• 한국분무공학회지
• /
• 제5권2호
• /
• pp.22-27
• /
• 2000

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.77-84
• /
• 2005

OFDM(Orthogonal Frequency Division Multiplexing) 및 SC-CP(Single Carrier with Cyclic Prefix) 방식은 문선 분야에서 각기 각광받고 있으며, 두 방식 모두 주파수 영역에서 효율적인 등화를 수행할 수 있는 장점을 지니고 있다. 무선 채널의 도플러 쉬프트 현상이 수반되는 경우 등화기만으로 온전히 왜곡 보상이 여의치 않을 수 있으며, 이에 따라 위상에러 추적회로와 등화기를 연동시켜 성능 향상을 도모할 수 있다. 본 논문에서는 평균위상에러의 효과를 기술하였고, 결정지향 방식의 평균위상 에러 추적회로와 proportional 등화기를 연동한 성능을 설계하였다. 아울러 시뮬레이션 결과를 통해 시스템의 성능 저하를 최소화하면서 추적회로의 연산 부담을 줄일 수 있음을 제시하였다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.224-232
• /
• 2016

The methodology to visualize the shape of blood vessel and its blood flow have been attracting as a very interesting problem to forecast and examinate a disease in thrombus precursor protein. May previous visualization researches have been appeared for designing the blood vessel and also modeling the blood flow using a doppler imaging technique which is one of nondestructive testing techniques. General visualization methods are to depict the blood flow obtained from doppler effects with fragmentary stream lines and also visualize the blood flow model using volume rendering. However, these visualizeation techniques have the disadvantage which a set of small line segments does not give the overall observation of blood flows. Therefore, we propose a visualization system which reconstruct the continuity of the blood flow obtained from doppler effects and also visualize the blood flow with the vector field of blood particles. This system will use doppler phase difference from medical equipments such as OCT with low penetration and reconstruct the blood flow by the curvature estimation from vector field of each blood particle.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.234-239
• /
• 2012

This paper presents a compact K-band Doppler radar sensor for human vital signal detection that uses a radar configuration with only single coupler. The proposed radar front-end configuration can reduce the chip size and the additional RF power loss. The radar front-end IC is composed of a Lange coupler, VCO, and single balanced mixer. The oscillation frequency of the VCO is from 27.3 to 27.8 GHz. The phase noise of the VCO is -91.2 dBc/Hz at a 1 MHz offset frequency, and the output power is -4.8 dBm. The conversion gain of the mixer is about 11 dB. The chip size is $0.89{\times}1.47mm^2$. The compact Ka-band Doppler radar system was developed in order to demonstrate remote human vital signal detection. The radar system consists of a Ka-band Doppler radar module with a $2{\times}2$ patch array antenna, baseband signal conditioning block, DAQ system, and signal processing program. The front-end module size is $2.5{\times}2.5cm^2$. The proposed radar sensor can properly capture a human heartbeat and respiration rate at the distance of 50 cm.

• Annals of Clinical Neurophysiology
• /
• 제1권1호
• /
• pp.76-79
• /
• 1999

The most significant factor in pathogenesis of vascular headaches like migraine and cluster headache is dynamic changes of diameters of the cerebral arteries. TCD is a valuable noninvasive tool to assess the cerebral hemodynamic status by measuring the flow velocities of the intracranial cerebral arteries around the circle of Willis. TCD can evaluate flow velocities and vasoreactivity of the patients with a vascular headache during the ictal phase as well as during intericatal phase. Distribution of the changes recorded differ between types of headaches and also between the major ictal symptoms. The changes suggest the presence of prolonged vasospasm interictally and more marked relaxation of the cerebral arteries. TCD can be used to monitor the long-term clinical course of patients with vascular headache by correlation the symptomatic improvement and TCD data before and after long-term pharmacological prophylactic treatments. During the ictal phases large intervention. The results may be used in selecting and evaluating the agents for abortive therapy for acute attacks. In conclusion TCD can quantitatively evaluate vascular headaches when making diagnosis and classification and can provide guidelines to choose more individualized therapeutic options for both acute and long-term treatment.

• 천문학회지
• /
• 제53권3호
• /
• pp.69-75
• /
• 2020

We study the photometric phase curves for the planets of our solar system which can be considered as a prototypical non-compact planetary system. We focus on modeling the small variations caused by three effects: reflection, ellipsoidal, and Doppler beaming. Theoretical predictions for these photometric variations are proposed, considering a hypothetical external observer. Unlike similar studies of multi-planetary systems, the physical and geometrical parameters for each planet of the solar system are well-known. Therefore, we can accurately evaluate the relationships that shape the planetary light curves for a fictitious external observer. Our results suggest that, for all planets, the ellipsoidal effect is very weak while the Doppler beaming effect (DBE) is, in general, dominant. In fact, the DBE seems to be the principal cause of variations of the light curves for the planets of the solar system. However, for Mercury and Venus the Doppler beaming and reflection effects have similar amplitudes. The phase curves obtained for the planets of the solar system show new interesting features of interest for the study of other non-compact planetary systems.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.125-131
• /
• 2000

A high resolution Laser Doppler Vibrometer(LDV) developed using electronic fringe counting method. The fringe pattern signal obtained via analog signal processing is divided into two. One was converted to a TTL signal with a ZCD(zero-crossing detector) and then counted to calculate the displacement due to the vibration. The other was directed to the A/D converter to get a high resolution of about $\lambda/320$ with the phase comparison method. The data obtained with the A/D converter was used in the displacement calculation and the result was displayed on a LCD pane. In this study, a Laser Doppler Vibrometer with measurement range of $0.32\mum~129\mum$ and displacement resolution of 2nm, about $\lambda/320$ , was developed. And this LDV can be used to measure the dynamic of microsize devices such as MEMS(Micro Electro-Mechanical Systems) and to diagnose high capacity electric equipment such as circuit breakers and transformers, of which resonant frequencies are changed when they are damaged.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.53-55
• /
• 2001

A dual probe laser Doppler vibrometer (LDV) that has one laser source and provides two independent object beams has been developed for the first time. An electronic circuit that converts light signal to electronic signal has been also developed using phase locked loop(PLL). It was found that this types of dual probe LDV can be used in differential mode and self-vibration compensation mode.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.102-107
• /
• 1997

A stiffness in a dynamical system is numerically studied to investigate a sensitivity of a reactor to the delayed neutron spectra with the Doppler feedback. To test numerical procedure, we adopted a case of a reactivity accident in a point reactor model. We found that the stiffness is sensitive to a reactivity insertion rate and the delayed neutron spectra in the Doppler feedback phase. Our numerical results show that global reactor characteristics are not very sensitive to the delayed neutron spectra even though their instantaneous ones are sensitive. We present the time evolution of each precursor group explicitly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1838-1840
• /
• 2001

A dual probe laser Doppler vibrometer (LDV) that has one laser source and provides two independent object beams has been developed for the first time. An electronic circuit that converts light signal to electronic signal has been also developed using digital phase locked loop(DPLL). It was found that this types of dual probe LDV can be used in differential mode and self-vibration compensation mode.