• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1079-1080
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.96-100
• /
• 1997

The shadow moire is one of the optical techniques which is able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a master grating and its shadow projected on the surface of an object. In case of the classical shadow moire method, the sensitivity was a few tenths millimeters. generally, it is difficult to use a phase shift method in shadow moire because it is impossible to obtain uniform phase shifts on the whole field. But in this study we use the fact that if the depth of object is much less than the distance between the observer and the master grating, and the object is displaced perpendicularly to the grating plane, phase shifts are almost uniform. Finally we obtained a better resolution by using a phase shift procedure and applied the phase shifting shadow moire to three dimensional shape measurement.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1096-1100
• /
• 2012

In the phase-shift measurement method, the distance light travels can be obtained based on the phase difference between the reference signal and the measured signal. When the object having various colors is measured, the intensity of the measured signal much varies even at the same distance, and it causes different phase delay due to wide dynamic range input to a signal processing circuit. In this work, an measured intensity control method is proposed to solve this phase delay problem.

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.1-9
• /
• 1999

We have studied the sensitivity of four different phase shift measurement schemes with a Mach-Zehnder interferometer. The input light is considered to be in a coherent state and the detectors are assumed to be ideal with the quantum efficiency of unity. It is shown by direct calculation of the operators corresponding to the measurement schemes that the uncertainty of the phase-shift measurement is limited to the classical one $\frac{1}{\sqrt{m}}$(m is the average number of the photons in the input state) regardless of the phase-shift measurement schemes.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.1-6
• /
• 1997

A transmission type phase shift attenuator has a poor reflection characteristics at an output port. And that is controlled by the current, its dynamic rnage decreases due to the current limitation. In this paper, to avoid such disadvantages, a reflection type low phase shift attenuator has been designed and measured. As a result, at a center frequency (1855MHz), the sreflection type low pahse shift attenuator has an attenuation of 30dB, within the limit of 3 phase shift and less than -17dB reflection characteristics at both input and output ports. And it demonstrates the peformance of the reflection type low phase shift attenuator is better than the transmission type phase shift attenuator with the same measurement specifications.

• 전기화학회지
• /
• 제2권1호
• /
• pp.23-26
• /
• 1999

백금$(Pt)/0.1M\;H_2SO_4$, 전해질 계면에서 교류임피던스 측정과 위상이동 방법을 사용하여 Langmuir 흡착등온식을 정성적으로 해석하였다. 위상이동$(\phi)$은 음전위(E<0)와 주파수(f)에 따르며, Pt 일전극(음극)에 흡착된 수소원자$(H_{ads})$의 표면피복율$(\theta)$에 반비례한다. 중간주파수대$(1\~100 Hz)$에서 위상이동 변화$(\phi\;vs.\;E)$는 Langmuir 흡착등온식$(\theta\;vs.\;E)$의 계산과 해석에 사용할 수 있는 실험적인 방법이다. $Pt/0.1M\;H_2SO_4$ 전해질 계면에서 흡착평형상수(K)와 표준자유에너지$({\Delta}G_{ads})$는 각각 $3\times10^{_4}$와 20.1kJ/mol이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.589-591
• /
• 2004

In this paper, we developed a laser distance measurement(LDM) system based on DSP. We applied PPD(Pulsed Phase Detection) algorithm to the LDM system. The PPD algorithm calculate the distance from the LDM system to the object by using phase detection. Reference waveform at a fixed frequency is sampled by both the inner-loop and outer-loop pulse signal. The LDM system detects the difference of phase between the sampled signals. We obtained an accuracy of ${\sigma}=25.5mm$ from the LDM system.

• 한국통신학회논문지
• /
• 제37권6C호
• /
• pp.453-461
• /
• 2012

본 논문에서는 진폭 변조 거리 측정 시스템에 적용 가능한 개선된 위상 추정 기법을 제안한다. 기존 위상 측정 방법은 이동 목표물의 도플러 천이에 의해 위상 측정 오차가 발생한다. 제안된 위상 추정 기법은 도플러 천이에 대해 적응 도플러 보정(Adaptive Doppler Correction)을 사용하여 위상 추정 오차를 보정하므로 거리 측정 정확도를 향상 시킬 수 있다. 모의실험 결과 도플러 주파수 천이 보정은 기존 방식보다 94.7% 향상된 성능을 보이며, 거리 측정 정확도는 50%로 향상되었다. 음향 수조에서는 오차가 7.7cm로 추정되어 해양 환경에서 음파를 이용하여 거리 추정에도 적용 가능함을 확인하였다.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.564-574
• /
• 1996

This paper describes as Electronic Speckle Pattern Interferometry system which has been designed for measuring vibration patterns and quantitative measurement of vibration amplitude fields by using the time average method on a object. Visbility of fringe patterns is more improved by using the phase stepping and frame average method to reduce speckle and electric noise. And a bias vibration is introduced into the reference beam to shift the $\frac{2}{0}$ fringes so that fringe shift algorithms can be used to determine vibration amplitude. The experimental results are compared to those of the FFT analyzer and the FEM model analysis.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.172-178
• /
• 2002

One of the ever-increasing demands on the performances of heterodyne interferometers is to improve the measurement resolution, of which current state -of-the-art reaches the region of sub-nanometers. So far, the demand has been met by increasing the clock speed that drives the electronics involved fur the phase measurement of the Doppler shift, but its further advance is being hampered by the technological limit of modem electronics. To cope with the problem, in this investigation, we propose a new scheme of phase -measuring electronics that reduces the measurement resolution without further increase in clock speed. Our scheme adopts a super-heterodyne technique that lowers the original beat frequency to a level of 1 MHz by mixing it with a stable reference signal generated from a special phase- locked-loop. The technique enables us to measure the phase of Doppler shift with a resolution of 1.58 nanometer at a sampling rate of 1 MHz. To avoid the undesirable decrease in the maximum measurable speed caused by the lowered beat frequency, a special form of frequency up-down counting technique is combined with the super-heterodyning. This allows performing required phase unwrapping simply by using programmable digital gates without 2n ambiguities up to the maximum velocity guaranteed by the original beat frequency.