• 대한화학회지
• /
• 제60권4호
• /
• pp.286-291
• /
• 2016

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.283-287
• /
• 1993

p-(2,2,3,3-Tetracyanocyclopropyl)phenyl acrylate (3a) and p-(2,2,3,3-tetracyanocyclopropyl)phenyl methacrylate (3b) were prepared by the reactions of bromomalononitrile with p-acryloyloxybenzylidenemalononitrile (2a) or p-methacryloyloxy-benzylidenemalononitrile (2b), respectively. Compounds 3a and 3b were polymerized with free radical initiators to obtain the polymers with multicyano functionalities in the cyclopropane ring. The resulting polymer 4a was soluble in acetone but the polymer 4b was not soluble in common solvents. The inherent viscosities of polymers 4a were in the range of 0.10-0.15 dL/g in acetone and those of 4b were in the range of 0.20-0.30 dL/g in 98% sulfuric acid. Solution-cast films were cloudy and brittle, showing $T_g$ values in the range of 106-125$^{\circ}$C.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.539-544
• /
• 2006

2-Furancarboxaldehyde-2-pyridinylhydrazone (FPH) and 5-methyl-2-furancarboxaldehyde-2-pyridinylhydrazone (MFPH) were synthesized and used as tridentate ligands of copper (I) bromide for the atom transfer radical polymerization of methyl methacrylate (MMA) and styrene. The polymerization of methyl methacrylate achieved high conversion and yielded polymers with a good control of molecular weight and low polydispersity (PDI=1.33). Higher PDI were observed in the polymerization of styrene. Using 1-phenyl ethylbromide (PEBr) and ethyl 2-bromoisobutyrate (EBiB) as model compounds for the polymeric chain ends, the activation rate constants of the new catalytic systems were measured. These results were correlated with the polymerization results and compared with another catalytic system previously reported.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.1-5
• /
• 2018

In this study, we designed and synthesized novel thermal radical initiators of BTAP (1-phenyl-3,3-dipropyltriazene), BTACP (1-(phenyldiazenyl)pyrrolidine), BTACH (1-(phenyldiazenyl)piperidine), and BTACH7 (1-(phenyldiazenyl)azepane) based on a triazene moiety to provide a thermal initiator for radical polymerization. The synthetic method is valuable due to the simplicity. In addition, the synthesized thermal initiator did not affect the color of the polymer. Among the four initiators, the polymerization time for the BTACH of the 6-membered ring decreased by 67%, as opposed to the polymerization time without initiator. Conversion after polymerization was over 92%. DSC experiments also showed that the initiator with hexagonal rings had the lowest peak polymerization temperature of $160^{\circ}C$. Our study suggests a promising new initiator system that is effective for radical polymerization.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.95-96
• /
• 2006

Surface modification of clay minerals has become increasingly important for improving the practical applications of clays such as polymeric nanocomposites. We used the copolymer as modifiers having phenyl components, and successfully developed a route for the preparation of amine functionalized polymer based on oligostyrene and its block copolymers. The oligo(St-co-VBC)s with controlled molecular weight were synthesized via nitroxide mediated polymerization method. We also successfully prepared organophilic layered silicates whose surface is covered with styrenic copolymers. Through the analysis of chemical structure and morphology, we concluded that copolymers were very effective organic modifiers to change the surface characteristics of layered silicates.

• Macromolecular Research
• /
• 제17권8호
• /
• pp.557-562
• /
• 2009

The free radical polymerization of styrene was initiated with azobis(isobutyronitrile) in the presence of benzene sulfonyl chloride. Analysis of the terminal structures of the obtained polystyrene with $^1H$ NMR spectroscopy revealed the presence of a phenyl sulfonyl group at the ${\alpha}$-end and a chlorine atom at the ${\omega}$-end of each polystyrene chain. The terminal chlorine atom in the polystyrene chains was further confirmed through atom transfer radical polymerization (ATRP) of styrene and methyl acrylate using the obtained polystyrenes as macroinitiators and CuCl/2,2'-bipyridine as the catalyst system. GPC traces of the products obtained in ATRP at different reaction times were clearly shifted to higher molecular weight direction, indicating that nearly all the macroinitiator chains initiated ATRP of the second monomers. In addition, the number-average molecular weights of the polystyrenes increased directly proportional to the monomer conversions, and agreed well with the theoretical ones.

