• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.113-116
• /
• 2000

Phase noise of oscillator gives the performance degradation significantly when a high carrier frequency and low transmission rate are used. The BER(Bit Error Rates) degradation of QPSK(Quadrature Phase Shift Keying) transmission is analyzed with the oscillator phase noise level specified in downstream physical interface of LMDS(Local Multipoint Distribution Services) which is described in DAVIC(Digital Audio Visual Council). The model used for the phase noise is a power-law model. We also investigated the effects of the various transmission rates on system performance. For the transmission rate below 0.5 Mbps, the BER performance is severely degraded and we verified that the transmission rate, 20 Mbps, is adequate for the downstream of LMDS systems.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.865-870
• /
• 2001

이 논문에서는, PLL주파수 합성기의 VCO로부터의 위상잡음이 64 QAM 시스템 성능에 미치는 영향을 분석하려 한다. 발진기에서 발생하는 위상잡음을 실제와 유사하게 예측하기 위해 발진기의 입력 충격 전류가 소신호일 때를 가정하여 선형 시변(linear time-varying : LTV) 모형을 고려하였으며 64 QAM 시스템에서 위상잡음이 복조부에서 검출과정을 거칠 때 위상잡음이 없는 백색정규잡음 환경에서의 BER과 비교하여 어느 정도 시스템 성능을 떨어뜨리는지를 분석한다.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.467-470
• /
• 2013

We propose a blind feedforward phase noise mitigation method in the time-domain for a coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. By exploiting the redundancy of the cyclic prefix (CP), the proposed scheme acquires the overall phase noise difference information during an OFDM block and attempts to mitigate the phase noise in the time domain using a linear approximation. The proposed algorithm mitigates common phase error (CPE) and inter-carrier-interference (ICI) due to phase noise simultaneously, improving the system performance, especially when decision-directed equalizers are used. The simulation results demonstrate the effectiveness of the proposed feedforward phase noise mitigation approach in time domain.

• ETRI Journal
• /
• 제24권2호
• /
• pp.161-171
• /
• 2002

This paper proposes a novel decision feedback differential phase detection (DF-DPD) for M-ary DPSK. A conventional differential phase detection method for M-ary Differential Phase Shift Keying (DPSK) can simplify the receiver architecture. However, it possesses a poorer bit error rate (BER) performance than coherent detection because of the prior noisy phase sample. Multiple-symbol differential detection methods, such as maximum likelihood differential phase detection, Viterbi-DPD, and DF-DPD using L-1 previous detected symbols, have attempted to improve BER performance. As the detection length, L, increases, the BER performance of the DF-DPD improves but the complexity of the architecture increases dramatically. This paper proposes a simplified DF-DPD architecture replacing the conventional delay and additional architecture with an accumulator. The proposed architecture also improves BER performance by minimizing the current differential phase noise through the accumulation of previous differential phase noise samples. The simulation results show that the BER performance of the proposed architecture approaches that of a coherent detection with differential decoding.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.217-221
• /
• 2000

본 논문에서는, PLL 주파수 합성기의 VCO로부터의 위상잡음이 64QAM 시스템 성능에 미치는 영향을 분석한다. 오실레이터에서 발생하는 위상잡음을 실제와 유사하게 예측하기 위해 오실레이터 의 입력 임펄스 전류가 소신호 일때를 가정하여 LTV(선형 시변) 모델을 고려하였으며 64QAM 시스템에서 위상잡음이 복조부에서 검출과정을 거칠 때 위상잡음이 없는 AWGN 환경에서의 BER과 비교하여 어느 정도의 시스템 성능 저하를 야기하는지에 대해 분석한다

