• 제목/요약/키워드: Phosphonate

검색결과 70건 처리시간 0.029초

Impacts of Phosphorus on Lignification and Carbohydrate Metabolism in Relation to Drought Stress Tolerance in Kentucky Bluegrass (Poa pratensis L.)

  • Kim, Dae-Hyun;Lee, Bok-Rye;Park, Sang-Hyun;Kim, Tae-Hwan
    • 한국초지조사료학회지
    • /
    • 제42권2호
    • /
    • pp.120-126
    • /
    • 2022
  • The objective of this study was to determine effects of phosphorus on lignification and carbohydrate metabolism in Kentucky bluegrass under drought stress. Drought stress was induced by reducing of water to plants in pots. Two types of phosphorus were applied as potassium phosphate (PO43-; P) or potassium phosphonate (PO33-; PA) in drought-stressed plants. Drought had significant negative effects on plant growth, as revealed by reduced biomass of shoot. Drought-induced increase of lignin content was concomitant with the increase of phenylalanine ammonia-lyase (PAL). Soluble sugar content was highly increased but fructan content was largely decreased by drought stress. However, the application of phosphorus was efficient to ameliorate the adverse effects of drought. PA application improved reduced shoot growth and relative water content, and inhibited lignification synthesis with a reduction of PAL activity. P or PA application maintained soluble sugar and fructan content at similar levels to controls under drought stress. These results indicate that phosphorus application may mitigate the drought stress by inhibiting the lignification and promoting the fructan assimilation.

ZrO2 첨가된 SnO2를 이용한 신경 및 수포작용제 검지에 대한 연구 (Sensing Properties of ZrO2-added SnO2 for Nerve and Blister Agent)

  • 윤기열;차건영;최낙진;이덕동;김재창;허증수
    • 센서학회지
    • /
    • 제13권5호
    • /
    • pp.323-328
    • /
    • 2004
  • N-type semi-conducting oxides such as $SnO_{2}$, ZnO, and $ZrO_{2}$ have been known for the detecting materials of inflammable or toxic gases. Of those materials, $SnO_{2}$-based sensors are well known as high sensitive materials to detect toxic gases. And the sensitivity is improved if catalysts are added. Detecting toxic gases, especially DMMP (di-methyl-methyl-phosphonate) and DPGME (Dipropylene glycol methyl ether), was performed by a mixture of Tin oxide ($SnO_{2}$) and Zirconia ($ZrO_{2}$). The films consist of each three different mass% of Zr (from 1 mass% to 5 mass%), and they were tested by XRD, SEM, TEM, BET. Nano-structure, pore and particle size was controlled to verify the sensor's sensing mechanism. The sensors was evaluated at five different degrees (from $200^{\circ}C$ to $400^{\circ}C$) and three different concentrations (from 500 ppb to 1500 ppb). The sensors had good sensitivity of both simulants, and high selectivity of DMMP.

산화주석을 기반으로 한 DMMP 후막가스센서 제작 (fabrication of DMMP Thick Film Gas Sensor Based on SnO2)

  • 최낙진;반태현;곽준혁;백원우;김재창;허증수;이덕동
    • 한국전기전자재료학회논문지
    • /
    • 제16권12S호
    • /
    • pp.1217-1223
    • /
    • 2003
  • Nerve gas sensor based on tin oxide was fabricated and its characteristics were examined. Target gas is dimethyl methyl phosphonate(C$_3$ $H_{9}$ $O_3$P, DMMP) that is simulant gas of nerve gas. Sensing materials were Sn $O_2$ added a-Al$_2$ $O_3$ with 0∼20wt.% and were physically mixed each material. They were deposited by screen printing method on alumina substrate. The sensor device was consisted of sensing electrode with interdigit(IDT) type in front and a heater in back side. Total size of device was 7${\times}$10${\times}$0.6㎣. Crystallite size & phase identification and morphology of fabricated Sn $O_2$ powders were analyzed by X-ray diffraction and by a scanning electron microscope, respectively. Fabricated sensor was measured as flow type and resistance change of sensing material was monitored as real time using LabVIEW program. The best sensitivity was 75% at adding 4wt.% $\alpha$-Al$_2$ $O_3$, operating temperature 30$0^{\circ}C$ to DMMP 0.5ppm. Response and recovery time were about 1 and 3min., respectively. Repetition measurement was very good with $\pm$3% in full scale.TEX>$\pm$3% in full scale.

