• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.387-393
• /
• 2017

A chemical batch tests were conducted to evaluate if microwave heating enhances phosphorous release from waste activated sludge (WAS) at pH 2.5, 5, 7, 9 and 11. Polyphosphate-accumulating organisms have a unique physiological feature, which releases intracellular polyphosphate granules when they are exposed under high temperature environments. Microwave irradiation was found to encourage large amount of phosphorus release from WAS, depending on pH and temperature conditions. Most of phosphorus was released below $59^{\circ}C$ within 30 min. A marked increase in phosphorus release was observed under alkaline or acidic conditions. However, based on control tests for phosphorus release under different pH conditions without microwave heating, the largest amount of phosphorus released by microwave irradiation was found at pH 7, followed by 5, 9, 11. On the other hand, crystallization was conducted to obtain magnesium ammonium phosphate (MAP) from phosphate released by microwave heating at pH 7. X-ray diffraction analysis confirmed that the recovered crystalline materials were MAP. MAP is an environmentally friendly fertilizer, which slowly releases ammonia and phosphorus in response to the demand of plant root. Thus, the recovered MAP as a phosphate fertilizer is fully expected to play a important role in the reduction of agricultural non-point pollution.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.123-130
• /
• 2016

Phosphorus (P) removal by aluminum sulfate solution was investigated with varying pH and initial P concentrations. P removal was the highest at around pH 6. The pH range where P removal occurred was slightly wider at higher initial P concentrations. Compared to theoretical calculations, it was confirmed that $AlPO_4$ precipitation was the main reason for P removal at low pH. At high pH, where there should be no $AlPO_4$ precipitates, the P removal by adsorption of amorphous $Al(OH)_3$ precipitates was experimentally observed. The P removal by adding amorphous $Al(OH)_3$ precipitates prepared before the adsorption experiments, however, was lower than that by injecting aluminum sulfate solution because the prepared precipitates became larger, leading to less specific surface area available for adsorption. Ions other than sulfate had little influence on P removal.

• Journal of Life Science
• /
• v.15 no.4 s.71
• /
• pp.584-589
• /
• 2005

To investigate factors affecting the removal of phosphorus from the practical wastewater in the F-STEP PROCESS using a loess ball and Chromobacterium WS 2-14, first, the loess ball size and calcining temperature, initial pH, initial phosphorus concentration, working temperature, and aeration were studied. A $2\~4mm$ of loess ball made at $960^{\circ}C$ of calcining temperature was the most suitable one for the removal of phosphorus. When the initial pH was increased from 3.0 to 6.0, the removal efficiency of phosphorus was increased. Especially, at 6.0 of initial pH, the maximum removal efficiency of phosphorus was $88.7\%$. The maximum removal efficiency of phosphorous was gained, 1.8mg/h when the initial concentration of phosphorous was 5.0mg/1. When the operating temperature was $30^{\circ}C$, the maximum removal efficiency of phosphorus was obtained. In the case of aeration, when it was increased from 0.5 to 5.0L/min, the removal efficiency of phosphorus was increased. On the other hand, above 7.0 L/min, the removal efficiency of phosphorus did not increased. Using the optimum operation conditions, pilot tests for the effective removal efficiency of phosphorus were carried out for 65 days. The average removal efficiency of phosphorus was $92.0\%$. The average removal efficiency of COD, BOD, and SS were 77.1, 74.2, and $86.4\%$, respectively. from the results, it can be concluded that F-STEP PROCESS using loess ball might be useful process for phosphorus removal.

