• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.117-132
• /
• 1994

New methodolgies for the syntheses of unsymmetrical squarylium(SQ) dyes for organic photoconductors(OPC) were developed and photostabilities for these dyes were dicucced. These dyes absorbed at 640-690nm and exhibit high molecular extinction coefficient about 10. photodegradation rate of these dyes is acceralated in the presence if singlet oxygen sensitizer. On the other hand, the photodegradation rate os retarded by adding effective singlet oxygen quencher, such as 2:1 metal dithiolate. It is suggested that the photodegration of unsymmetrical SQ dye may be due to a photo-oxidation involving singlet oxygen.

• Vacuum Magazine
• /
• v.4 no.4
• /
• pp.14-17
• /
• 2017

Recently, quantum-dots light emitting diodes (QLEDs) are considered as a next-generation display due to the superior luminescence behaviors, photo stability and narrow spectral emission bandwidth. Moreover, the emission color of QLEDs can be easily controlled by changing the dimension of quantum dots (QDs). A flexible display based on QLEDs can be achieved using low-cost solution process, such as a printing technology. Therefore, QLEDs are expected as a next generation display. In this document, recent progresses in QDs technology will be introduced.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.63-69
• /
• 2011

In this study, we report on the novel lithographic patterning method to fabricate organic thin film field effect transistors (OTFTs) based on photo and e-beam lithography with well-known silicon technology. The method is applied to fabricate pentacene-based organic field effect transistors. Owing to their solubility, sub-micron sized patterning of P3HT and PEDOT has been well established via micromolding in capillaries and inkjet printing techniques. Since the thermally deposited pentacene cannot be dissolved in solvents, other approach was done to fabricate pentacene FETs with a very short channel length (~30 nm), or in-plane orientation of pentacene molecules by using nanometer-scale periodic groove patterns as an alignment layer for high-performance pentacene devices. Here, we introduce $Al_2O_3$ film grown via atomic layer deposition method onto pentacene as a passivation layer. $Al_2O_3$ passivation layer on OTFTs has some advantages in preventing the penetration of water and oxygen and obtaining the long-term stability of electrical properties. AZ5214 and ma N-2402 were used as a photo and e-beam resist, respectively. A few micrometer sized lithography patterns were transferred by wet and dry etching processes. Finally, we fabricated micron sized pentacene FETs and measured their electrical characteristics.

• Journal of Powder Materials
• /
• v.26 no.4
• /
• pp.327-333
• /
• 2019

In this study, a process is developed for 3D printing with alumina ($Al_2O_3$). First, a photocurable slurry made from nanoparticle $Al_2O_3$ powder is mixed with hexanediol diacrylate binder and phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide photoinitiator. The optimum solid content of $Al_2O_3$ is determined by measuring the rheological properties of the slurry. Then, green bodies of $Al_2O_3$ with different photoinitiator contents and UV exposure times are fabricated with a digital light processing (DLP) 3D printer. The dimensional accuracy of the printed $Al_2O_3$ green bodies and the number of defects are evaluated by carefully measuring the samples and imaging them with a scanning electron microscope. The optimum photoinitiator content and exposure time are 0.5 wt% and 0.8 s, respectively. These results show that $Al_2O_3$ products of various sizes and shapes can be fabricated by DLP 3D printing.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.46-56
• /
• 2014

The aim of this reviews is to introduce the information concerning design of the UV-curable jet ink composition in order to provide a good adhesive property on non-porous surface. In order to clarify the viscosity dependence of flying speed for the UV curable jet ink, rheological analysis and observation of the flying state of the ink were carried out. The relationship between ink formulas and adhesive property on non-porous surface was investigated. It was examined the adhesive property of radical polymerization type UV curable jet ink included hydrogen abstraction type photo-initiator, it was expected that the strong adhesive strength can be obtained between the ink and non-porous surface in this study. UV curable jet ink with a slight amount of water was prepared. Optimum ratio of the cationic polymerization type UV curable jet ink shows an adequate adhesive strength towards two kinds of non-porous surface such as glass, poly(vinyl chloride) when tests were conducted on the ink jet-printing test machine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.866-869
• /
• 2004

A carbon nanotube field emission display(CNT FED) panel with a 2 inch diagonal size was fabricated by using a screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After a surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel was around 390 $^{\circ}C$ and the vacuum level was obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel were characterized Now, we are developing a triode type CNT FED with a self-aligned gate-emitter structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.910-912
• /
• 2006

