• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.231-239
• /
• 1998

This paper presents the dynamic analysis and control loop design of a zero voltage switching full bridge (ZVS-FB) PWM DC/DC converter. The small-signal model is derived incorporating the effects of phase shift control and the utilization of transformer leakage inductance and power FET junction capacitance to achieve zero voltage resonant switching. These effects are modeled by introducing additional feedforward and feedback terms for duty cycle modulation. Based on the results of the small-signal analysis, the control loop is designed using a simple two-pole one-zero compensation circuit. To show the validity of the design procedures, the small signal analysis of the closed loop system is carried out and the potential of the zero voltage switching and the superiority of the dynamic characteristics are verified through the experiment with a 2 kW prototype converter.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.488-493
• /
• 2010

Geopolymer is a term covering a class of synthetic aluminosilicate materials with potential use in a number of areas, but mainly as a replacement for Portland cement. In this study, geopolymers with fly ash and meta kaolin were prepared using KOH as an alkali activator and water glass. The effect of water glass on the microstructures and the compressive strength of the geopolymer was investigated. As the amount of water glass increased, the dissolved inorganic binder particles in the geopolymers increased due to polymerization, resulting in a dense microstructure. The meta kaolin-based geopolymer showed a better extent of polymerization and densification than that of the fly ash-based geopolymer. XRD data also suggested that polymerization in meta kaolin-based geopolymers should be active resulting in the formation of an amorphous phase with an increasing amount of water glass. The compressive strength of the geopolymer was also dependent on the amount of water glass. The compressive strength of the geopolymers from both fly ash and meta kaolin increased with an increasing amount of water glass because water glass improved the extent of polymerization of the inorganic binder and resulted in a dense microstructure. However, the addition of water glass to the geopolymer did not seem to be effective for the improvement of compressive strength because the meta kaolin-based geopolymer mainly consisted of a clay component. For this reason, the fly ash-based geopolymer showed a higher value of compressive strength than the meta-kaolin geopolymer.

• Mycobiology
• /
• v.44 no.3
• /
• pp.162-170
• /
• 2016

In this paper, we demonstrate the ability of Arabidopsis thaliana to detect different mixtures of volatile organic compounds (VOCs) emitted by the common indoor fungus, Aspergillus versicolor, and demonstrate the potential usage of the plant as a bioindicator to monitor fungal VOCs in indoor air. We evaluated the volatile production of Aspergillus versicolor strains SRRC 108 (NRRL 3449) and SRRC 2559 (ATCC 32662) grown on nutrient rich fungal medium, and grown under conditions to mimic the substrate encountered in the built environment where fungi would typically grow indoors (moist wallboard and ceiling tiles). Using headspace solid phase microextraction/gas chromatography-mass spectrometry, we analyzed VOC profiles of the two strains. The most abundant compound produced by both strains on all three media was 1-octen-3-ol. Strain SRRC 2559 made several terpenes not detected from strain SRRC 108. Using a split-plate bioassay, we grew Arabidopsis thaliana in a shared atmosphere with VOCs from the two strains of Aspergillus versicolor grown on yeast extract sucrose medium. The VOCs emitted by SRRC 2559 had an adverse impact on seed germination and plant growth. Chemical standards of individual VOCs from the Aspergillus versicolor mixture (2-methyl-1-butanol, 3-methyl-1-butanol, 1-octen-3-ol, limonene, and ${\beta}-farnesene$), and ${\beta}-caryophyllene$ were tested one by one in seed germination and vegetative plant growth assays. The most inhibitory compound to both seed germination and plant growth was 1-octen-3-ol. Our data suggest that Arabidopsis is a useful model for monitoring indoor air quality as it is sensitive to naturally emitted fungal volatile mixtures as well as to chemical standards of individual compounds, and it exhibits relatively quick concentration- and duration-dependent responses.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.123-132
• /
• 2020

