• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2021

With increasing interest in fluorinated compounds, nucleophilic fluorination reaction has been generally used for synthesizing fluorine-containing chemicals. However, alkali metal fluorides (MFs) generally have low solubility and reactivity in organic solvent. To overcome these problems, various phase transfer catalysts (PTCs) have been investigated. Calix-arene is known as to capture the metal cation(M⁺), and therefore in this review, we would like to introduce several kinds of calix-arene based PTCs, such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), oligo-ethylene glycol linked bis-triethyleneglycol crown-5-calix[4]arene (BTC5A), and ionic liquid functionalized calix-arene based catalyst, as well as ion-pair receptor crown-6-calix[4]arene-capped calix[4]pyrrole.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.1
• /
• pp.31-37
• /
• 2018

Oil/water (O/W) nanoemulsions are effective vehicles to change the permeability of the skin. In this study, we focused on the preparation and characterization of nanoemulsion which serve as colloidal carriers for the dermal application of ceramide IIIB (CIIIB) and stratum corneum (SC) lipids such as cholesterol, and palmitic acid. In order to optimize the nanoemulsions, emulsification process conditions were conducted with regard to droplet size, nanoemulsion stability, and solubility of CIIIB. A decrease in droplet size was observed through emulsification temperature of $80^{\circ}C$ and phase inversion composition (PIC) method. CIIIB has low solubility in oil and water. When the concentration of CIIIB was increased, the droplet size of nanoemulsion was increased. When Lipoid S75-3 was added to the oil phase, the solubility of CIIIB increased, indicating some interactions shown in DSC measurements. CIIIB and SC lipids could be successfully incorporated in nanoemulsions without crystallization or physical instability. In conclusion, a stable nanoemulsion containing the SC lipids could be effective as an efficient moisturizing system for skin.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.229-237
• /
• 1996

The superconducting phase, $YBa_{2}Cu_{3}O_{x}$ (YBCO), was in-situ deposited on the single crystal MgO substrates, using an aerosol decomposition process in a cold plasma reactor. The solubility and decomposition temperature of the chemical precursors, and the vapor pressures of the solvents, were determined to be the factors crucial to achieving a stoichiometric, crystalline YBCO phase. The deposition parameters for the YBCO phase were 0.3 to 2.7 kPa for the oxygen partial pressure and $800^{\circ}C$ to $940^{\circ}C$ for the substrate temperature. The optimum deposition conditions for the YBCO phase were observed along the CuO decomposition line.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.511-517
• /
• 1996

An amphiphilic phase enzyme reaction was used to synthesize alkyl glucosides from glucose and alkyl alcohol with immobilized ${\beta}$-glucosidase using four glycol ether cosolvents(monoglyme, diglyme, 2-methoxyethanol, and 1,4-dioxane). Monoglyme was shown to be the best cosolvent for the amphiphilic phase medium composed of water/cosolvent/alkyl alcohol admixture. To obtain high yield of alkyl glucoside by amphiphilic phase enzyme reaction, hydrophilicity-hydrophobicity of amphiphilic media and enzyme microenvironment was optimized from the viewpoints of substrate solubility, enzyme activity, water activity, and dynamic equilibrium between glucose alcoholysis and glucoside hydrolysis. Under optimum reaction conditions, the highest concentrations of hexyl, octyl, decyl, and dodecyl glucosides were 18.2, 9.68, 7.27, and 6.03g/L, respectively.

