사장교에 발생하는 지진에 의한 진동을 감소시키기 위해 추가적인 능동/반능동 제어장치를 부착한 LRB-기반 복합 기초격리 시스템에 대한 논문이다. 복합 기초격리 시스템은 제어장치가 다중으로 작동하기 때문에 LRB가 설치된 교량 시스템과 같은 수동형 기초격리 시스템에 비해 제어 성능이 뛰어나다. 본 논문에서는, LQG 알고리듬에 의해 제어되는 능동형 유압식 가력기와 clipped 최적제어에 의해 제어되는 반능동형 자기유변 유체 (MR) 감쇠기를 추가적인 제어장치로 고려하여 추가적인 응답 감소 효과를 검토하였다. 이를 위해, 미국토목학회의 1단계 벤치마크 사장교에 LRB를 설치한 교량을 고려하였다. 수치해석 결과를 통해, 모든 LRB-기반 복합 기초격리시스템이 구조물의 응답을 효과적으로 감소시킴을 확인하였다. 또한, MR 감쇠기를 채택한 복합 기초격리 시스템은 구조물 강성의 불확실성에 대해 강인성을 보였지만 유압식 가력기를 채택한 경우에는 강인성이 부족함을 알 수 있었다. 따라서, 반능동형 추가 제어장치를 채택한 복합 기초격리 시스템의 대형 토목구조물에 대한 적용가능성이 제어 성능 및 강인성 면에서 분명하게 검증되었다.
무선 메쉬 네트워크(WMN: Wireless Mesh Network)는 다중 홉 환경에서 동일한 플로우 내의 홉간의 간섭뿐만 아니라 서로 다른 플로우의 홉간의 간섭으로 인하여 거쳐가는 흡수가 증가할수록 플로우의 종단간 수율이 크게 저하되는 문제점을 가진다. 본 논문은 이동성이 없는 매쉬 라우터로 구성된 WMW의 성능 향상을 위한 홉 기반 분산형 다중 채널 할당 방안 (DMASH: Distributed Multi-channel Assignment Scheme based on Hops)을 제안한다. 제안한 DMASH는 IEEE 802.11 기반의 다중 인터페이스 환경에서 전송 시 무선 채널간의 간섭을 줄임으로써 종단간 수율을 향상시킬 수 있는 새로운 홉 기반의 분산형 다중 채널 할당 방안이다. DMASH는 채널 설정 단계에서 게이트웨이로부터의 흡수를 기반으로 인접 홉간에 서로 간섭을 갖지 않는 채널 그룹을 각 홉에 할당하고, 통일 홉 안에서의 각 노드들은 할당된 채널 그룹 내에서 임의의 채널을 하나 선택한다. DMASH는 WMN에서 각 노드들이 자신의 채널을 자율적으로 선택할 수 있는 분산형 채널 할당 방안으로 중앙 제어형에 비해 오버헤드가 적을 뿐 아니라 구현이 간단한 장점을 가진다 NS-2 시뮬레이션을 통해 DMASH는 다중 홉 환경에서 임의 채널 할당 방식보다 망 전체 수율을 크게 향상할 수 있음을 보였다.
황해 조석모의를 위한 유한요소 격자체계가 h-상세화에 의해 구축되어 이전연구(서, 1999b) 14 K 절점에 비해 210 K로 연안지역 해상이 특별하게 고려되었다. 격자생성시 인접절점간 수심변화, 무차원 조석파장비가 고려되어 전체절점의 약 1/4이 수심 5 m 내외 연안역에 집중적으로 분포되었다. 수심에 ETOPO1 및 30초 정밀자료가 적용되었고 개방경계에 FES2004로부터 자동추출된 8대분조가 정의되었다. 조석모의에는 비선형 3차원 조화모형이 수립되었으며, 연직난류와 바닥마찰계수의 변화에 따른 서해연안의 조석확폭이 모의되었고, 8대분조 및 $M_4,$$MS_4$ 등 비선형 천해조석과 $M_f$ 및 $M_{sf}$의 장주기 등이 재현되었다. 천문조뿐만 아니라 비선형 항의 반복에 의해 계산되는 천해조 해석결과에 마찰계수의 공간적변화가 미치는 영향이 지대하여, 조석 주기별로 다른 값을 적용하는 것이 제시되었다. 조석 비대칭성 분포를 파악하고자 진폭비 $M_4/M_2$와 위상차 $2g(M_2)-g(M_4)$를 계산하였는데, 우리나라 서해연안에 조석왜곡 비율이 0.2에 다다르는 등 천해역 특성이 뚜렷하며 목포해역 전면에 폭넓은 낙조우세가 재현되었다.