WHO 분류 1 등급 EPN, Phosphamidone, Terbufos 유기인계 중독환자의 임상 양상 (Different Clinical Courses for Poisoning with WHO Hazard Class Ia Organophosphates EPN, Phosphamidon, and Terbufos in Humans)

  • 문종구;문정미;이미진;전병조
    • 대한임상독성학회지
    • /
    • 제16권1호
    • /
    • pp.1-8
    • /
    • 2018
  • Purpose: Extremely hazardous pesticides are classified as World Health Organization (WHO) hazard class Ia. However, data describing the clinical course of WHO class Ia OP (organophosphate) poisonings in humans are very scarce. Here, we compare the clinical features of patients who ingested hazard class Ia OPs. Methods: This retrospective observational case study included 75 patients with a history of ingesting ethyl p-nitrophenol thio-benzene phosphonate (EPN), phosphamidon, or terbufos. The patients were divided according to the chemical formulation of the ingested OP. Data regarding mortality and the development of complications were collected and compared among groups. Results: There were no differences in the baseline characteristics and severity scores at presentation between the three groups. No fatalities were observed in the terbufos group. The fatality rates in the EPN and phosphamidon groups were 11.8% and 28.6%, respectively. Patients poisoned with EPN developed respiratory failure later than those poisoned with phosphamidon and also tended to require longer mechanical ventilatory support than phosphamidon patients. The main cause of death was pneumonia in the EPN group and hypotensive shock in the phosphamidon group. Death occurred later in the EPN group than in the phosphamidon group. Conclusion: Even though all three drugs are classified as WHO class Ia OPs (extremely hazardous pesticides), their clinical courses and the related causes of death in humans varied. Their treatment protocols and predicted outcomes should therefore also be different based on the chemical formulation of the OP.

TPM-BiP 청색 형광 재료의 전계발광특성 (Characterization of Blue Organic Light Emitting Diodes using TPM-BiP)

  • 장지근;신상배;안종명;장호정;이학민;공명선;김민영;김준우
    • 반도체디스플레이기술학회지
    • /
    • 제6권2호
    • /
    • pp.11-14
    • /
    • 2007
  • For the fabrication of blue color organic light emitting diodes(OLED) with a high performance, 2-TNATA [4,4',4"-tris (2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB [N,N'-bis (1-naphthyl) -N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by the vacuum thermal evaporation. After then, blue color emission layer was deposited using TPM-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl)phosphonate] and GDI602 as a light emitting organic material. Finally, the two kinds of OLEDs with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al and ITO/2-TNATA/NPB/GDI602/Alq_3/LiF/Al$ were prepared by in-situ deposition. The maximum current density and luminance were found to be about $588\;mA/cm^2\;and\;5239\;cd/m^2$ at 12V for the OLED sample with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al$. Color coordinate of blue OLED was x=0.18, y=0.18 (at llV) and the maximum current efficiency was 2.82 cd/A (at 6V) with the peak emission wavelength of 440 nm.

  • PDF

TMP-BiP 호스트와 DJNBD-1 도펀트를 이용한 청색 OLED의 제작과 특성평가 (Fabrication and Characterization of Blue OLED using TMP-BiP Host and DJNBD-1 Dopant)

  • 장지근;안종명;신상배;장호정;공수철;신현관;공명선;이칠원
    • 반도체디스플레이기술학회지
    • /
    • 제6권2호
    • /
    • pp.19-23
    • /
    • 2007
  • The blue emitting OLEDs using TMP-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl) phosphonate] host and DJNBD-1 dopant have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum thermal evaporation method. Followed by the deposition, blue color emission layer was deposited using TMP-BiP as a host material and DJNBD-1 as a dopant. Finally, small molecule OLEDs with structure of $ITO/2-TNATA/NPB/TMP-BiP:DJNBD-l/Alq_3/LiF/Al$ were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. The effect of dopant into host material of the blue OLEDs was studied. The blue OLEDs with DJNBD-1 dopant showed that the maximum current and luminance were found to be about 34 mA and $8110\;cd/m^2$ at 11 V, respectively. In addition, the color coordinate was x=0.17, y=0.17 in CIE color chart, and the peak emission wavelength was 440 nm. The maximum current efficiency of 2.15 cd/A at 7 V was obtained in this experiment.

