• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.10-24
• /
• 2007

본 연구에서는 연료전지의 전압을 $380[V_{DC}]$로 승압하기 위한 새로운 절연형 DC-DC 컨버터와 단상 $220[V_{DC}]$로 변환하기 위한 LC필터를 가진 PWM 인버터로 구성된 연료전지용 전력변환장치를 제안하였다. 여기서 기존의 컨버터보다 부품수가 적고 제어가 용이하며, 대용량에 적합한 새로운 DC-DC 컨버터는 2차측에 스위치 $S_5,\;S_6$을 추가로 구성하여 위상천이 폭을 조절함으로써 출력 전력을 제어할 수 있으며, 넓은 출력 전압 조정에서도 $93{\sim}97[%]$의 효율을 얻을 수 있다. 그리고 연료전지와 유사한 출력 특성을 갖는 연료전지 시뮬레이터를 구현하였으며, 적절한 데드 타임 td을 제어하여 고주파 변압기의 여자 전류의 피크값과 고주파 변압기 1차측 전류가 일치하는 부분에서 소프트 스위칭을 실현 시켰다. 또한 직렬 인덕턴스 La를 추가적으로 적절하게 설정하여 2차측의 스위치와 직렬 다이오드에 발생하는 서지 전압과 경부하시에 발생되는 도통 손실을 저감시켰다. 끝으로 TMS320C31보드와 EPLD를 이용한 PWM 스위칭 기법에 의해 동작하는 단상 인버터를 설계, 제작하여 가정용 교류전압 공급에 유용하게 활용할 수 있다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.337-340
• /
• 2007

In the dissertation, a power conversion system for fuel cell is composed of a PWM inverter with LC filter in order to convert fuel cell voltage to a single phase 220[V], In addition, new insulated DC-DC converters are proposed in order that fuel cell voltage is boosted to 380[V]. In this paper, it requires smaller components than existing converters, which makes easy control. The proposed DC-DC converter controls output power by the adjustment of phase-shift width using switch S5 and S6 in the secondary switch, which provides 93-97[%] efficiency in the wide range of output voltage. Fuel cell simulator is implemented to show similar output characteristics to actual fuel cell. Appropriate dead time td enables soft switching to the range where the peak value of excitation current in a high frequency transformer is in accordance with current in the primary circuit. Moreover, appropriate setting to serial inductance La reduces communication loss arisen at light-load generator and serge voltage arisen at a secondary switch and serial diode. Finally, TMS320C31 board and EPLD using PWM switching technique to act a single phase full-bridge inverter which is planed to make alternating current suitable for household.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권7호
• /
• pp.500-508
• /
• 2000

Basic design for single-phase active power filter, which aims at railway application provided with PWM-controlled converters, is comprehensively studied and its performance is presented in this paper. Active power filters are used to compensate railway signaling and public telecommunication interference due to the high-order harmonic currents generated in railway traction locomotives. A type of hybrid digital filter which is composed of low pass filter and high pass filter is proposed so that the desired harmonic reference current with accurate magnitude and phase shift can be extracted from catenary line current. A design criteria to determine input inductor L and output capacitor C is also described, considering voltage, current, PWM pattern, and switching frequency of the main converters. Finally, computer simulation and DSP-based experiments resulted from laboratory test are presented.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.384-394
• /
• 1999

This paper deals with a fixed frequency full-bridge inverter type DC-DC high-power converter with high frequency high voltage(HFHV) transformer-coupled stage, which operates under quasi-resonant ZVS transition priciple in spite of a wide PWM-based voltage regulation processing and largely-changed load conditions. This multi-resonant(MR) converter topology is composed of a series capacitor-connected parallel resonant tank which makes the most of parasitic circuit reactive components of HFHV transformer and two additional quasi-resonant pole circuits incorporated into the bridge legs. The soft-switching operation and practical efficacy of this new converter circuit using the latest IGBTs are actually ascertained through 50kV trially-produced converter system operating using 20kHz/30kHz high voltage(HV) transformers which is applied for driving the diagnostic HV X-ray tube load in medical equipments. It is proved from a practical point of view that the switching losses of IGBTs and their electrical dynamic stresses relating to EMI noise can be considerably reduced under a high frequency(HF) switching-based phase-shift PWM control process for a load setting requirements.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.91-92
• /
• 2015

