• E2M - 전기 전자와 첨단 소재
• /
• 제7권5호
• /
• pp.409-416
• /
• 1994

A double layered photoreceptor using phthalocyanine dye was made by dip-coating method. The under cutting layer(UCL) was coated with A1$\_$2/O$\_$3/ or polyamide, and the charge generation layer(CGL) was formed by .tau.-type metal-free phthalocyanine. The oxadiazole was used as a charge transport layer(CTL) and polycarbonate and poly(vinyl butyral) was employed as a host polymer. The .tau.-H$\_$2/Pc had an absorption peak around 780nm, which coincided with the emitting wavelengths of GaAlAs diode lasers. Maximum charge acceptance of CTL that gives thickness of 12.mu.m was -900V by corona charge of -6.0kV. In photo-induced discharge measurements, residual potential was less than -20V and sufficient for ordinary use, and sample films using of poly(vinyl butyral) was showed good charge retention. In printing test, drum that was employed polycarbonate as a host polymer showed the good print quality.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.17-24
• /
• 2000

The Joint Photographic Experts Group (JPEG) is a standara still-image compression technique, established by the International for Standardization (ISO) and International Telecommunication Standardization Sector (ITUT). The standard is intended to be utilized in the various kinds of color still imaging systems as a standard color image coding format. Because JPEG is a lossy compression, the decompressed image pixel values are nto the same as values before compression. Image of JPEG compression is often made to JPEG recompression at saving to apply JPEG compression of color image. In general, JPEG is a lossy compression and compression image is predicted to be varied image quality according to recompressed Q-factor. Various distortions of JPEG compression and JPEG recompression has been reported in previous paper. In this paper, we compress four difference color samples (photo image, gradient image, vector drawing image, text image) according to various Q-factor, and then compressed images are recompressed according to various Q-factor once again. As the results, we inspect variation of quality and file size of recompressed color image, and ensure the optimum recompression factor.

• 한국인쇄학회지
• /
• 제29권1호
• /
• pp.23-33
• /
• 2011

This experimental focus to characterize luminescence properties related to CNT (Carbon Nano Tube) element dispersedly implanted in ZnS-based phosphor thin film panel fabricated by a screen printing method. More specifically FE-SEM measurements, L-V(Luminescence vs. Voltage) and photo luminescence were carried out to determine an optimum value of CNT concentration and film thickness for the thin film structure of CNT-ZnS:(Cu, Al) by the screen printing method. We confirmed that an optimum value of CNT concentration in the ZnS:(Cu, Al) film panel is about 0.75 wt% resulting that the electric conductivity is 1.6 times higher than that of pure CNT sample and showing that the luminescence intensity is increasing until the optimum concentration. Clearly, CNT is presenting in the luminescence process providing a pathway for the creation of hot electron and a channel for the electron-hole recombination but overly inserted CNT may hinder to produce the hot electron for making an avalanching process. In case of the overly doped CNT 1.0 wt% in the ZnS-based phosphor, the luminescence intensity is decreasing although the electric conductivity is exponentially increasing. Based on these results, we realized that hot electron occurred by the external electric field or exciton arose by the external photon source are reduced dramatically over the critical value of CNT concentration because CNT element provide various isolated residues in the composites of ZnS based phosphor rather than pathway or channel for the D-A(Donnor to Acceptor) pair transition or the radiative recombination of electron-hole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.154-154
• /
• 2006

글씨 전도성 잉크의 인쇄공정에 있어서 반복인쇄를 정밀하게 수행할 수 있는 기술로서 align system을 개발하였다. 이 system의 resolution 은 0.5um 이며 인쇄 working plate의 이송속도는 최대 1.5m/s 이다. 현재 소성 공정을 포함한 반복인쇄 실험은 30um이상의 drop탄착점 오차를 보이고 있으며, 두께와 전기전도도 향상을 위한 정밀한 align system이 필요하게 되었다. 이를 충족시키기 위해 개발되어진 초정밀 align system은 $1{\sim}2{\mu}m$이내의 오차로 반복인쇄가 가능하며, head가 토출하는 잉크의 straightness 및 전도성 잉크를 토출하는 인쇄평가기의 기계적 정밀도도 확인할 수 있다. 모든 잉크 배선의 두께 항상 인쇄실험이 가능하며, substrate의 종류와 잉크에 제한적이지 않다. 특히 prototype의 기판배선을 위해 PCB에 배선을 형성할 시에 본 system으로 직접 align mark를 지정할 수 있어 기판 내에 미리 제작되어진 align용 인식마크가 불필요하다. 이 system을 이용하여 drop과 배선의 반복인쇄실험을 진행하였으며, 광학현미경과 3D profiler를 사용하여 분석해 보았다.

• 한국의상디자인학회지
• /
• 제8권3호
• /
• pp.35-47
• /
• 2006

This study aims to suggest the Deconstruction theory that is changing and developing by being converted into visual from as cultural code which reflects the spirit of the times and art style as well as to analyze the phenomenon of deconstruction expressed in the Fashion photographs. Fashion photographs are historical documents presenting us with the evidence of the ideal body types and culture throughout time. Fashion photographs is direct information about the fashion itself, and at the same time, it transmits various circumstances of the times. Fashion photographs has opened a new aspect called visual communication, when it's seen in new, more profound way, instead of being locked in its visible frame. Photograph is no longer a mere means to preserve documentation or pursue artistic expression. Instead, it's now regarded as a way to pursue visual transmission owing to its cognitive psychology, and this is a remarkable step toward new thing. In this study, the possible visual information function of photograph was explored from diverse aspects, such as the combination of photo and design, its linking to printing technology's mass production function, or the development of its imagery symbolism. This study shows that the nature of deconstruction can be explained as deconstruction of the sexes, deconstruction of the time and space, and deconstruction of the genre.