  • PDF

전이성 골종양에서 원발병소의 진단 (Diagnostic Strategy of Primary Site in Metastatic Bone Tumor)

  • 신규호;서기원;장준섭
    • 대한골관절종양학회지
    • /
    • 제3권2호
    • /
    • pp.98-104
    • /
    • 1997
  • 추후 관찰이 가능하였던 26례의 환자들이 평균 9개월의 짧은 생존기간을 보이는 것으로 보아 환자들에게 고통을 적게 주고 효과적인 비용의 검사를, 즉 흉부 방사선 사진, 복부 초음파, 흉부 전산화 단층 촬영, 복부-골반 전산화 단층 촬영, 기관지 내시경, 소화기 내시경 등의 순서로 진단적 접근을 시도하는 것이 원발병소를 찾는데 도움이 될 것으로 사료된다.

  • PDF

DMMP 검출용 금속산화물을 첨가한 $SnO_2$ 가스센서 제조 (Fabrication of $SnO_2$ Gas Sensor added by Metal Oxide for DMMP)

  • 최낙진;반태현;곽준혁;백원우;김재창;허증수;이덕동
    • 한국군사과학기술학회지
    • /
    • 제6권3호
    • /
    • pp.54-61
    • /
    • 2003
  • $SnO_2$ gas sensor for the detection DMMP, simulant of nerve gas was fabricated and its characteristics were examined. Sensing materials were $SnO_2$ added by TEX>$\alpha$-$Al_{2}O_{3}$ with 0∼20wt.% and $In_{2}O_{3}$ with 0∼3wt.% and were physically mixed each material. They were deposited by screen printing method on alumina substrate. The sensor was consisted of sensing electrode with interdigit(IDT) type in front and a heater in back side. Its dimension was 7$\times$10$\times$0.6$\textrm{mm}^2$. Crystallite size 8t phase identification, specific surface area and morphology of fabricated $SnO_2$ powders were analyzed by X-ray diffraction(XRD), surface area analyzer(BET) and by a scanning electron microscope(SEM), respectively. Sensor was measured as flow type and sensor resistance change was monitored as real time using LabVIEW program. The best sensitivities were 75% at adding 4wt.% TEX>$\alpha$-$Al_{2}O_{3}$, operating temperature $300^{\circ}C$ and 87% at adding 2wt.% $In_{2}O_{3}$, operating temperature $350^{\circ}C$ to DMMP 0.5ppm. Response and recovery times were about 1 and 3 min., respectively. Repetition measurement was very good with $\pm$3% in full scale. As a result, operating temperature was lower TEX>$\alpha$-$Al_{2}O_{3}$ than $In_{2}O_{3}$, but sensitivity was higher $In_{2}O_{3}$ than $\alpha$-$Al_{2}O_{3}$.

In vivo comparison of Lu-177-labeled phosphonate compounds as potential agents for bone pain palliation in rodents

