• 제목/요약/키워드: Phase identification

검색결과 690건 처리시간 0.032초

Crack propagation and deviation in bi-materials under thermo-mechanical loading

  • Chama, Mourad;Boutabout, Benali;Lousdad, Abdelkader;Bensmain, Wafa;Bouiadjra, Bel Abbes Bachir
    • Structural Engineering and Mechanics
    • /
    • 제50권4호
    • /
    • pp.441-457
    • /
    • 2014
  • This paper presents a finite element based numerical model to solve two dimensional bi-material problems. A bi-material beam consisting of two phase materials ceramic and metal is modelled by finite element method. The beam is subjected simultaneously to mechanical and thermal loadings. The main objective of this study is the analysis of crack deviation located in the brittle material near the interface. The effect of temperature gradient, the residual stresses and applied loads on crack initiation, propagation and deviation are examined and highlighted.

황해상 덕적도 PM2.5오염원의 확인 (Source Identification of PM2.5 at the Tokchok Island on the Yellow Sea)

  • 윤용석;배귀남;김동술;황인조;이승복;문길주
    • 한국대기환경학회지
    • /
    • 제18권4호
    • /
    • pp.317-325
    • /
    • 2002
  • An air pollution monitoring station has been operated at Tokchok Island since April 1999 to characterize the background atmosphere in the vicinity of the Yellow Sea. In this study, eight chemical species in PM$_{2.5}$ and three gaseous species were analyzed. A total of 53 samples were collected for the analysis of PM$_{2.5}$ and gaseous species from April, 1999 to April, 2001. The overall mean mass concentration of PM$_{2.5}$ was 20.8 $\mu\textrm{g}$/㎥ and the eight soluble ionic species accounted for about 46.8% of PM$_{2.5}$ mass. Approximately 80% of samples appeared to experience the chloride loss effect. Air pollutant sources of PM$_{2.5}$ measured at Tokchok Island were qualitatively identified by the principal component analysis. It was found that five principal components are secondary aerosol, soil, incineration, phase change of nitrate, and ocean.and ocean.

25wt% A1이 첨가된 구상흑연주철의 용손 거동 (Melt-out Behaviour of 25wt% Al-Alloyed Ductile Iron)

  • 권기현;이종훈;유위도
    • 연구논문집
    • /
    • 통권34호
    • /
    • pp.139-146
    • /
    • 2004
  • In this study, effect of temperature and time on melt-out of 25wt% Al-alloyed ductile iron has been investigated. The oxidation tests were carried out in a tube furnace at $800^\circC$, $930^\circC$, and $1000^\circC$ for lh, 5h, 10h, 50h. The microstructure, microhardness, and $Al_2O_3$ layer of oxidation-treated 25wt% Al-alloyed ductile iron samples (10 x 10 x 10 mm) were investigated. Phase identification was performed by X-ray diffraction(XRD) and EDS. The oxidation-treated 25wt% Al-alloyed ductile iron samples at $930^\circC$ for lh, 5h, 10h and KS GCD 500 were used for melt-out test in an Al alloy melt. The melt-out test results showed that oxidation tested sample at $930^\circC$ for 5h which on the whole forms $2-3\mum$ $Al_2O_3$ layer showed lowest melt-out depth. It was observed showed that appropriate Al203 layer can affect melt-out behaviors.

  • PDF

모바일 환경에서 정합 필터를 이용한 얼굴 식별 (Face identification with frequency domain matched filtering in mobile environments)

  • 이동수;우용현;염석원;김신환
    • 한국멀티미디어학회:학술대회논문집
    • /
    • 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
    • /
    • pp.4-5
    • /
    • 2012
  • 원거리에서의 얼굴 식별은 낮은 영상 해상도를 비롯하여 블러와 잡음으로 인한 어려움이 크다. 더욱이 모바일 장치에서 실시간 처리를 하기 위하여 느린 수행속도와 제한된 메모리 등 모바일 계산환경을 필히 고려하여야 한다. 본 논문은 모바일 환경에서 주파수 영역의 정합 필터를 이용한 얼굴 식별 방법을 제안한다. 얼굴 식별은 선형(linear) 및 위상(phase-only) 필터, 순차적인 검증 단계를 이용하여 수행된다. 얼굴 후보 윈도우 영역은 선형 필터와 위상 필터를 수행하여 검출하고 순차적인 검증 단계는 피부색 테스트와 경계 마스크 필터링 테스트로 구성한다. 제안된 방법은 Android 플랫폼에서 Java을 이용하여 모바일 폰에서 개발하였다. 예비실험 결과는 모바일 환경에서 얼굴 식별이 실시간으로 성공적으로 수행될 수 있음을 보인다.

  • PDF

램프 인식 기능을 가진 HID 전자식 안정기의 구현 (HID Electronic Ballast with Auto-Switching of MH and HPS Lamps)

  • 이치환;최남열
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 전력전자학술대회 논문집(2)
    • /
    • pp.887-890
    • /
    • 2004
  • This paper presents a microprocessor controlled electronic ballast for HID lamps, which gives automatic switching between MH and HPS lamps. Lamp identification is carried out by checking variation of lamp impedance at warm-up phase. Direct spread spectrum is done by applying 1 kHz triangular wave for removing acoustic resonance. This frequency modulation of 1 kHz gives also low EMI level. The microprocessor controls the voltage of DC-bus, the voltage of ignition pulses, the power of output. A 250W electronic ballast is implemented with ATmega16 CPU.

