• Korean Journal of Materials Research
• /
• v.34 no.5
• /
• pp.247-253
• /
• 2024

The separation of zirconium and hafnium using tributyl phosphate (TBP)-Dodecane extractants in nitric acid medium was performed. Zirconium oxychloride, used as extraction feed, was obtained from the synthesis of Kalimantan zircon sand concentrate smelted using NaOH. The extraction process was carried out by dissolving chloride-based metals in nitric acid media in the presence of sodium nitrate using TBP-Dodecane as an extractant. Some of the extraction parameters carried out in this study include variations in organic phase and aqueous phase (O/A), variations in contact time, and variations in nitric acid concentration. Extraction was carried out using a mechanical shaker according to the parameter conditions. X-ray fluorescence (XRF) was used for elemental (Zr and Hf) composition analysis of the aqueous solution. The results showed that zirconium was separated from hafnium at optimum conditions with an organic/aqueous ratio of 1:5, contact time of 75 min, and an HNO₃ concentration of 7 M. The resulting separation factor of zirconium and hafnium using TBP-Dodecane was 14.4887.

• Archives of Pharmacal Research
• /
• v.29 no.12
• /
• pp.1179-1186
• /
• 2006

Cross-linked starch microspheres were prepared using different kinds of cross-linking agents. The influence of several parameters on morphology, size, swelling ratio and drug release rate from these microspheres were evaluated. These parameters included cross-linker type, concentration and the duration of cross-linking reaction. Microspheres cross-linked with glutaraldehyde had smooth surface compared with those prepared with epichlorhydrine or formaldehyde. The particle size increased with increasing the cross-linking time and increasing the drug loading. Swelling ratio of the particles was a function of cross-linker type but not the concentration or time of cross-linking. Drug release from starch microspheres was measured in phosphate buffer and also in phosphate buffer containing a-amylase. Results showed that microspheres cross-linked with epichlorhydrine released all their drug content in the first 30 minutes. However, cross-linking of the starch microspheres with glutaraldehyde or formaldehyde decreased drug release rate. SEM and drug release studies showed that cross-linked starch microspheres were susceptible to the enzymatic degradation under the influence of alpha-amylase. Changing the enzyme concentration from 5000 to 10,000 IU/L, increased drug release rate but higher concentration of enzyme (20,000 IU/L) caused no more acceleration.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.377-381
• /
• 2004

Chiral separation of aryalcohols such as 1-phenyl-propanol, 1-phenyl-2-proanol, and 2-phenyl-1-propanol by capillary electrophoresis has been optimized using the overlapping resolution mapping (ORM) scheme. Three critical parameters of the electrophoretic media, i.e. phosphate concentration, sulfated ${\beta}$-cyclodextrin (CD) concentration and pH, were chosen for optimization. The working ranges were initially presumed by 7 preexperiments. Further optimization was carried out by another seven experiments within the narrow working ranges. From the final overlapping resolution mapping all peak pairs, the area of maximum separations were located. Using the conditions of a point in this area, we found that the target compounds were a baseline separated within 30 min. The maximum separation conditions of arylalcohols were a chiral selector concentration of 5.4%, a phosphate concentration of 28 mM, and a pH of 5.0.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.448-452
• /
• 2006

This study was performed to evaluate the long-term teachability of the stabilized hexavalent chromium contaminated soils treated with chromium reducing agent and soluble phosphate. The study shows that $Cr^{6+}$ in the leachate was little detected and the remaining $PO_4-P$ concentration kept below 0.1 mg/L due to the formation of geochemically stable hexavalent chromium phosphate minerals from the reactions of labile soil $Cr^{6+}$ forms with the added soluble phosphate salt and chromium reducing agent. The results provide evidence for the potential use of the immobilization technique for the hexavalent chromium contaminated soil remediation in the near future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.453-457
• /
• 2006

A long-term leaching column experiment was performed to evaluate the teachability of the stabilized lead-contaminated soil using soluble phosphate. The study shows that Pb in the leachate was little detected and the remaining $PO_4-P$ concentration kept below 0.1 mg/L due to the formation of geochemically stable lead phosphate minerals from the reactions of labile soil Pb forms with the added soluble phosphate salt. After the experiment, there was no Pb migration from the top to the bottom of the stabilized soil column. But the Pb concentrations of the 12 soil samples from the control column decreased with the increase of the soil depth.

• Microbiology and Biotechnology Letters
• /
• v.10 no.4
• /
• pp.253-258
• /
• 1982

Lactobacillus casei YIT 9018 was infected with phage J1 and subjected to grow in $Ca^{＋＋}$ -free MRT (spell out) medium under the presence of four different types of phosphates, sodium-metaphosphate,-pyrophos-phate,-dibasic phosphate, and potassium-phosphate. Among the phosphates tested, sodium pyrophosphate showed sufficient inhibition on the lytic activity of the phage at 0.1% level whereas other phosphate needed more than 0.2% for the same effect. When the concentration of sodium pyrophosphate increased to 0.17%, the bacteria could be protected from lysis until the second succeeding transfer.