Barrier ribs in plasma display panels (PDPs) function to maintain the discharge space between the glass plates as well as to prevent optical cross-talking. The barrier ribs currently employed are typically $300{\mu}m$ pitch, $110{\sim}120{\mu}m$ in height, with upper and lower widths of $50{\mu}m$ and $80{\mu}m$, respectively. It has been reported that barrier ribs can be fabricated by screen-printing, sand blasting, etching and photolithographic processes. In this study, photosensitive barrier rib pastes were formulated and systematically evaluated in terms of photolithographic process variables such as printing, drying, UV exposure, development and sintering. It was found that the use of UV absorbent, polymerization inhibitor and surfactant were very effective in controlling the width uniformity of barrier ribs in the photolithographic method of barrier rib patterning.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.484-485
• /
• 2011

반사방지(Anti-Reflection, AR) 특성은 태양전지, LED, 광검출기 등의 광전소자와 디스플레이의 효율과 투과도를 향상시키기 위해 적용되고 있다. 또한 최근에 네비게이션, 스마트폰의 보급 증가로 인해 소형 디스플레이에 지문방지와 동시에 반사방지 기능을 갖는 필름이 사용되고 있다. 현재 적용되고 있는 반사방지 필름은 다층박막 코팅으로 형성된 필름[1]으로 생산단가와 박막의 내구성 및 신뢰성에 문제점을 가지고 있다. 이런 문제점을 해결하기 위해 나노구조로 제작 되는 반사방지 필름에 관한 연구가 활발히 진행되고 있다[2]. 나노구조로 형성된 반사방지 구조는 moth-eye 구조라고 하며, 기본 원리는 원뿔 형태를 형성된 나노 구조를 통해 공기와 나노구조 사이의 유효 굴절률을 서서히 변화시켜 반사를 줄이는 것이다. 그러므로 moth-eye 나노구조는 파장 이하의 pitch와 파장 크기의 높이를 갖도록 구조가 제작되어야 한다[3]. Photo-lithography[4], e-beam lithography[5], interference lithography[6], dip-pen nanolithography[7], hybrid nano-patterning lithography[8] 등 여러 가지 방법으로 나노 구조를 제작하고 있으나, 네비게이션이나 스마트폰 등에 적용될 수 있는 대면적으로 제작하기 위해서는 roll-to-roll printing과 같은 대면적 공정을 이용하여 제작하는 것이 필요하다. 본 논문에서는 원통형 알루미늄 rod에 양극산화를 통해 다공성 AAO(anode aluminium oxide) template를 제작하고, roll-to-roll printing 기술을 사용하여 moth-eye 나노구조를 갖는 반사방지 필름을 제작하는 것에 대해 기술하였다.

• The Research Journal of the Costume Culture
• /
• v.20 no.2
• /
• pp.129-143
• /
• 2012

This study focuses on the application of collage techniques to contemporary fashion and intends to show that collage techniques have a significant influence on contemporary fashion, leading to a more creative design aesthetic through the combination of fashion and art. The author carried out an empirical analysis focusing on domestic and global fashion collections from 2000S/S to 2010F/W, fashion publications, and internet data, along with a literature review. As a result, the papier-colle approach, as represented by cubism, showed a creative surface effect through the texture of the paper itself by applying real paper and other materials directly to the clothing items. Second, Dadaist ready-made expressed a distortion of the material and freedom of expression by creating a collage with ready-made fashion items and daily necessities. Third, a photomontage expressed unique images by printing various images of photos that contrasted in perspective. In addition to this, beauty in dissonance and a new sense of space by a collage of disparate material. Fourth, decalcomanie was expressed by printing methods, giving a stable image of the symmetry of the perfect landscape as well as the unintended effect of coincidence in abstract images and particular textures. Fifth, assemblage as the representative collage technique of pop art introduced the overall object itself or modified form by combining it with fashion to express three-dimensional aggregate structures.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.584-587
• /
• 2011

In this work, the $TiO_2$ and $SnO_2$ thin films as blocking layers were coated directly onto the metal-mesh electrode surface to prevent unnecessary inflow of back-transfer electrons from the electrolyte ($I^-/I_3^-$) to the metal-mesh electrode. The DSCs were fabricated with working electrode of SUS mesh coated with blocking $TiO_2$ and $SnO_2$ layers, dye-attached mesoporous $TiO_2$ film, gel electrolyte and counter electrode of Pt-deposited F:$SnO_2$. From the experimental result, it was ascertained that the efficiency of metal electrode coated with $TiO_2$ by Dip-coating was superior to that of metal electrode coated with $SnO_2$ by Dip-coating and screen printing with the results of experiments. The photo-current conversion efficiency of the cell obtained from optimum fabrication condition was 3% ($V_{oc}$=0.61V, $J_{sc}$=11.64 mA/$cm^2$, ff=0.64) under AM1.5, 100 mW/$cm^2$ illumination.