본 논문에서는 DAB(Dual Active Bridge) 타입의 절연형 양방향 DC/DC 컨버터의 출력전압 제어기법을 제시한다. SPS(Single-phase shift) PWM 기반의 고조파 모델에 대해 슬라이딩 모드 제어기(SMC)를 설계한다. 제시된 기법은 시뮬레이션 결과에 의해 성능이 검증된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.22-24
• /
• 2006

Of all the proposed resonant techniques, the well-known phase-shifted full bridge converter remains one of the most attractive because it offers an easy way of achieving ZVS with a minimum of extra components added, which is essential for the high power applications. This paper describes the design of a digital controller for a Phase Shifted Full-bridge PWM Converter. The small-signal model is derived incorporating the effects of phase-shift control and the utilization of the transformer leakage inductance and power FET junction capacitances to achieve the zero-voltage resonant switching. Based on the derived small-signal model, the digital controller is designed in the discrete domain. The performance of designed controller is verified through the simulation.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1508-1516
• /
• 2015

A single phase H-bridge inverter is employed in conventional Inductive Power Transfer (IPT) systems as the primary side power supply. These systems may not be suitable for some high power applications, due to the constraints of the power electronic devices and the cost. A high-frequency cascaded multi-level inverter employed in IPT systems, which is suitable for high power applications, is presented in this paper. The Phase Shift Pulse Width Modulation (PS-PWM) method is proposed to realize power regulation and selective harmonic elimination. Explicit solutions against phase shift angle and pulse width are given according to the constraints of the selective harmonic elimination equation and the required voltage to avoid solving non-linear transcendental equations. The validity of the proposed control approach is verified by the experimental results obtained with a 2kW prototype system. This approach is expected to be useful for high power IPT applications, and the output power of each H-bridge unit is identical by the proposed approach.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.49-58
• /
• 1997

In this paper, a transfer function was obtained for a PWM high speed solenoid valve controlled metal belt CVT system. The transfer function was defined as the ratio of speed ratio to PWM duty ratio and derived in time domain by linear regression analysis from the experimental results. The transfer function obtained showed different dynamic characteristics for the up and down shift. Also, LQG/LTR controller was designed for the CVT system using the transfer function. It is seen from the experimental results that LQG/LTR control showed good performance for the speed ratio tracking and disturbance rejection. The phase difference and relatively slow response are considered due to the inaccuracy os the transfer functions, which resulted from the inherent nonlinearities of the transmission characteristics of the metal belt CVT.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.394-399
• /
• 2001

반도체 생산 공정에 있어, 저압 화학적 기상 증착(Low Pressure Chemical Vapor Deposition)과 프라즈마 강화 화학적 기상 증착(Plasma Enhanced Chemical Vapor Deposition) 공정 후 발생된 환경 유해 가스를 효과적으로 세정하기 위한 장비인 건식 세정기(dry scrubber)의 전원장치에 대한 연구이다. 주 전력회로는 1500W, 스위칭주파수 100kHz의 위상 변위 풀 브리지(Phase Shift Full-Bridge)방식의 인버터와 100kHz 저역 통과 필터 및 임피던스 변환기로 구성되었다 모드해석과 모의실험을 통하여 회로방식의 타당성을 확인하였고 50$\Omega$ dummy load 및 chamber 실험을 통하여 다양한 부하조건에서도 프라즈마를 안정되게 발생시킬 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.209-211
• /
• 1995

This paper is concerned with High Frequency, High Voltage Generator for X-ray using zero-voltage soft-switching PWM DC-DC high-power converter by Resonant method, which makes the most of the parastic LC parameters of high-voltage transformer link, for diagnostic X-ray power generator. The converter circuit basically utilizes phase-shift pulse width modulated series Resonant full-bridge PWM DC-DC high-power converter operating at a constant frequency;25kHz. The converter output regulation is digitally controlled using DSP (Digital Signal Processor) for obtaining a fast rising time and adjust output voltage within a wide load range.