  • Chang, Young Soo;Lee, Yun-Sang;Kim, Young Ju;Jeong, Jae Min
    • 대한방사성의약품학회지
    • /
    • 제1권1호
    • /
    • pp.53-61
    • /
    • 2015
  • Lutetium-177 ($T_{1/2}=6.71day$) is an adequate radionuclide for therapy, which has both beta emission ($E_{max}=497keV$) for therapeutic effect and gamma emission (113 and 208 keV) for imaging. $^{177}Lu$ labeled ethylenediamine-N,N,N',N'-tetrakis (methylene phosphonic acid) (EDTMP) and 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraaminomethylenephosphonate (DOTMP) have been proposed as radiopharmaceuticals for bone pain palliation. In this study, we compared radiochemistry and biodistribution of $^{177}Lu$-EDTMP and $^{177}Lu$-DOTMP. EDTMP and DOTMP were synthesized, and 1 mg of each was labeled with $^{177}Lu$ at pH 7~8 with high efficiency (>98%). For comparative biodistribution studies, $^{177}Lu$-EDTMP or $^{177}Lu$-DOTMP were injected into ICR-mice through tail vein, and then biodistribution data were obtained as percentages of injected dose per gram of tissue (% ID/g). Urine excretions of both agents in mice were checked for 7 days. Rat images were also obtained after injection of $^{177}Lu$-EDTMP or $^{177}Lu$-DOTMP. $^{177}Lu$-DOTMP (100% at 1 min) showed faster labeling than $^{177}Lu$-EDTMP (100% at 30 min). Both of them were stable at least for 21 days at room temperature. High bone uptakes were found for both $^{177}Lu$-EDTMP and $^{177}Lu$-DOTMP: 38.0 and 34.1% ID/g at 3 hr, respectively; and 33.2 and 18.8% ID/g at 7 day, respectively. Rapid excretions to urine were found for both agents ($^{177}Lu$-EDTMP: 56%, $^{177}Lu$-DOTMP: 63% at 1 day). Other organs showed very low uptakes. Rat images of both $^{177}Lu$-EDTMP and $^{177}Lu$-DOTMP showed high bone uptakes and low soft tissue uptakes. In conclusion, both $^{177}Lu$-EDTMP and $^{177}Lu$-DOTMP showed high potential as bone pain palliation agents. $^{177}Lu$-EDTMP showed higher bone uptake and slower bone clearance in mice than those of $^{177}Lu$-DOTMP.

동해 연안역의 박테리아 생산력과 유기물질의 분해능 (Bacterial Productivity and Degradability of Organic Compounds in the Coastal Area of East Sea)

  • 이기성;고동규;김근호;이영근;최청일;최영길
    • 환경생물
    • /
    • 제17권1호
    • /
    • pp.59-69
    • /
    • 1999
  • 동해 연안역의 부영양화 상태 및 종속영양세균에 의한 유기물질 분해능을 조사하기 위해서 대진, 갈남, 포항, 울산의 4개 지역의 연안역을 대상으로 1994년 7월부터 1995년 4월까지 4회에 걸쳐 종속영양세균군집, 오염의 신호화합물, 세균의 생산력, 종속영양활성도 및 세포외 효소활성도 등을 분석하였다. 중금속내성균의 수는 포항에서 가장 높게 나타났으며, 각종 유기인을 이용하는 세균군집을 조사한 결과 유기인(C-P)화합물이 많이 포함될 것으로 예상되는 산업폐수, 가정하수 및 농업폐수 등이 많이 유입되는 정점에서 이들 유기인 화합물을 분해하고 산화 환원시키는 세균군집이 높게 나타났다. 이들 세균의 출현빈도는 산업폐수, 가정하수 그리고 농업용수의 유입예측지표로 활용될 수 있으리라 생각된다. 세포외 효소활성도는 울산 처용암에서 가장 높았으며 대진에서 가장 낮게 나타났다. 이러한 결과는 종속영양 세균수와 세균의 생산성 등과 정의 상관관계를 나타내었다. Poly-P와 DNA의 경우, 정점별로는 포항이 가장 높았고, 울산, 갈남, 대진 순으로 나타났다. 이는 종속영양세균의 분포양상과 매우 일치하는 것으로 조사되었다. 종속영양 활성도는 정점별, 계절별 변화가 매우 심하였다. 세균의 생산력은 하계에 가장 높고 추계와 동계에 낮았다가 춘계에 다시 높아지는 경향을 나타나 종속영양세균의 계절적 변화양상과 유사한 경향을 보였다. 결과적으로 세균의 군집, poly-P함량, 세균의 생산력, 종속영양활성도 및 세포외 효소활성도 등의 분석자료는 부영양화 상태 및 유기물질의 순환과정을 파악할 수 있는 지표로 이용될 수 있다.

  • PDF