• 임산에너지
• /
• 제23권1호
• /
• pp.45-68
• /
• 2004

The word of lignin is derived from the Latin word 'ligum' meaning wood. Lignin is complex polymer consisting of coniferyl alcohol, sinapyl alcohol and p-coumaryl alcohol unit and has an amorphous, three dimensional network structure which is hard to be hydrolyzed by acid. Lignin is found in the cell wall of plants lignified. The mode of polymerization of these alcohols in the cell wall lead to a heterogeneous branched and cross-linked polymer in which phenyl propane units are linked by carbon-carbon and carbon-oxygen bonds. This polymerization of precursors, p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol to lignin is formed by enzymic dehydrolyzation. The reaction is initiated by an electron transfer which results in the formation of resonance-stabilized phenoxy radical. The combination of these radicals produces a variety of dimers, trimers and oligomers and so on. Lignin research has been divided into basic and practical application field. The basic studies contains biosynthesis, chemical structure, distribution in the cell wall and reactivity by reductants, oxidants and organic solvents. The application research will be approached the reaction of lignin in various pulp making involving pulp bleaching and its effect on pulp qualities. Lignin also will be studied for the production of fine chemicals, polymer products and the conservation into an energy source like petroleum oil because the amount of lignin produced in pulp making process is more than 51,000,000 tons per year in the world. Both basic and application research must lay emphasis on the development for the utilization of lignin and the pulping process. But these researches can not be completed without understanding lignin structure containing functional groups. Therefore, this paper was focused on the review of lignin formulation which has been studied since 1948 in chronological order. This review was based on monomers, dimers, trimers and tetramers of phenyl propane unit structures which were isolated and identified by different methods from various wood.ious wood.

• 폴리머
• /
• 제34권6호
• /
• pp.517-521
• /
• 2010

리튬이온 이차전지에는 폴리에틸렌 격리막이 주로 사용되어 오고 있다. 전지의 고온 안정성 확보를 위해서는 폴리에틸렌 격리막보다 높은 멜트다운(melt down) 온도를 갖는 격리막이 요구된다. 이를 위해 폴리에틸렌 격리막을 단량체인 2,2-bis[4-(2-hydroxy-3-methacryloyloxypropoxy)phenyl]propane(bis-GMA) 혹은 이의 유도체들로 코팅하고 이를 라디칼 중합반응시켰다. 점도가 높은 bis-GMA를 사용한 경우에는 라디칼 중합반응이 진행되지 않은 반면 점도가 낮은 bis-GMA 유도체를 사용한 경우에는 라디칼 중합반응이 진행되었다. 적절한 함량의 bis-GMA 유도체를 포함한 반응액으로 격리막을 코팅하고 이를 중합반응시켜 격리막을 제조한 결과, 격리막의 통기도 감소없이 멜트다운 온도를 $160^{\circ}C$까지 향상시킬 수 있었다.

• Journal of Information Display
• /
• 제11권3호
• /
• pp.95-99
• /
• 2010

A series of new dielectric polymers with phenyl, epoxy, and carboxylicacid functional groups was prepared via free-radical polymerization. The effect of such dielectric polymers with various functional groups on the performance of OTFT was investigated. The nonpolar groups of terpolymer made the surface of the dielectric layer more hydrophobic and improved the crystal growth of pentacene on the gate insulator, resulting in higher mobility. By controlling the functional group, the electric characteristics of OTFT performance was varied, with $0.00017-0.15\;cm^2/V{\cdot}s$ mobility.

• Bulletin of the Korean Chemical Society
• /
• 제24권12호
• /
• pp.1809-1813
• /
• 2003

Monomeric antioxidant 1 was prepared by the reaction of 3,5-di-tert-butyl-4-hydroxybenzyl alcohol with N-[4-(chlorocarbonyl)phenyl]maleimide in the presence of imidazole. Monomeric antioxidant 2, bearing carbamate group, was synthesized from the reaction of 3,5-di-tert-butyl-4-hydroxybenzyl alcohol and azidomaleimide. Antioxidant 3 was prepared by the reaction of N-(4-hydroxyphenyl)maleimide and 3-(3,5-ditert-butyl-4-hydroxyphenyl) propionic chloride in the presence of triethylamine. These reactive antioxidants were grafted onto polypropylene (PP) by melt-processing with free radical initiators in a mini-max moulder. From the infrared spectra of the grafted PP, it was found that the monomeric antioxidants were grafted onto PP. IR spectroscopic methods were used for the quantitative determination of the extent of grafting of monomeric antioxidant. To optimize the reaction conditions, the influences of the concentration of DCP, monomeric antioxidant, reaction time and temperature on the extent of grafting were studied.