• 한국인쇄학회지
• /
• 제21권1호
• /
• pp.35-44
• /
• 2003

Because of computer developing, the digital image making the use of many a field of application with - web-above, electronic publishing. printing, dynamic image management and photo CD production etc., however many problems of save and management. The management image use of compression moth which don't have a affect on image, reduce file size. A study used sequential DCT0based mode and progressive DCT-based mode of JPEG(Joing Photographic Experts Group) compression method and Wavelet compression method. Therefore, the analog image and digital image was changed and applied by several stages according to compression rate. It made inquiries of the optimum compression rate that be compared quality transformation between original image and compressed image. As compression image was printing simply, the quality was studied by subjective valuation method, that was studied propriety and usefulness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.33-38
• /
• 2006

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.303-303
• /
• 2007

Photo-imageable thick-film lithography technology was developed for the fabrication of embedded passives such as inductors and capacitors. In this study, photo-imageable dielectric and conductor pastes have apoted a negative type. Sodalime glass wafer, alumina substrate and zero-shrinkage LTCC green tapes were used as substrates. In result, The lithographic patterns were designed as lines and spaces for conductor material, or via-holes for ceramic, LTCC, materials. The scattering and reflection of UV-beam on the substrate had negative effects on fine patterning. The patterning performance was varied with the exposing and developing process conditions, and also varied with the substrate materials. Fine resolution of less then $50/50{\mu}m$ in line and space was obtained, which is difficult in screen printing method.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.710-717
• /
• 2015

Projection stereolithography is an additive manufacturing method that uses beam projection to cure the photo-reactive resin used. The light source of a cross-section layer-form illuminates photo-curable resin for building a three-dimensional (3D) model. This method has high accuracy and a fast molding speed because the processing unit is a face instead of a dot. This study describes a Scalable Projection Stereolithography 3D Printing System for improving the accuracy of the stereolithography. In a conventional projection 3D printer, when printing a small sized model, many pixels are not used in the projection or curing. The proposed system solves this problem through an optical adjustment, and keeps using the original image as possible as filling the whole projection area. The experimental verification shows that the proposed system can maintain the highest level of precision regardless of the output size.

• Journal of Information Display
• /
• 제5권4호
• /
• pp.18-22
• /
• 2004

A carbon nanotube field emission display (CNT FED) panel with a 2 inch diagonal size was fabricated through screen printing of a prepared photo-sensitive CNT paste and vacuum in-line sealing technology. After surface treatment of the patterned CNT, only the carbon nanotube tips are uniformly exposed on the surface. The diameter of the exposed CNTs are usually about 20nm. The sealing temperature of the panel is around 390 $^{\circ}C$ and the vacuum level is obtained with $1.4{\times}10^{-5}$torr at the sealing. The field emission properties of the diode type CNT FED panel are characterized. Currently, we are in the process of developing a triode type CNT FED with a self-aligned gate-emitter structure.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.199-205
• /
• 2017

In this study, (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate acrylate was synthesized by reacting (3,4-epoxycyclohexane)methyl 3,4-epoxycyclohexylcarboxylate with acrylic acid to minimize hardening shrinkage and to improve heat resistance, which are known as disadvantages of photopolymers for 3D printing application. Urethane acrylate was synthesized by reacting 1,3,5-triazine-2,4,6-triamino alcohol, 2-hexylethyl acrylate, and isophorone diisocyanate in order to improve the mechanical properties without deteriorating the heat resistance. The physical properties before and after the synthesis of the acrylate and the mechanical properties when the urethane acrylate was applied were investigated. The reaction progress of the composite was examined by FTIR and $^{13}C$ NMR. The heat deflection temperature, flexural strength, and surface hardness of the molding were measured. The curing behavior by Photo-DSC ultraviolet irradiation was also examined.

• 디지털융복합연구
• /
• 제18권11호
• /
• pp.187-194
• /
• 2020

본 연구는 최근 새로운 제조 수단으로 각광받고 있는 3D프린팅 기술의 통합제어 시스템과 품질개선을 위한 모니터링 SW 기술개발을 위한 프레임워크 및 연구개발 방향을 제시하고자 한다. 이를 위해 본 연구에서는 금속프린팅 기술로 조명되고 있는 DED와 PBF 3D프린팅 기술의 통합 제어기술 개발 Framework와 최근 반도체 장비 등에서 큰 관심을 받고 있는 음향센서를 이용한 모니터링 기술 등 품질 개선을 위한 4가지 모니터링 기술을 제안 소개하고자 한다. 본 연구를 위하여, 국내 3D프린팅 전문기업인 (주)컨셉션, 원광이엔텍(주), (주)디이엔티 등에서 개발 중인 국내 최신 금속 3D프린팅 시스템 장비를 활용하여 연구하였으며(1KW급 Dual Laser PBF 및 DED 프린팅 시스템), 2017년 이래 지속적인 연구개발을 수행해온 경험을 바탕으로 다음세대 3D프린팅 개발자를 위한 연구초안을 제시함으로서 국내 3D프린팅 기술 발전 및 연구개발 협력을 위한 기초자료를 제시하고자 한다.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• 대한전자공학회논문지SP
• /
• 제43권2호
• /
• pp.48-56
• /
• 2006

본 논문에서는 사용자가 원하는 미디어를 제공하기위해 터치스크린과 출력 장치인 디지털 포토 프린터 사이의 색역을 고려하는 자동 컬러 보정 모듈을 가진 디지털 사진 인화 시스템인 디지털 포토 키오스크 시스템을 설계하고 구현하였다. 이 모듈은 디지털 카메라나 카메라폰으로 촬영된 영상에 대하여 고품질의 결과물을 제공할 수 있는 이미지 보정 기능을 수행하는 것이다. 이 기능은 실시간 처리를 위해 LUT(look-up table)로 구현되어 사용자의 원터치 방식으로 동작하는 인터페이스를 제공한다. 따라서 흑백모드, 원톤 색상모드, 밝기 및 채도 조절 등의 이미지 편집 기능으로 사용자의 취향에 맞는 사진을 출력할 수 있고, 입출력 장치간의 자동 컬러 보정 모듈을 지원함으로써 본 시스템은 부드러운 계조표현과 촬영 영상과 유사한 색의 사진을 제공할 수 있다.