• Journal of Environmental Science International
• /
• v.19 no.5
• /
• pp.549-563
• /
• 2010

The environmental behaviors of polycyclic aromatic hydrocarbons (PAHs) are mainly governed by their solubility and partitioning properties on soil media in a subsurface system. In surfactant-enhanced remediation (SER) systems, surfactant plays a critical role in remediation. In this study, sorptive behaviors and partitioning of naphthalene in soils in the presence of surfactants were investigated. Silica and kaolin with low organic carbon contents and a natural soil with relatively higher organic carbon content were used as model sorbents. A nonionic surfactant, Triton X-100, was used to enhance dissolution of naphthalene. Sorption kinetics of naphthalene onto silica, kaolin and natural soil were investigated and analyzed using several kinetic models. The two compartment first-order kinetic model (TCFOKM) was fitted better than the other models. From the results of TCFOKM, the fast sorption coefficient of naphthalene ($k_1$) was in the order of silica > kaolin > natural soil, whereas the slow sorbing fraction ($k_2$) was in the reverse order. Sorption isotherms of naphthalene were linear with organic carbon content ($f_{oc}$) in soils, while those of Triton X-100 were nonlinear and correlated with CEC and BET surface area. Sorption of Triton X-100 was higher than that of naphthalene in all soils. The effectiveness of a SER system depends on the distribution coefficient ($K_D$) of naphthalene between mobile and immobile phases. In surfactant-sorbed soils, naphthalene was adsorbed onto the soil surface and also partitioned onto the sorbed surfactant. The partition coefficient ($K_D$) of naphthalene increased with surfactant concentration. However, the $K_D$ decreased as the surfactant concentration increased above CMC in all soils. This indicates that naphthalene was partitioned competitively onto both sorbed surfactants (immobile phase) and micelles (mobile phase). For the mineral soils such as silica and kaolin, naphthalene removal by mobile phase would be better than that by immobile phase because the distribution of naphthalene onto the micelles ($K_{mic}$) increased with the nonionic surfactant concentration (Triton X-100). For the natural soil with relatively higher organic carbon content, however, the naphthalene removal by immobile phase would be better than that by mobile phase, because a high amount of Triton X-100 could be sorbed onto the natural soil and the sorbed surfactant also could sorb the relatively higher amount of naphthalene.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.3
• /
• pp.133-141
• /
• 1995

The deposition characteristics of diamond films were investigated for three different substrates : Si, Inconel 600 and steel. Diamond films were prepared by microwave plasma CVD method using $CH_4$, $H_2$ and $O_2$ as reaction gases. The deposited films were analyzed with SEM, Raman spectroscopy and ellipsometer. For Si substrate, diamond films were successfully obtained for most of the deposition conditions used in this study. As the $CH_4$ flow rate decreased and the $O_2$ flow rate increased, the quality of the film was improved due to the reduced non-diamond phase in the film. For Inconel 600 substrate, the surface pretreatment with diamond powders was required to deposit a continuous diamond film. The films deposited at temperatures of $600^{\circ}C$ and $700^{\circ}C$ had mainly diamond phase, but they were peeled off locally due to the difference in the thermal expansion coefficient between the substrate and the deposited films. The films deposited at $500^{\circ}C$ and $850^{\circ}C$ had only the graphitic carbon phase. For steel substrate, all of the films deposited had only the graphitie carbon phase. We speculated that the formation of diamond nuclei on the steel substrate was inhibited due to the diffusion of carbon atoms into the steel substrate which has a large amount of carbon solubility.

• Journal of Powder Materials
• /
• v.12 no.2 s.49
• /
• pp.131-135
• /
• 2005

7xxx series Al alloy has the most attractive properties including its excellent high specific strength, stress corrosion cracking and corrosion-resistance. However, in case of the Al-Zn system, the liquid phase has a transient aspect because of the high solid solubility of Zn in Al. Therefore, transient liquid phase sintering behavior was observed during the sintering process. And the amount of liquid and its duration were influenced by the process variables including heating rate and final sintering temperature. At high heating rates($100^{\circ}C/min$), the liquid fraction increased during sintering because diffusion was minimized and therefore local saturation could easily occur. The sintered density increased with increasing heating rate.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2013

