• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.15-26
• /
• 2012

Government agencies including the national police agency have executed diverse efforts including continuous improvements of traffic facilities and operation methods, education, enforcements in order to improve traffic operation systems; nevertheless there have been continuous criticisms on irrationality in traffic signal and road facility operation. One of the reasons may be the lack of systematic preliminary evaluations on various alternatives. However, there was no appropriate tool to evaluate the mobility and safety of thus alternatives in a systematic way. Therefore, this study proposes the systematic use of microscopic traffic simulation models as a comprehensive evaluation tool. In addition, this study verified the potential of using a microscopic traffic simulation model using the case of operating an overlap phase on a shared-left-turn lane through a systematic way where the evaluation was conducted through data collection, building networks, calibrating microscopic simulation models, producing performance measures, evaluating mobility and safety, and so on. As a result, the operation of overlap phase on a shared-left-turn lane showed no big difference from other operation scenarios such as leading left-turn on exclusive left turn lane in terms of mobility. However the operation of overlap phase on a shared-left-turn lane decreased safety by increasing potential conflicts.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.545-554
• /
• 2017

Birnessite is one of the dominant Mn (oxyhydr)oxide phases commonly found in soil and deep ocean environments. It typically occurs as nano-sized and poorly crystalline aggregates in the natural environment. It is well known that birnessite participates in a wide variety of bio/geochemical reactions as a reactive mineral phase with structural defects, cation vacancies, and mixed valences of structural Mn. These various bio/geochemical reactions control not only the fate and transport of inorganic and organic substances in the environment, but also the formation of diverse Mn (oxyhydr)oxides through birnessite transformation. This review assessed and discussed about the phase transformation of birnessite under a wide range of environmental conditions and about the potential geochemical factors controlling the corresponding reactions in the literature. Birnessite transformation to other types of Mn (oxyhydr)oxides were affected by dissolved Mn(II), dissolved oxygen, solution pH, and co-existing cation (i.e., $Mg^{2+}$). However, there still have been many issues to be unraveled on the complex bio/geochemical processes involved in the phase transformation of birnessite. Future work on the detail mechanisms of birnessite transformation should be further investigated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.699-708
• /
• 2023

Nuclear power plants (NPPs) consider possible external events, including natural hazards, during the design phase to ensure safe operation. However, in recent years, due to the increasing probability of natural hazards exceeding the design, a careful review of extreme natural hazards and unforeseen external events during the design phase has become necessary. In this study, the objective was to screen potential extreme natural hazards at NPP sites in Korea. Initially, we investigated and analyzed the characteristics of NPP sites and the events caused by external hazards. Furthermore, we analyzed existing literature and research data to establish screening procedures and criteria that suit the actual conditions of domestic NPPs. Based on these criteria and data, we conducted qualitative screening for each NPP site and identified potential extreme natural hazards through quantitative screening and walkdown. As a result of the screening, in addition to internal flooding caused by heavy rain, wind pressure and extreme air pressure caused by extreme winds were screened as potential extreme natural hazards common to all sites. Additionally, at the Kori site, storm surge was selected as the most significant potential extreme natural hazard.