In contemporary times, there is an increasing demand for a dedicated healthcare environment, all over the world. The main motivation for this demand is the level of awareness manifested by the users and reflected on their expectations. Therefore new research strategies and design actions are investigated in order to answer to the users' needs and to provide objective design tools for the specialist. This study continues a series of previous developments of the Healthcare Environment Color Index that should be used for public facilities in Korea and abroad. The cross-cultural approach is a new opportunity for exchanging know-how and for testing and calibrating the perception of the users on the color index. The gathering of results was made based on the online survey provided in this phase in English version for the Romanian users. The survey was intended as an objective mean of research and an efficient way of disseminating information on the subject thus contributing to increasing the level of awareness of the users. A total of 86 Romanian and 89 Koreans with valid answers took part in the survey. Comparative visualizations of the results showed significant similarities concerning the patterns of color preferences but also cultural and emotional differences. As a result both categories of users proved to be aware of the relation between healthcare environment color and its effects on health. They also showed a common understanding on the potential of the color index. As a result the most appealing colors to be applied to the healthcare environment were the series G and B, and the most effective ones were proved to be the ranges of high lightness and low saturation but also the medium high lightness and medium saturation. Both the similarities and the differences of choice between Romanians and Koreans show that cultural and emotional differences of color recognition are important and that should be taken into consideration in design, in order to generate an inclusive and efficient healthcare environment.

• Journal of Environmental Health Sciences
• /
• v.39 no.6
• /
• pp.505-512
• /
• 2013

Objectives: Ultraviolet (UV) radiation may cause skin cancer, photo-ageing, erythema, and sunburn. Benzophenone (BP) is commonly used to protect skin from UV radiation. In Korea, sunscreen, sunblock, socalled 'blemish balm' (BB) and 'color correcting' (CC) creams, and foundation may contain from 0.5 to 5% benzophenone in order to protect skin from UV radiation. The purpose of this study is to understand the levels of benzophenone derivatives in urine among a group of university students and identify the contribution of cosmetics use. Methods: Forty volunteers (20 women and 20 men) were asked about skin type, frequency of use of cosmetics, and recognition of related health effects, etc. in a survey. Subjects were divided into several subgroups and were compared for concentration of benzophenone-1 (BP-1) and benzophenone-3 (BP-3). Their urine was pretreated with enzyme hydrolysis and solid phase extraction. Determinations of BP-1 and BP-3 in the urine were made with LC-MS/MS. Results: Among the study subjects, 82.5% used basic cosmetics at least once per day, and 77.5% used sunscreens at least once per day. The concentrations of BP-1 and BP-3 of the males were 4.36 ng/mL and 9.16 ng/mL, respectively. Those of the females were 3.98 ng/mL and 5.07 ng/mL, respectively. The use of cosmetics was positively related to urinary benzophenone levels. Conclusions: BP-1 and BP-3 were widely detected among the university students. Cosmetic use was identified as a potential source. Implications of such exposure deserve further investigation.

• Journal of Periodontal and Implant Science
• /
• v.42 no.4
• /
• pp.113-118
• /
• 2012

Purpose: The aim of this study was to investigate the effects of synthetic fibronectin (FN) fragments, including fibrin binding sites from amino-terminal FN fragments containing type I repeats 1 to 5, on osteoblast-like cell activity. Methods: Oligopeptides ranging from 9 to 20 amino acids, designated FF1, FF3, and FF5, were synthesized by a solid-phase peptide synthesizing system, and we investigated the effects of these peptides on cell attachment and extent of mineralization using confocal microscopy, 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays, and Alizarin red S staining. Results: FF3 and FF5 peptides increased the number of attached human osteoblastic cells, and FF3 administration led to prominent cell spreading. Mineralization was increased in FF3 and FF5 compared to FF1 and the untreated control. Conclusions: Taken together, it can be concluded that the fibrin-binding oligopeptides FF3 and FF5 enhanced cell attachment and mineralization on osteoblast-like cells. These results indicate that FF3 and FF5 have the potential to increase osteoblast-like cell activity. Performing an in vivo study may provide further possibilities for surface modification of biomimetic peptides to enhance osteogenesis, thus improving the regeneration of destroyed alveolar bone.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.5
• /
• pp.381-386
• /
• 2017

