• Bulletin of the Korean Chemical Society
• /
• v.22 no.4
• /
• pp.351-352
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1936-1938
• /
• 2011

Phosphonium montmorillonites (P-MMTs) were prepared by intercalating dodecyl tributyl phosphonium salt into sodium montmorillonite (Na-MMT) through an ion-exchange method. Microstructure and antibacterial activity of phosphonium montmorillonites were studied by FT-IR, TGA, XRD and Minimum Inhibitory Concentration (MIC), respectively. The results show that phosphonium montmorillonites exhibit higher thermal stability than conventional ammonium montmorillonites, the onset temperature of decomposition is higher than 300 $^{\circ}C$, and the basal spacing of phosphonium montmorillonites is enlarged compared to that of sodium montmorillonite. Phosphonium montmorillonites also show good antibacterial activity with the MIC against E. coli and S. aureus of 150 and 50 $mg{\cdot}L^{-1}$, respectively.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.322-327
• /
• 2003

Two kinds of mutually cross-linkable copolymers were prepared to be used as humidity-sensing materials. The humidity-sensitive thin films consist of cross-linked polyelectrolytes of the following component: 4-vinylbenzyl dimethyl 2-(dimethylphosphino)ethyl phosphonium chloride (1)/ bis(2-methoxyethyl)itaconate (2)= 3/l, 2/l, 1/1 and 1/2 and 4-vinylbenzyl chloride (3)/ vinylbenzyl tributyl phosphonium chloride (4)= 3/l, 2/l, 1/1 and 1/2. The humidity sensor prepared from the reaction of 1/2= 2/l with 3/4= 2/l showed an average resistance of 723,36.2 and 2.42 ㏀ at 30, 60 and 90%RH, respectively. Temperature dependence, frequency dependence, and response time were measured and the reliability test such as water durability and long-term stability were also estimated.

• Macromolecular Research
• /
• v.17 no.4
• /
• pp.221-226
• /
• 2009

The present study firstly describes the synthesis of novel, thermo-latent initiators based on xanthenyl phosphonium salts with different counter anions and phosphine moieties and secondly examines their efficiency in the bulk polymerization of glycidyl phenyl ether(GPE). The polymerization was performed with phosphonium salt initiators($I_{SbF6}$, $I_{PF6}$, $I_{AsF6}$ and $I_{BF4}$) at ambient temperature to $200^{\circ}C$ for 1 h. The order of initiator activity was $I_{SbF6}>I_{PF6}>I_{AsF6}>I_{BF4}$. To examine the effect of the phosphine moiety on the initiator activity, polymerization was carried out with $I_{SbF6}(Ph_{3}P)$ and $II_{SbF6}(Bu_{3}P)$ at ambient temperature to $170^{\circ}C$ for 1 h. The order of reactivity was $I_{SbF6}>II_{SbF6}$. In general, the conversion percentage increased with increasing polymerization temperature. The thermal stability of these salts was measured by thermo gravimetric analysis(TGA). The solubility of phosphonium salts in various organic solvents and epoxy monomers was also investigated.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.392-395
• /
• 2003

Phosrhonium salt exchanged montmorillonites were prepared from a reaction between alkyl triphenyl phosponium bromide and Na$^{＋}$-montmorillonite. Epoxy-clay nanocomposites were also prepared by using cycloaliphtic epoxy, methyl tetrahydrophthalic anhydride as a hardener, and triphenyl butyl phosphonium bromide as an accelerator. TEM and XRD results suggested that clay minerals in the epoxy-montmorillonites composite were intercalated. Mechanical properties such as tensile modulus and strength were measured and the effect of nanocomposite formation was also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2286-2290
• /
• 2013

Ring opening reactions of epoxides with oxygen nucleophiles catalyzed by a variety of quaternary onium salt, such as ammonium or phosphonium salt were explored. The results showed that tetrabutylphosphonium bromide (TBPB) among salts serves as the most efficient catalyst for this process and that expoxide ring opening reactions with a variety of oxygen nucleophiles including carboxyic acid and phenol, promoted using this salt, lead to generate readily purifiable products in excellent yields.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.133-138
• /
• 2013

An efficient synthesis of phospha-Morita-Baylis-Hillman adducts was carried out in good yields via the Michaelis-Arbuzov reaction of the DABCO salts of MBH bromides. Instead of a DABCO salt, a phosphonium salt could be effectively used for some substrates which showed some problems in the presence of DABCO.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.6
• /
• pp.561-565
• /
• 2007

Purpose: Lipophilic cations including tetraphenylphosphonium (TPP) salts penetrate the hydrophobic barriers of the plasma and mitochondrial membranes, resulting in accumulation in mitochondria in response to the negative inner transmembrane potentials. The development of radiolabeled phosphonium cations as a noninvasive imaging agent may serve as a new molecular "voltage sensor" probe to investigate the role of mitochondria in the pathophysiology and diagnosis of cancer. Materials and Methods: We have synthesized a reference compound (4-fluorophenyl)triphenylphosphonium (TPP) and a labeled compound $[^{18}F]$TPP via two step nucleophilic substitution of no-carrier-added $[^{18}F]$fluoride with the precursor, 4-iodophenyltrimethylammonium iodide, in the presence of Kryptofix-2.2.2 and $K_2CO_3$. Result: The reference compound (4-fluorophenyl)triphenylphosphonium (TPP) was synthesized in 60% yield. The radiolabeled compound $[^{18}F]$TPP was synthesized in $10\sim15%$ yield. The radiochemical purity of the $[^{18}F]$TPP was $95.57{\pm}0.51%$ (n=11). Conclusion: $[^{18}F]$TPP was successfully synthesized that might have a potential to be utilized as a novel myocardial or cancer imaging agent for PET. However, it is required to improve the radiochemical yield to apply $[^{18}F]$TPP in preclinical or clinical researches.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.4
• /
• pp.98-107
• /
• 1995

천연물 중 casbene-type diterpenoid의 하나인 crotonitenone의 합성이 시도되었다. 합성 방법으로는 crotonitenone의 각 부분을 먼저 합성하여 이들을 합하는 방법(convergent method)을 적용하였으며, 각 부분이 최종물질에 적합한 sterochemistry를 갖게 하기 위하여 시작물질로는 chiron으로 S-(-)-citronellol과 IS-chrysanthemic acid를 사용하였다. 환구조를 형성하는데 중요한 역할을 할 TBDMS protecting group이 붙은 phosphonium salt(synthon A) 가 고압반응으로부터 고수율 (70%)로 생성되었다. 또한, 중요한 반응으로서 synthon A와 hydroxy lactone(synthon B)과의 Witting reaction이 성공적으로 이루어졌다. 그러나, TBDMS protecting group의 존재하에 이중 치환된 이중결합(disubstituted double bond)과 삼중치환된 것과의 선택적인 환원의 어려움으로 인하여 최종 물질의 합성방법이 재고되었으며 이에 대해 간단히 논하였다.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.411-415
• /
• 1996

A series of aminothiazolylcephalosporin derivatives (1a-1c) having pyridinylethenyl group at C-3 position was prepared starting from phosphonium salt 3 and 2-, 3- or 4-pyridinecarboxal-dehyde and the antibacterial activity of these compounds was investigated. Among them, 4-pyridinylethenyl derivative was more active than 2- and 3-pyridinylethenyl derivativees against Staphylococcus aureus and Escherichia coli.