• Journal of Korean Society on Water Environment
• /
• v.21 no.1
• /
• pp.59-65
• /
• 2005

A phosphate recovery system from artificial wastewater was developed using a completely mixed phosphorus crystallization reactor, in which powdered converter slag was used as a seeding crystal. In preliminary test, the optimal pH range for meta-stable hydroxyapatite crystallization for high phosphorus concentration was observed to be 6.0 to 7.0, which was different from the conventionally known pH range (8.0~9.5) for effective crystallization in relatively low phosphorus concentration less than 5 mg/L. The average phosphorus removal efficiency in a lab-scaled completely mixed crystallization system for artificial wastewater with about 100 mg/L of average $PO_4-P$ concentration was shown to be 60.9% for 40 days of lapsed time. XRD analysis exhibited that crystalline of hydroxyapatite formed on the surface of seed crystal, which was also observed in SEM analysis. In EDS mapping analysis, composition mole ratio (=Ca/P) of the crystalline was found to be 1.78, indicating the crystalline on the surface of seed crystal is likely to be hydroxyapatite. Particle size distribution analysis showed that average size of seed crystal increased from $28{\mu}m$ up to $50{\mu}m$, suggesting that phosphorus recycling from wastewater with high phosphorus concentration can be successfully obtained by using the phosphorus crystallization recovery system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.197-202
• /
• 1999

Three barrows weighing 45.0 kg, fitted with simple T-cannulas in both the duodenum and terminal ileum, were assigned to diets in a $3{\times}3$ Latin Square design experiment to determine the effect of two calcium levels (0.8% vs 0.4%) on phytase activity and nutrient balance in growing pigs. The control diet contained 0.8% calcium, with no added inorganic phosphorus (0.45% total phosphorus) and no added phytase. The two additional experimental diets contained microbial phytase (750 phytase units/kg) and supplied either 0.8% or 0.4% calcium. With added microbial phytase, ileal and total tract digestibility of rotal phosphorus were improved by 20.9 and 13.8 percentage units, respectively (p=0.01). The apparent duodenal and ileal digestibility of phytate phosphorus were increased by 51.8 and 49.7 percentage units (p=0.01). Lowering dietary calcium in the presence of microbial phytase increased the digestibility of phytate phosphorus by an additional 10.9 (p=0.001) and 5.7 percentage units for duodenal and ileal digestibility, respectively. Supplementation with microbial phytase significantly reduced fecal excretion of nitrogen and phosphorus and increased the percentage of these nutrients retained by the pig. Lowering dietary calcium further increased the percentage of dietary phosphorus retained. Overall, reducing dietary calcium appeared to increase the effectiveness of added microbial phytase in degrading phytate phosphorus. As a result, care should be taken to avoid high levels of dietary calcium when supplementing swine diets with microbial phytase.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.431-442
• /
• 2012

The purpose of this study, is to separate magnetic separation devices using permanent magnets by using magnetization characteristics remaining in treated water after adsorption and synthesizing phosphorus adsorbent capable of magnetic separation for efficient removal of phosphorus. The synthesis of the adsorbent which set Zirconium(Zr) having high friendly features for phosphorus as an element, and by synthesizing Iron Oxide($Fe_3O_4$, another name of $Fe_3O_4$ is magnetite) being able to grant magnetism to Zirconium Sulfate($Zr(SO_4)_2$), zirconium magnetic adsorbent(ZM) were manufactured. In order to consider the phosphorus adsorption characteristics of adsorbent ZM, batch adsorption experiment was performed, and based on the results, pH effect, adsorption isotherm, adsorption kinetics, and magnetic separation have been explore. As the experiment result, adsorbent ZM showed a tendency that the adsorption number was decreased rapidly at pH 13; however, it was showed a high amount of phosphorus removal in other range and it showed the highest amount of phosphorus removal in pH 6 of neutral range. In addtion, the Langmuir adsorption isotherm model is matched well, and D-R adsorption isotherm model is ranged 14.43kJ/mol indicating ion exchange mechanism. The result shown adsorption kinetics match well to the Pseudo-second-order kinetic model. The adsorbent ZM's capablility of regenerating NaOH and $H_2SO_4$, was high selectivity on the phosphorus without impacts on the other anions. The results of applying the treated water after adsorption of phosphorus to the magnetic separation device by using permanent magnets, shows that capture of the adsorbent by the magnetization filter was perfect. And they show the possibility of utilization on the phosphorus removal in water.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.1
• /
• pp.64-71
• /
• 1983