• 한국인쇄학회지
• /
• 제13권2호
• /
• pp.47-53
• /
• 1995

Photosensitive resin of azide type is good for resolution and inner solvent, but it is really problem to development of practical use because fanctional groups of polymer has many hydrophilic radicals. By careful attention to this point, this study was investigated synthesis term, photo property and development property of composed photosensitive resin of azida type, it is to this effect. 1) H-NMR spectrum of compared DABCI showed amion redical by $\delta$6.0~6.1ppm to substitude for azide radical by amino radical by $\delta$8.9~9.45ppm, and FT-IR absorption spectra showed the absorption bends at 2100cm. 2)FT-IR absorption spectra of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB showed azida radical pick to be lost at after irradiation by UV light. 3) According to exposuer change of PHS1-DAB, PHS2-DAB, CMM-DAB and CHM-DAB, absorption maximum value of UV spectrum change was 280nm. 4) to compared relative sensitivity of compared photosensitive resin, PHS2-DAB was the best and to compared insolubility rate of compared photosensitive resin, CMM-DAB was the lower. 5)Solubility if NaOH was the best by 1.0mol/$\ell$ and solubility of developing solution of ethanol to water was it in the ratio of 4 to 1.

• 한국재료학회지
• /
• 제16권9호
• /
• pp.550-556
• /
• 2006

Photosensitive carbon nanotube (CNT) pastes are explored to develop a CNT field emitter for field emission display (FED) application. We formulated a photosensitive paste including multi-walled CNTs (MWNTs) for screen printing. The photosensitive CNT paste was synthesized by mixing of MWNTs, inorganic fillers (nano metal), organic vehicle, monomers and photo initiator. The CNT paste films were patterned by using backside exposure technique. The CNTs were strongly fixed on a cathode by formation of carbon residue during firing process. For the CNT emitters, current-voltage(I-V) characteristics and images of field emission were evaluated. The emission properties of CNT emitters are dependent on the paste composition. A turn-on electric field for the CNT field emitters is measured to be 1 V/$\mu$m. Additionally, the effect of heat treatment parameter on field emission properties was discussed. The newly formulated photosensitive CNT paste can be potentially applicable to highly reliable CNT field emitters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1214-1218
• /
• 2006

We introduced simple fabrication process for field emission devices based on carbon nanotubes (CNTs) emitters. Instead of using the ITO material as a transparent electrode, a metal (Au) with thickness of 5-20nm was used. Moreover, the ITO patterning process was eliminated by depositing metal layer, before the CNT printing process. In addition, the thin metal layer on photo resist (PR) layer was used as UV block. We fabricated the CNT field emission arrays of triode structure with simple process. And I-V characteristics of field emission arrays were measured. The maximum current density of $254{\mu}A/cm2$ was achieved when the gate and the anode voltage was kept 150V and 3000V, respectively. The distance between anode and cathode was kept constant.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.100-100
• /
• 2009

$TiO_2$ is widely being used as a semiconductor electrode for DSSC. Anti-recombination property and surface area of $TiO_2$ give an important influence to the DSSC efficiency. In this study, $TiO_2$ electrode was fabricated on FTO using screen printing method. Various overlayers were coated on them by dip coating in solution of saturated $Ba(NO_3)_2$, $Mg(NO_3)_2$ and $N_{2}O_{6}Sr$. They reduced the recombination of electrons from photo excited state of Ru dye. The atmospheric plasma treatment was applied to both the $TiO_2$ and each overlayer coated $TiO_2$ surfaces to improve contact ability with dye. We prepared four samples, one sample has bare $TiO_2$ surfaces to improve contact ability with dye. We prepared four samples, one sample has bare $TiO_2$ electrode and the other samples consist of each overlayer coated $TiO_2$ electrodes. We used XRD, FE-SEM, J-V, IPCE and EIS in order to investigate characteristic.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권4호
• /
• pp.637-642
• /
• 2016

본 연구에서는 TMPTA와 DHPA를 모체로 Ultima $Gold^{TM}$ LLT 유기 섬광체를 혼합하여 자외선에 광중합 특성을 가진 플라스틱 섬광체를 처음으로 제작하고, 그 섬광특성을 조사하였다. 제조된 플라스틱 섬광체의 발광스펙트럼 파장 범위는 380~520 nm이었으며, 중심파장은 423 nm 었다. 400~800 nm의 파장범위에 대하여 50% 이상의 투명도를 나타내었으며, 섬광체의 섬광 감쇠 시간특성이 12 ns인 1개의 성분이 측정되었다. 제작된 플라스틱 섬광체의 발광파장 스펙트럼이 광전자증배관의 양자효율 특성과 잘 매칭되며, 향후 3D 프린팅 소재로서의 최적화 공정 개발을 통해 3D 프린팅 기술에 접목함으로써 인체 도시메트리에 활용하고자 한다.