전세계적으로 기상조절 연구가 활발히 수행되어져 왔으나 연구 효과를 보다 정량적으로 검증할 수 있는 기술이 필요하다. 본 연구에서는 기상조절 실험에 대한 강수 증가 효율인 시딩효과(seeding effect)를 레이더 자료를 이용하여 검증하였다. 또한, 시딩물질이 대기수상체 변화에 미치는 영향을 분석하였다. 이를 위해 레이더 자료, 기상조건, 확산 수치모의 자료가 사용되었다. 먼저, 시딩전, 시딩중, 시딩후의 세 단계로 시딩효과를 분석할 수 있는 방법을 제안하였다. 제안한 방법을 강원도와 서해 지역을 대상으로 수행된 세 개의 기상조절 실험 사례에 적용하였다. 그 결과, 자연강수가 없을 때는 강수 변화가 예측된 구역에서 감지된 레이더 반사도가 시딩효과로 판단되었다. 자연강수가 발생하면 관측된 최대 반사도에서 자연강수의 영향을 제외하여 시딩효과를 결정하였다. 적용사례에 대해 시딩효과로 강수강도가 0.1 mm/h 증가한 것으로 나타났다. 아울러 시딩 구름에 빙정이나 과냉각 수적, 혼합상의 수상체가 분포한 것으로 나타났다. 이러한 기상조절 연구 결과는 수자원 확보와 구름 물리 연구에 활용할 수 있을 것으로 판단된다.
전산모사 프로그램인 FEMLAB을 이용하여 chiral center를 가지고 있는 racemate인 ibuprofen의 R-form과 S-form의 분리 전산모사 결과와 Kromasil KR100-5CHI-TBB 칼럼을 사용하여 HPLC를 통한 실험데이터를 비교 분석하였다. Hexane/t-BME/acetic acid(45:55:1 v/v%)의 이동상의 조건에서 이론단수(number of theoretical plates), 이론단높이(HETP; Height Equivalent to a Theoretical Plate)을 구하여 축방향 확산계수($Deff_i$)를 계산하였다. PIM(Pulsed Input Method)을 사용하여 분석한 결과 ibuprofen의 농도가 증가할수록 Langmuir 등온흡착식을 따르는 비선형 거동을 보였고, 각 농도에서의 체류시간($t_R$)과 phase ratio를 이용하여 비경쟁적 Langmuir 등온흡착식의 매개변수를 추산하였고, 이 매개변수를 이용하여 경쟁적 Langmuir 등온흡착식을 결정하였다. 실험을 통해 얻은 데이터를 FEMLAB 적용하여 등온흡착식의 변화에 따른 용리띠의 변화와 두 성분이 컬럼을 이동하는 동안 두 성분간 분리 과정을 관찰하였다. Ibuprofen의 농도, 유속을 변화시키면서 실험결과와 전산모사결과를 비교한 결과 실험결과와 전산모사결과가 비슷한 경향성을 보였다. 이와 같이 FEMLAB 전산모사 프로그램의 실험적용 가능성을 확인하였고. 실험과 일치하는 전산모사데이터를 얻기 위해서 고정상내의 세공에서의 물질전달을 포함하는 물질수지식의 적용과 비선형 흡착평형식에 대한 좀 더 정확한 식이 요구된다.
본 논문에서는 대용량급 전력변환회로를 대상으로, 기존 위상천이 풀 브리지 컨버터의 환류 전류 문제를 해결하기 위하여 새로운 모드 가변형 비대칭 풀 브리지 컨버터를 제안한다. 제안된 회로는 구동시비율 D에 따라 50% 이하에서는 비대칭 풀 브리지 컨버터로 동작하며, 50% 이상에서는 능동 클램프 풀 브리지 컨버터로 동작하게 된다. 따라서 제안된 회로는 정상상태시 약 50% 시비율로 동작되므로 기존 위상천이 풀 브리지 컨버터의 문제점인 환류전류를 제거 할 수 있으며, 이를 통하여 도통 손실을 줄일 수 있다. 또한, 넓은 부하범위에서 영전압 스위칭 동작이 가능하며, 출력 전류 리플도 매우 작은 장점이 있다. 특히 순간정전시 능동 클램프 컨버터로 동작 모드가 변하여 50~100% 시비율로 동작되므로 넓은 입력전압범위에 대해 대응이 가능하다. 본 논문에서는 제안된 회로의 동작원리 및 PSIM simulation을 수행하였으며, 1.2kW급 시작품을 제작하여 제안된 회로의 타당성을 검증하였다.