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1780-1786
• /
• 2005

디지털 신호의 전송 성능은 전송 시스템의 위상 에러에 지배적으로 영향을 받고 있으며, 위상 에러는 랜덤 특성을 갖는 위상 잡음과 도플러에 의한 추적 위상 에러에 의해 발생된다. 도플러 현상이 나타나는 움직임을 갖는 이동형 위성통신 시스템에서는 랜덤 위상 잡음과 추적 위상 오차에 의한 전송 신호의 영향을 해석하여 이동형 위성통신 시스템에 적합한 시스템 요구 위상 잡음 스펙트럼을 설계해야 한다. 본 논문에서는 이동형 양방향 위성통신 시스템의 비대칭 이동 서비스에 대한 도플러 영향과 위상 에러를 해석하여 요구되는 전송 시스템의 위상 잡음 스펙트럼을 설계하고, 움직임을 갖는 단말국의 도플러 영향을 최소화하는 전송서비스를 해석한다. 제안한 위상 잡음 스펙트럼은 요구 전송 시스템에 대한 주파수 발생 부 주파수 특성으로 설계할 수 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.565-571
• /
• 2000

SRM has been applied to many commercial applications that require economical advantages and high performance abilities. But it has some drawbacks such as acoustic noise due to the abrupt change of mmf level when commutation. The abrupt change of a phase excitation produces mechanical stresses and it results in torque ripple and noise. This paper deals with an analysis of vibration and noise in SRM drive. Several types of excitation method are taken into account. The 1-phase and 2-phase excitation technique of short-pitch winding 2-phase excitation technique of full-pitch winding are tested. The acoustic noise is reduced remarkably through the sequential phase excitation in the 2-phase excitation. It is because that the scheme reduces abrupt change of excitation level by distributed balanced excitation with free-wheeling during commutation.

• 한국정보통신학회논문지
• /
• 제20권10호
• /
• pp.1831-1836
• /
• 2016

본 논문에서는 차세대 위성통신 규격인 DVB-RCS2 기반 VSAT 단말 시스템의 송수신부 위상잡음 스펙트럼 분포 특성을 분석한다. VSAT 순방향 링크는 DVB-S2 ACM 기반 APSK 고차 전송모드를 사용하며, 역방향 링크는 DVB-RCS2 기반 PSK 및 QAM 계열의 고차 전송 모드를 사용한다. 고차 전송 모드를 사용함에 따라 위상잡음에 의한 영향이 나타나며, 위성전송시스템 신호발생부의 위상잡음 특성에 따라 전송 성능의 열화가 지배적으로 나타난다. 위성전송 환경에 따라 가변적으로 전송 데이터 율와 전송 모드를 가변하는 전송방식을 고려하여 요구 위상잡음 특성을 분석하고 차세대 VSAT 전송 파라미터를 수용하는 전송시스템 신호발생부의 위상잡음 특성을 제시한다.

• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.191-193
• /
• 2016

This paper proposes a voltage-controlled oscillator (VCO) that has broadband turning and low-level of phase noise characteristics. Due to the micro-strip line resonant circuit with a low Q value, which is applied to the broadband tuning range, the depreciated phase noise performance is compensated by restraining the harmonics of the oscillating frequency. The VCO was designed according to the proposed structure as well as the conventional structure, and the superiority of the proposed structure was verified through its simulation, fabrication, and measurement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2023

The objective of this study is to evaluate the airborne sound insulation performance between housing units and community facilities during the construction phase. Community facilities adjacent to housing units can lead to noise problems, hence it is necessary to minimize noise transmission during the design phase. However, flanking noise transmitted through gaps of structures, windows, pipes, and other openings may result in substandard sound insulation performance falling below the design standards. Therefore, It is crucial to measure airborne sound insulation in the field during the construction phase. The measurement was conducted using the survey method for the field measurement of the airborne sound insulation in accordance with KS F ISO 10052:2021. Although the noise standards caused by community facilities in apartment complexes are not specified in current laws and regulations, desired noise level was set based on international guidelines for indoor noise. First, the level of noise generated in community facilities was estimated, and then the sound insulation performance was evaluated to determine whether the desired noise level was achieved.