This experiment was carried out to investigate the effect of lime and phosphorus on soil and yield of rice plants in acid sulfate soil. 1. Lime requirement plus phosphorus (20Kg/10a) plot showed 60% increased in yield. 2. The effect of increase was 36% in lime and 15% in phosphorus. 3. pH and Eh were reversed each other by lime application, and lime and phosphorus increased soil reduction. 4. Sixty two percent of root was distributed in top soil (0-5cm) of control plot while it spreaed in sub soil (5-10cm) with high level of lime and phosphorus plot. 5. Soil pH reached maximum at maximum tillering stage and decreased there after approching near to original pH. But lime requirement was about half of original one. 6. There was significant positive correlation between yield silica or phosphorus in soil, which were high with increase of pH. 7. The application of lime and phosphorus increased nitrogen content in plants. When contents of phosphorus in rice plants were high the yield of rice was increased.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.187-196
• /
• 1995

Phosphorus and nitrogen loadings from the main tributaries into the Nakdong River were estimated by measuring phosphorus and nitrogen concentration in the main tributaries, Nakdong River(Kangjung), Kumho River, Heichun, Hwang River, Nam River, Milyang River, and Yangsanchun from May 1994 to October. Total Phosphorus concenuation of Kumho River was vary high, average 1.0 mgP/1. The other rivers were the range 0.05 ~0.15 mgP/1. Total nitrogen concentration of Kumho River was vary high, average 6.27 mgN/1. The other rivers were the range 1.5~3.0 mgN/l. The phosphorus loading from Kumho River, Nakdong River(Kangjung), Nam River, Milyang River, Hwang River, Yangsanchun, and Heichun were calculated to be 1, 108, 603, 198, 57, 34, 23, and 21 tP/yr, respectively. Therefore, the loading from Kumho River accounted for 45 "yo of total loading, 2, 042 tP/yr, The nitrogen loading from Nakdong River (Kangjung), Kumho River, Nam River, Milyang River, Hwang River, Heichun, and Yangsanchun were calculated to be 12, 636, 7, 411, 2, 611, 1, 523, 779, 608, and 391 tN/yr, respectively. Therefore, the loading from Nakdong River(Kangiung) and Kumho River accounted for 50 % and 30% of total loading, 25, 959 tN/yr, respectively.vely.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.5
• /
• pp.47-52
• /
• 2010

The purpose of this study is to investigate characteristics of total phosphorus (TP) and phosphate phosphorous ($PO_4$-P) concentrations in ponded water and redox potential (Eh) in paddy soil during the growing season. The TP and $PO_4$-P concentrations showed twice peak values after basal dressing and tillering fertilization. The ratio of $PO_4$-P to TP showed low values (0.07~0.18), indicating that most of phosphorus is particlulate. The $PO_4$-P concentrations significantly decreased with dissolved oxygen (DO) concentrations. The Eh showed high values (179~636 mV) under non-ponded aerobic condition, but low values (74~112 mV) under ponded anaerobic condition The TP and $PO_4$-P concentrations in ponded water increased shortly after tillering fertilization even if phosphorus was not applied. This may be due to the release of dissolved phosphorus from the bottom sediment and its associated algal and water flea blooms under anaerobic condition. Therefore, proper water management should be needed shortly after tillering fertilization.

• Journal of Powder Materials
• /
• v.27 no.1
• /
• pp.31-36
• /
• 2020

Phosphorus is an element that plays many important roles in powder metallurgy as an alloy element. The purpose of this study is to investigate the influence of phosphorus addition on the microstructures and mechanical properties of sintered low-alloy steel. The sintered low-alloy steels Fe-0.6%C-3.89%Ni-1.95%Cu-1.40%Mo-xP (x=0, 0.05, 0.10, 0.15, 0.20%) were manufactured by compacting at 700 MPa, sintering in H₂-N₂ at 1260 ℃, rapid cooling, and low-temperature tempering in Ar at 160 ℃. The microstructure, pore, density, hardness, and transverse rupture strength (TRS) of the sintered low-alloy steels were evaluated. The hardness increased as the phosphorus content increased, whereas the density and TRS showed maximum values when the content of P was 0.05%. Based on microstructure observation, the phase of the microstructure changed from bainite to martensite as the content of phosphorus is increased. Hence, the most appropriate addition of phosphorus in this study was 0.05%.