The purpose of this study was to predict the failure or success of the Snatch-lifting trial as a consequence of the stand-up phase simulated in Kane's equation of motion that was effective for the dynamic analysis of multi-segment. This experiment was a case study in which one male athlete (age: 23yrs, height: 154.4cm, weight: 64.5kg) from K University was selected The system of a simulation included a multi-segment system that had one degree of freedom and one generalized coordinate for the shank segment angle. The reference frame was fixed by the Nonlinear Trans formation (NLT) method in order to set up a fixed Cartesian coordinate system in space. A weightlifter lifted a 90kg-barbell that was 75% of subject's maximum lifting capability (120kg). For this study, six cameras (Qualisys Proreflex MCU240s) and two force-plates (Kistler 9286AAs) were used for collecting data. The motion tracks of 11 land markers were attached on the major joints of the body and barbell. The sampling rates of cameras and force-plates were set up 100Hz and 1000Hz, respectively. Data were processed via the Qualisys Track manager (QTM) software. Landmark positions and force-plate amplitudes were simultaneously integrated by Qualisys system The coordinate data were filtered using a fourth-order Butterworth low pass filtering with an estimated optimum cut-off frequency of 9Hz calculated with Andrew & Yu's formula. The input data of the model were derived from experimental data processed in Matlab6.5 and the solution of a model made in Kane's method was solved in Matematica5.0. The conclusions were as follows; 1. The torque motor of the shank with 246Nm from this experiment could lift a maximum barbell weight (158.98kg) which was about 246 times as much as subject's body weight (64.5kg). 2. The torque motor with 166.5 Nm, simulated by angular displacement of the shank matched to the experimental result, could lift a maximum barbell weight (90kg) which was about 1.4 times as much as subject's body weight (64.5kg). 3. Comparing subject's maximum barbell weight (120kg) with a modeling maximum barbell weight (155.51kg) and with an experimental maximum barbell weight (90kg), the differences between these were about +35.7kg and -30kg. These results strongly suggest that if the maximum barbell weight is decided, coaches will be able to provide further knowledge and information to weightlifters for the performance improvement and then prevent injuries from training of weightlifters. It hopes to apply Kane's method to other sports skill as well as weightlifting to simulate its motion in the future study.
Guenot-Delahaie, Isabelle;Sercombe, Jerome;Helfer, Thomas;Goldbronn, Patrick;Federici, Eric;Jolu, Thomas Le;Parrot, Aurore;Delafoy, Christine;Bernaudat, Christian
Nuclear Engineering and Technology
/
제50권2호
/
pp.268-279
/
2018
The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.
After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.
본 논문은 저전압-고전류 사양을 갖는 전력변환 시스템에 적합한 고효율 인터리브드 방식의 위상천이 풀브릿지 컨버터를 제안한다. 제안하는 컨버터는 1차 측에 '3개의 스위치 브릿지와 2개의 트랜스포머', 2차 측에 '2개의 정류단'으로 구성되어 있다. 2개의 트랜스포머는 각각 동일한 크기의 전력변환을 담당하고, 서로가 위상 차이를 두고 에너지를 전달하는 특징을 갖는다. 이를 통해 기존의 인터리브드 방식의 위상천이 풀브릿지 컨버터 수준의 높은 시스템 안정성을 가지게 된다. 제안하는 컨버터는 기존 컨버터의 효율향상 한계로 작용하였던 lagging-leg 스위치의 하드스위칭 특성을 개선하기 위해 새로운 회로 구조와 제어기법을 적용하였다. 이를 통해 제안하는 컨버터는 기존 컨버터에 비해 하드스위칭 조건을 갖는 스위치의 수를 절반으로 줄였으며, 기존 컨버터에 비해 회로 구성에 사용되는 스위치의 수를 줄여 시스템의 복잡도를 개선하는 효과도 얻었다. 제안하는 컨버터의 특성을 확인하기 위해 본 논문에서는 저전압-고전류 특징을 갖는 3kW 서버용 전원장치 스펙을 이용하여 기존 컨버터와 제안하는 컨버터 시스템을 설계하였고, PSIM 시뮬레이션 툴을 활용하여 두 회로의 동작 특징을 비교하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.