PURPOSE. To integrate extra-oral facial scanning information with CAD/CAM complete dentures to immediately rehabilitate terminal dentition. MATERIALS AND METHODS. Ten patients with terminal dentition scheduled for total extraction and immediate denture placement were recruited for this study. The patients were submitted to a facial scanning procedure using the in-office PritiMirror scanner with bite registration records in-situ. Definitive stone cast models and bite records were subsequently submitted to a lab scanning procedure using the lab scanner (iSeries DWOS; Dental Wings). The scanned models were used to create a virtual teeth setup of a complete denture. Using the intra-oral bite records as a reference, the virtual setup was incorporated in the facial scan thereby facilitating a virtual clinical evaluation (teeth try-in) phase. After applying necessary adjustments, the virtual setup was submitted to a CAM procedure where a 5-axis industrial milling machine (M7 CNC; Darton AG General) was used to fabricate a full-milled PMMA immediate provisional prosthesis. RESULTS. Total extractions were performed, the dentures were immediately inserted, and subjective clinical fit was evaluated. The immediate provisional prostheses were inserted and clinical fit, occlusion/articulation, and esthetics were subjectively assessed; the results were deemed satisfactory. All provisional prostheses remained three months in function with no notable technical complications. CONCLUSION. Ten patients with terminal dentition were treated using a complete digital approach to fabricate complete dentures using CAD/CAM technology. The proposed technique has the potential to accelerate the rehabilitation procedure starting from immediate denture to final implant-supported prosthesis leading to more predictable functional and aesthetics outcomes.

• KSBB Journal
• /
• v.26 no.6
• /
• pp.483-490
• /
• 2011

Bioactive peptides (BAP) showed excellent cosmetic activity than bio-materials such as caffeic acid (CA), gallic acid (GA), and nicotinic acid (NA). Caffeoyl tripeptide-1 (CT-1) is a BAP that is stabilized with Gly-His-Lys (GHK) tripeptide and CA by using Fmoc solid phase peptide synthesis. Digalloyl tetrapeptide-19 (DT-19) is stabilized by combining Lys-Glu-Cys-Gly with GA and nicotinoyl tripeptide-1 (NT-1) is synthesized by GHK and NA. According to experiments, CT-1 has an excellent anti-oxidant function even with a very small amount of 10 ppm CT-1. DT-19's tyrosinase inhibition activity has the better effect of about 28.57% in 0.01% and 33.33% in 0.005% of concentration and about 7.89% in 0.001% concentration than vitamin-C. In addition, NT-1 is safer than the NA. Almost BAPs like pal-KTTKS, acetyl hexapeptide, and copper tripeptide-1 have the anti-wrinkle effect while DT-19 and NT-1 are applicable for potential BAPs focused on the whitening effect. The three kinds of BAPs like CT-1, DT-19, and NT-1 consisting of amino acids are safe to the skin, and have more excellent stability than bio-materials which are found to be unstable and cause skin irritation. Due to the high biological activity of BAP in the field of skin care, its utilization will increase constantly.

• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.710-714
• /
• 2007

LSGM$(La_{0.8}Sr_{0.2}Ga_{0.8}Mg_{0.2}O_{3-{\delta}})$ is the very promising electrolyte material for lower-temperature operation of SOFCs, especially when realized in anode-supported cells. But it is notorious for reacting with other cell components and resulting in the highly resistive reaction phases detrimental to cell performance. LDC$(La_{0.4}Ce_{0.6}O_{1.8})$, which is known to keep the interfacial stability between LSGM electrolyte and anode, was adopted in the anode-supported cell, and its effect on the interfacial reactivity and electrochemical performance of the cell was investigated. No severe interfacial reaction and corresponding resistive secondary phase was found in the cell with LDC buffer layer, and this is due to its ability to sustain the La chemical potential in LSGM. The cell exhibited the open circuit voltage of 0.64V, the maximum power density of 223 $mW/cm^2$, and the ohmic resistance of $0.17{\Omega}cm^2$ at $700^{\circ}C$. These values were much improved compared with those from the cell without any buffer layer, which implies that formation of the resistive reaction phases in LSGM and then deterioration of the cell performance is resulted mainly from the La diffusion from LSGM electrolyte to anode.