The rare earth oxide wastes consisting of major 8 nuclides Y, La, Ce, Pr, Nd, Sm, Eu and Gd, are generated during the salt waste treatment of PyroGreen process. The final form of the rare earth is generated as the oxide state. In this study, six candidate glasses were developed to evaluate the feasibility for vitrifying the rare earth oxide wastes within the borosilicate glass system. The solubilities of the mixture of the rare earth oxide waste showed less than 25wt% at $1,200^{\circ}C$, less than 30wt% at $1,300^{\circ}C$, respectively. It means that solubility is increased with the temperature increment. The liquidus temperature of the homogeneous glass with 20wt% waste loading was determined as less than $950^{\circ}C$. In more than solubility of rare earth oxides glass, formation of rare earth-oxide-silicate crystal in glass-ceramic occurred as the secondary phase. As their viscosity at melting temperature $1,200{\sim}1,300^{\circ}C$ was less than 100 poise, electrical conductivity was higher than 1 S/cm, 20~25wt% waste loading glasses with good surface homogeneity are judged to have good operability in cold crucible induction melter. Other physicochemical properties of the developed glasses are going to be experimented in the future.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.29-38
• /
• 1997

Precipitation was formed during the preparation of decoction from a mixture of Scutellariae Radix and Coptidis Rhizoma. Baicalin and berberine were identified in this coprecipitated product (CPP) and these components were the active ingredients of two herbal medicine. We extracted respectively crude baicalin and berberine in Scutellariae Radix and Coptidis Rhizoma and prepared coprecipitate of crude baicalin-berberine. To increase the stability and bioavailability of coprecipitate of crude baicalin-berberine(CBB), which is slightly soluble drug, its inclusion complex was prepared and studied in this experiment. Inclusion complex of CBB with ${\beta}-cyclodextrin(CBB-{\beta}-CD)$ was prepared by freeze drying method and its characteristics were ascertained by means of solubility test, differential thermal analysis(DTA) and scanning electron microscope(SEM). The type of $CBB-{\beta}-CD$ is classified as $A_L-type$ on phase solubility diagram, and the stoichiometric ratio of CBB(baicalin in CBB) : ${\beta}-CD$ complex is 1:1 and formation constant is 151 $M^-1$. The solubility, dissolution, in situ absorption and serum concentration of $CBB-{\beta}-CD$ were significantly increased when compared to CBB. Therefore enhanced bioavailability of CBB by inclusion complexation with ${\beta}-cyclodextrin$ might be useful for dosage form design of active ingredients of two herbal medicine.

• Nuclear Engineering and Technology
• /
• v.34 no.5
• /
• pp.517-531
• /
• 2002

The speciation and solubility of Am, Np, Pu and U have been analyzed by means of the geochemical code MUGREM, under the chemical conditions of domestic deep groundwater, in order to support the preliminary safety assessment for a Korean HLW disposal concept. Under the conditions of groundwaters studied, the stable solid phase is AmOHC $O_3$(s) or Am(OH)$_3$(s), soddyite((U $O_2$)$_2$ $SiO_2$.2$H_2O$) or N $a_2$ $U_2$ $O_{7}$ (c), Np(OH)$_4$(am), and Pu(OH)$_4$(am) for Am, U, Np, and Pu, respectively. The dominating aqueous species are as follows: the complexes of Am(III), Am(OH)$_2$$^{+}$ and Am(C $O_3$)$_2$$^{[-10]}$ , the complexes of U(VI), U $O_2$(OH)$_3$$^{[-10]}$ and U $O_2$(C $O_3$)$_3$$^{4-}$, the complexes of Np(IV), Np(OH)$_4$(aq) and Np(OH)$_3$C $O_3$, and the complexes of Pu(IV), Pu(OH)$_4$(aq) and Pu(OH)$_3$C $O_3$$^{[-10]}$ . The calculated solubilities exist between 1.9E-10 and 1.3E-9 mol/L for Am, between 5.6E-6 and 1.2E-4 mol/L for U, between 3.1E-9 and 1.3E-8 mol/L for Np, and between 6.6E-10 and 2.4E-10 mol/L for Pu, depending on groundwater conditions. The present solubilities of each actinide agree well with the results of other studies obtained under similar conditions.s.