter reading. The existing piped water meter reading which is carried out by the human in person by monitoring the amount of use and recording make the problem of an error of the figure and being short of staffed to carry out piped water meter reading. To solve the existing problem in this paper, the amount of used piped water is converted into data type by Photo Interrupt Sensor, and IEEE 802.15.4 Protocol is used to confirm the measurement in remote place.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.14-21
• /
• 2004

This automotive headlight control system is newly proposed that, under my slope degree of the driving mad(flat up-hill, and down-hill) at night driving, the reflecting mirror of the headlight can be automatically controlled for safe driving. At first whether or not any vehicle is driven near is checked by photo sensor. Secondly, using the slope degree of the automotive feedbacked from the tilt sensor, the servo motor with the headlight is controlled to be turned right or down to the suitable angle. The servo motor is appropriately controlled according to road conditions. The proposed headlight control system is designed on the basis of the tested illumination intensity obtained according to any slope degree of roads. Finally, it is confirmed that the test model works very well in the given road conditions and environments.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.45-58
• /
• 1998

Digital photogrammetry is growing today using inexpensive personal confuter and digital image Processing technique instead of expensive analytical plotter in data acquisition from aerial photograph. Ortho photo in replacement of paper map is indispensable in the application of Geo-Spatial Information System and research activities about it are active in the domestic domain. Also the availability of ortho photo is greatly various in existing related fields using topographic map and expected to be used for new technology in near future. For this purpose, design of each module for ortho photo has been carried out with digital map and image. It was shown that the batch program for ortho photo generation developed in this study, could be used effectively as an effective data acquisition method for GSIS.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.89-99
• /
• 2000

The Quality and Accuracy of digital image is important factor for decision of accuracy in digital photogrammetry because all the inside works in digital photogrammetry are based on digital image. But it is still difficult to ensure quality assurance and appication of data because there is no distinct criterion about quality and accuracy of digital image when the works in digital photogrammetry is accomplished. This study presents optimal resolution of aerial photo through error analysis of image coordinate using auto inner orientation in digital photograrnrnetry workstation. In second step, we are valified to optimum resolution of aerial photo image with orientation analysis. Finally, we are established to validity optimal resolution of aerial photo image with production of ortho image and mosaic image using optimal resolution aerial photo image.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2006

Improper disposal of petroleum and spills from underground storage tanks have created large areas with highly toxic contamination of the soil and groundwater. Methyl tert-butyl ether (MTBE) is widely used as a fuel additive because of its advantageous properties of increasing the octane value and reducing carbon monoxide and hydrocarbon exhausts. However, MTBE is categorized as a possible human carcinogen. This research investigated the Modified Photo-Fenton system which is based on the Modified Fenton reaction and UV light irradiation. The Modified Fenton reaction is effective for MTBE degradation near a neutral pH, using the ferric ion complex composed of a ferric ion and environmentally friendly organic chelating agents. This research was intended to treat high concentrations of MTBE; thus, 1,000 mg/L MTBE was chosen. The objectives of this research are to find the optimal reaction conditions and to elucidate the kinetic and mechanism of MTBE degradation by the Modified Photo-Fenton reaction. Based on the results of experiments, citrate was chosen among eight chelating agents as the candidate for the Modified Photo-Fenton reaction because it has a relatively higher final pH and MTBE removal efficiency than the others, and it has a relatively low toxicity and is rapidly biodegradable. MTBE degradation was found to follow pseudo-first-order kinetics. Under the optimum conditions, [$Fe^{3+}$] : [Citrate] = 1 mM: 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, and initial pH 6.0, the 1000 ppm MTBE was degraded by 86.75% within 6 hours and 99.99% within 16 hours. The final pH value was 6.02. The degradation mechanism of MTBE by the Modified Photo-Fenton Reaction included two diverse pathways and tert-butyl formate (TBF) was identified to be the major degradation intermediate. Attributed to the high solubility, stability, and reactivity of the ferric-citrate complexes in the near neutral condition, this Modified Photo-Fenton reaction is a promising treatment process for high concentrations of MTBE under or near a neutral pH.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2003

Practical use is increasing on the aerial ortho image recently, and much researches for geographic information system build that use high resolution satellite image cause this are progressing. Also many researches that use KOMPSAT-1 satellite image of resolution 6.6m are performing in these days, estimation for between aerial photo and satellite image is needed. In this treatise scanned image of aerial photo, using aerial photo resampling image of resolution equal with KOMPSAT-1 image using aerial photo, and KOMPSAT-1 satellite image use for experimental image making each orthoimage, classified feature for estimate. We evaluated to what level that an separation item could be able to estimate in each orthoimage. As result of estimation analysis, In the classified feature in aerial photo orthoimage with aerial photo resampling image orthoimage is about 61%, KOMPSAT-1 satellite image orthoimage is almost 41% could estimated. Through this investigation estimate, KOMPSAT-1 satellite sue to map updating, geographic information og non-approach area and environment inspect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.230-230
• /
• 2013

In amorphous or microcrystalline thin-film silicon solar cells, p-i-n structure is used instead of p/n junction structure as in wafer-based Si solar cells. Hence, these p-i-n structured solar cells inevitably consist of many interfaces and the cell efficiency critically depends on the effective control of these interfaces. In this study, in-situ plasma treatment process of the interfaces was developed to improve the efficiency of a-Si:H solar cell. The p-i-n cell was deposited using a single-chamber VHF-PECVD system, which was driven by a pulsed-RF generator at 80 MHz. In order to solve the cross-contamination problem of p-i layer, high RF power was applied without supplying SiH4 gas after p-layer deposition, which effectively cleaned B contamination inside chamber wall from p-layer deposition. In addition to the p-i interface control, various interface control techniques such as thin layer of TiO2 deposition to prevent H2 plasma reduction of FTO layer, multiple applications of thin i-layer deposition and H2 plasma treatment, H2 plasma treatment of i-layer prior to n-layer deposition, etc. were developed. In order to reduce the reflection at the air-glass interface, anti-reflective SiO2 coating was also adopted. The initial solar cell efficiency over 11% could be achieved for test cell area of 0.2 $cm^2$.

• The Optical Journal
• /
• v.8 no.2 s.42
• /
• pp.69-70
• /
• 1996