• Corrosion Science and Technology
• /
• v.13 no.3
• /
• pp.95-101
• /
• 2014

The pitting corrosion behaviors between the constituent phases in F53 super duplex stainless steel (SDSS) in acidified chloride environments were investigated using a critical pitting corrosion temperature test, a potentiodynamic anodic polarization test, and the microstructure analyses through a SEM-EDS and a SAM. As the solution annealing temperature decreased from $1150^{\circ}C$ to $1050^{\circ}C$, the ${\gamma}$-phase fraction increased whereas the ${\alpha}$-phase fraction decreased. The pitting potential and the critical pitting temperature increased with a decrease of solution annealing temperature, thereby increasing the resistance to pitting corrosion. The pitting corrosion of the SDSS was selectively initiated at the ${\alpha}$-phases because the PREN (pitting resistance equivalent number, PREN = %Cr+3.3%Mo+30%N) value of the ${\gamma}$-phase is much larger than that of the ${\alpha}$-phase, irrespective of the solution annealing temperature. The pitting corrosion was finally propagated from the ${\alpha}$-phase to the ${\gamma}$-phase. The decrease of solution annealing temperature enhanced the resistance to pitting corrosion greatly in acidified chloride environments due to a decrease of PREN difference between the ${\gamma}$-phase and the ${\alpha}$-phase, that is, a decrease of $PREN{\gamma}$ by dilution of N in ${\gamma}$-phase with an increase in the ${\gamma}$-phase volume fraction and an increase of $PREN{\alpha}$ by enrichment of Cr and Mo in the ${\alpha}$-phase with a decrease in the ${\alpha}$-phase volume fraction.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1015-1017
• /
• 2002

This is the study on static excitation system of synchronous generator of large capacity in new model, which was developed by KEPRI using triple redundant digital method, associate three bridges of thyristor phase controlled rectifier. This paper will discuss the design conception and the application results of system which includes the power control devices(thyristors, GTO) and power excitation potential transformer. The multi-paralleling thyristor bridge converters of N+1 method have firing circuit. The initial product manufactured by proposed design in the study is in commercial operation, completing installation and commissioning in 400MW Thermal Power Plant. The performance test is done in practical technique.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.14-19
• /
• 2012

We investigate the doublet and quartet potential energy surfaces associated with the gas-phase reaction between $Ti^+$ and $CF_3COCH_3$ for two plausible reaction pathways, $TiF_2^+$ and $TiO^+$ formation pathways by using the density functional theory (DFT) method. The molecular structures of intermediates and transition states involved in these reaction pathways are optimized at the DFT level by using the PBE0 functional. All transition states are identified by using the intrinsic reaction coordinate (IRC) method, and the resulting reaction coordinates describe how $Ti^+$ activates $CF_3COCH_3$ and produces $TiF_2^+$ and $TiO^+$ as products. On the basis of presented results, we propose the most favorable reaction pathway in the reaction between $Ti^+$ and $CF_3COCH_3$.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1243-1246
• /
• 1998

Three-dimensional(3-D) sound is a technique for generating or recreating sounds so they are perceived as emanating from locations in a three-dimensional space. Three dimensional sound has the potential of increasing the feeling of realism in music or movie soundtracks. Three-dimensional sound effects depend on psychoacoustic spectral and phase cues being presented in a reproduced signal. In this paper we propose an effective algorithm for the sound image expansion in television system using stereo image enhancement techniques. Compared to the other techniques of three-dimensional sound, the proposed algorithm use only two speakers to enhance the sound image expansion, while maintaining the original sound characteristics.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.126-131
• /
• 2001

This paper deals with implementation of inverter systems for DC power regeneration, which can regenerate the excessive DC power from DC bus line to AC supply in substations for traction systems. From the viewpoint of both power capacity and switching losses, a three-phase square-wave inverter system is adopted. To control the regenerated power, the magnitude and phase of fundamental output voltages should be appropriately controlled in spite of the variation of input DC voltage. Inverters are operated with modified a-conduction mode to fix the potential of each arm. The overall system consists of the line-to-line voltage and line current sensors, an actual power calculator using d-q transformation method, a complex power controller with PI control scheme, a gating signal generator for modified $\alpha-conduction\;mode\;with\;\delta\;and\;\alpha$, a DPLL for frequency followup, and power circuit.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.712_713
• /
• 2009

This paper deals with the analysis on eddy current looses of high speed permanent magnet synchronous motor (PMSM) for turbo compressor according to voltage source driving. This paper presents analytical procedures for calculation of the eddy current losses using Poynting theorem. On the basis of the magnetic vector potential and a two-dimensional (2-D) cylindrical coordinate system, this paper derived analytical solutions of the eddy current looses using phase current analysis. The eddy current losses of each harmonic obtained by fast Fourier transform (FFT) analysis of phase current are with results obtained from finite-element method (FEM).