• Journal of Nutrition and Health
• /
• v.28 no.5
• /
• pp.434-441
• /
• 1995

The model rats with postmenopausal osteoporosis were comparatively observed with regard to the effects of bovine ash and calcium phosphate on calcium metabolism. The modelling design involved the five week-old week-old female SD-strain rats ovariectomized and fed a low-Ca diet(20% casein, 0.06% Ca and 0.38% P) for three weeks. The rats were divided into five groups, one of which was fed the low-Ca diet(basal), and the rest of which were divided into five groups, one of which was fed the low-Ca diet(basal), and the rest of which were fed four kinds of Ca-supplemental diets(20% protein, 1.06% Ca and 0.8% P) for three weeks. The Ca-suplements diets contained two kinds of Ca sources, bovine bone ash(BBA) or calcium phosphate, tribasic [Ca3(PO4)2] and two kinds of protein sources, casein or isolated soy protein(ISP). The model rats of postmenopausal osteoporosis fed basal diet showed a significant decrease in Ca utilization in reference to serum Ca concentration, breaking force of bone, Ca and P contents of bone, and Ca absorption and retention. However, the supply of Ca for three weeks demonstrated the improved utilization of Ca. One step further, BBA was more effective than calcium phosphate in improving Ca utilization in ISP-fed groups. On the other hand, no significant difference was seen in casein-fed groups. It is to conclude that BBA could be more effective in accelerating Ca utilization under vulnerable dietary or physiological conditions such as vegetable protein intake and osteoprosis.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.1
• /
• pp.113-119
• /
• 2009

The feasibility of using cork oak bark for phosphorus removal from wastewater was evaluated in this study. Recently, development of more cost-effective media while maintaining high efficiency in pollutants removal has received concern. Barks have a negative surface charge and, hence, tend to show a high affinity to bind cations, and they need to undergo chemical modification to increase their adsorption capacity of anions. Bark was hydrolyzed by HCl solution and it received modification using an aqueous solution of high molecular weight polyethylenimine(PEI). Surface modification with HCl and PEI resulted in a decrease of specific surface area of the bark from $1.932 m^2/g$ to $1.094 m^2/g$. The adsorption experiments were carried out in batch tests and the data were fitted to the Langmuir isotherm and Freundlich isotherm equations. Phosphate removal rate was higher at the lower solution pH possibly due to the form of phosphate ion in solution. For the initial phosphate concentration of 10 mg/L, maximum adsorption was 20.88 mg P/g at pH 3 and 12.02 mg P/g at pH 5. Mechanism of phosphorus sorption onto the HCl-PEI bark was examined through FT-IR spectrometer. Ion exchange between $NH^+$ and $H_2PO_4{^-}$ appeared to be a key mechanism of phosphate adsorption onto the HCl-PEI bark surface.

• Advances in materials Research
• /
• v.2 no.3
• /
• pp.155-172
• /
• 2013

The study of the corrosion inhibition of armatures made of steel conceived for reinforced concrete by sodium phosphate is the aim object of our experimental tests. Gravimetric and electrochemical measurements were carried in three different Mediums contaminated by chlorides (3% NaCl) with addition of increasing concentrations of sodium phosphate. Inhibitory efficiency reached 80% at an optimal concentration of $7,5{\times}10^{-3}M$, the results obtained using the gravimetric measurements are in good agreement with those obtained by electrochemical methods. However, the monitoring of the pH evolution after 24h shows in the three studied environments, that the pH decreases slightly at 24 hours from the initial pH at $t_0$, due to the presence of corrosion products which change the state of the final solution. Also, scanning electron microscopy revealed the existence of layers of apatite on the metal surface previously treated with the sodium phosphate which confirms the formation of a protective film around the surface of the metal.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.751-759
• /
• 2013

This study is carried out to get the basic design parameters for phospate removal facilites from wastewater by Tobermolite. The phosphate removal by the apatite formation on the surface was affected by several important factors, temperature, ions present in wastewater stream, contact time, recirculation rate, and etc. In case of the temperature, with the increase of temperature, the apatite formation was accelerated. When temperature increased from $15^{\circ}C$ to $35^{\circ}C$, removal efficiency of phosphate increased from 83 % to 93 %. An increase of calcium and fluoride ion content increase the apatite formation, however, bicarbonate and magnesium ion inhibited the crystallization of apatite. As expected, when the recirculation rate was increased from 1 Q to 3 Q, at EBCT (Empty Bed Contact Time) 60min enhanced removal efficiency was observed. The more the recirculation rate increased, the more the removal efficiency increased. According to the results of column experiment using an actual wastewater with low and high phosphate concentration (5 mg/L and 50 mg/L-P), the removal efficiency was 77 % at EBCT of 45 min, and 80 % at 60 min. It was suggested that optimum EBCT was 45 min.