  • PDF

복진정제 및 수면제 유발 사건수면 (Sedative Hypnotics Induced Parasomnias)

  • 이유진
    • 수면정신생리
    • /
    • 제19권1호
    • /
    • pp.18-21
    • /
    • 2012
  • Parasomnias induced by hypnosedatives are rare but serious side effect. Such parasomnias have not been reported with all hypnosedatives. However, frequent use of hypnosedatives, particularly nonbenzodiazepine receptor agonists is associated with parasomnias. Associated symptoms are sleep eating, sleepwalking with object manipulation, sleep conversations, sleep driving, sleep sex and sleep shopping etc. Mechanisms include high affinity for $GABA_A$ receptor, interruption of the consolidation phase of memory formation by drug, pharmacokinetic or pharmacodynamic drug-drug interaction and concomitant administration with alcohol. Managements for parasomnias induced by hypnosedatives involve stopping medication, switch to other medications or nonpharmacological treatment, lowest effective dose of NBRAs (Non-Benzodiazepine Receptor Agonists), taking into consideration drug-drug interactions, identification and treatment of underlying disease states.

LRT 신호시스템에서 성능검증을 위한 시험방법 분석 (Testing method analysis for performance verification in Light Rail Transit signalling system)

  • 조봉관;황현철;이호용;류상환
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 춘계학술대회 논문집
    • /
    • pp.1722-1728
    • /
    • 2007
  • This study analysed testing method for performance verification in the phase of signalling system development for application in the Light Rail Transit(LRT). The main focus in this study therefore includes development of vehicle location detection system by first GPS and analysis of performance verification method by field testing. The comprehensive testing method has been analysed for the signalling system for LRT high speed operation. The signalling system for LRT high speed operation deals with vehicle location identification through vehicle location information using the second GPS and decision for whether the high speed proceed signal and departure inhibition output is feasible or not and for signalling output to the corresponding vehicle.

  • PDF

Identification and Analysis of External Event Combinations for Hanhikivi 1 PRA

  • Helander, Juho
    • Nuclear Engineering and Technology
    • /
    • 제49권2호
    • /
    • pp.380-386
    • /
    • 2017
  • Fennovoima's nuclear power plant, Hanhikivi 1, $Pyh{\ddot{a}}joki$, Finland, is currently in design phase, and its construction is scheduled to begin in 2018 and electricity production in 2024. The objective of this paper is to produce a preliminary list of safety-significant external event combinations including preliminary probability estimates, to be used in the probabilistic risk assessment of Hanhikivi 1 plant. Starting from the list of relevant single events, the relevant event combinations are identified based on seasonal variation, preconditions related to different events, and dependencies (fundamental and cascade type) between events. Using this method yields 30 relevant event combinations of two events for the Hanhikivi site. The preliminary probability of each combination is evaluated, and event combinations with extremely low probability are excluded from further analysis. Event combinations of three or more events are identified by adding possible events to the remaining combinations of two events. Finally, 10 relevant combinations of two events and three relevant combinations of three events remain. The results shall be considered preliminary and will be updated after evaluating more detailed effects of different events on plant safety.

배관 용접부의 상시감시를 위한 유도초음파 모드 규명 (Identification of Guided-wave Modes for on-line monitering in the pipe weldment)

  • 박익근;김태형;이철구;김용권;박태성;이진혁
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2006년도 춘계 학술대회 개요집
    • /
    • pp.307-309
    • /
    • 2006
  • For efficient NDE of pipes, essential components of power plant facilities, ultrasonic guided waves were generated and received applying an air-coupled transducer and comb one as non-contact technology, Mode generation and selection were predicted based on theoretical dispersive curve and the element spaceof a comb transducer. In addition, a receiving angle of the air-coupled transducer was determined to acquire the predicted modes by theoretical phase velocity of each mode. Theoretical dispersive curve was compared with the results of the time-frequency spectroscopes based on the wavelet transform and 2D-FFT to identify the characteristics of the received mode. The received modes show a good agreement with the predicted ones.

  • PDF

원자력발전소의 안전성 및 신뢰도 평가 (Safety and Reliability Assessment for Nuclear Power Plants)

  • 정원대;황미정
    • 한국안전학회지
    • /
    • 제12권4호
    • /
    • pp.143-152
    • /
    • 1997
  • Probabilistic Safety Assessment(PSA) is an engineering analysis of the possible contributors to the risk from a nuclear power plant. It consist of three phases named as Level 1, 2 and 3. Level 1 PSA mainly focused in this paper is the phase of system analysis which includes the development of accident scenarios and the frequency estimation of each scenario. It covers also the system reliability analysis, component data analysis, and human reliability analysis. PSA have become a standard tool in safety evaluation of nuclear power plants. The main benefit of PSA is to provide insights into plant design, performance and environmental impacts, including the identification of dominant risk contributors and the comparison of options for reducing risk.

  • PDF