• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1114-1117
• /
• 1998

Recent applications of neural networks to power system fault diagnosis have provided positive results and have shown advantages in process speed over conventional approaches. This paper describes the application of neural network to fault detection and classification in distribution lines using the fundamental component, 2-5th harmonics index, even and odd harmonics index, and zero phase current. The Electromagnetic Transients Program (EMTP) is used to obtain fault patterns for the training and testing of neural networks. The proposed fault detection and classification method in distribution lines is obtained by analysing the difference among normal, HIF, ground fault, short circuit fault condition.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.1-7
• /
• 2014

Brushless Direct Current(BLDC) Motor is essential to measure a rotor position because of that this motor type needs to synchronize the rotor's position and changeover phase current instead of a brush and commutator used on the existing dc motor. Recently, many researches have studied on sensorless control drive for BLDC motor. The conventional control methods are a compensation value dq, Kalman filter, Fuzzy logic, Neurons neural network, and the like. These methods has difficulties of detecting BEMF accurately at low speed because of low BEMF voltage and switching noise. And also, the operation is long and complex. So, it is required a high-performance microprocessor. Therefore, it is not suitable for a small BLDC motor sensorless drive. This paper presents control methods suitable for economic small BLDC motor sensorless drive which are an improved design of the BEMF detection circuit, simplifying a complex algorithm and computation time reduction. The improved motor sensorless drive is verified stability and validity through being designed, manufactured and analyzed.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.157-164
• /
• 2000

This paper presents a method to detect a rotor position and to drive a BLDC motor from standstill to medium speed without any position sensor comparing the current responses due to the inductance variation in the rotor position. A rotor position at a standstill is identified by the current responses of six pulses injected to each phase of a motor. Once the motor stars up pulse train that is composed of long and short pulses is injected to the phase corresponding to produce the maximum torque and the next phase continuously. it provides not only the torque but also the information of the next commutation time effectively when the response of long and short pulses crosses each other after the same time delay. This method which is verified experimentally using a DSP can drive a BLDC motor to the medium speed smoothly without any rattling and time delay compared with the conventional sensorless algorithm.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.61-67
• /
• 2012

3상 전동기를 이용하는 3상 전력계통에서 1상이 결상되면 계통에는 불평형 전류가 흐르거나 단상전력이 공급되어 전동기 코일의 과전류로 인한 화재발생은 물론 전력계통에 큰 피해를 주게 된다. 최근 3상 전동기 결상검출 방식으로는 열동 과전류계전기와 전자식 모터 보호계전기가 대다수 이용되고 있으며, 이들은 선로의 과열이나 과전류가 발생되면 검출하고 차단기를 동작시키는 방식으로 감지속도가 느리고 오동작과 정밀도가 떨어지는 문제점이 있다. 이들을 개선하기위하여 본 논문에서는 반도체 소자를 이용한 새로운 결상보호용 제어회로 토폴로지를 설계하여 감지속도와 정밀도를 향상시키고, 소형 경량으로 제작되어 현장의 3상 전동기 제어반에 용이하게 장착시킬 수 있는 장점이 있다. 그 결과 제안한 결상 보호장치는 3상 전동기를 보호하고 결상으로 발생하는 전기화재를 최소화시키고 그리고 전력계통의 안정적인 운전에 기여할 수 있을 것이다. 제안한 결상 보호장치는 다양한 동작특성 실험을 통하여 그 성능과 신뢰성이 입증된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.737-739
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. Also, the current slope is adopted to complete the sensorless control when the motor running with heavy torque at high speed condition. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.393-396
• /
• 2001

This paper presents the sensorless control technique with cost competitive phase currents detection for PMSM drives. The phase currents are detected by two methods : one is from the do link current, another is from the currents of the lower legs of the inverter switches. The sensorless control with the phase currents dectection is implemented with DSP. It is verified through the experiment that the estimated rotor position tracks the real rotor position at the low speeds and high speeds operation with flux weakening.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.355-364
• /
• 2013

Respect to the input AC voltage and output DC voltage, conventional three-phase PWM rectifier is classified as the voltage type rectifier with boost capability and the current type rectifier voltage with buck capability. Conventional PWM rectifier can not at the same time the boost and buck capability and its bridge is weak in the shoot- through state. These problems can be solved by Z-source PWM rectifier which has all characteristic of voltage and current type PWM rectifier. By shoot-through duty ratio control, the Z-source PWM rectifier can buck and boost at the same time, also, there is no need to consider the dead time. This paper proposes the input AC voltage sensorless control method of a three-phase Z-source PWM rectifier in order to accomplish the unity input power factor and output DC voltage control. The proposed method is estimated the input AC voltage by using input AC current and output DC voltage, hence, the sensor for the input AC voltage detection is no needed. comparison of the estimated and detected input AC voltage, estimated phase angle of the input voltage, the output DC voltage response for reference value, unity power factor, FFT(Fast Fourier Transform) of the estimated voltage and efficiency are verified by PSIM simulation.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1275-1279
• /
• 2018

We investigate the change of the Fano effect by considering one Majorana zero mode to couple laterally to the single-dot Fano interferometer. It is found that the Majorana zero mode quenches the Fano effect thoroughly and causes the conductance to be independent of the dot level, the dot-lead coupling, and the increase of the Majorana-dot coupling. As a result, the linear conductance becomes only related to the interlead coupling and the magnetic-flux phase factor. These results can be helpful for the detection of Majorana zero mode.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.805-808
• /
• 2005

We constructed an eddy current tester as education programs of electronics and computers. The tester is designed based on frequency counting of square-waves digitally, where information of phase is lost, but which is very compact. Main controller of the tester is PIC16HC84A. Other parts, detection-coils, oscillators, and stabilizers are made by us. The tester is able to detect change of order(-5) in waves of 1MHz, whose function is kept in several minutes. The measurement period is 10-20 msec in the several minutes. Using the tester, we observed narrow gaps of copper/aluminum wires, and detected resistivity difference of 1.7 or 2.7 [$10^{-8}$ $ohm^{\ast}m$].

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.596-600
• /
• 1998

A method for the nondestructive read-out of the memory in ferroelectric thin films is demonstrated using the detection second harmonic currents introduced in the ferrolelectric capacitor as a response to an ac signal. The sign and phase of the second harmonic current depends on the polarized state +$P_r or -P_r$, The studied ferroelectric PZT thin film is found to have desirable features for the use as a memory element. This method and material seems as a promising approach for the nonvolatile memory storage.