• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1861-1868
• /
• 2008

In this paper, Passive Telemerty RF Sensor System using Unscented Kalman Filter algorithm(UKF) is proposed. General Passive Telemerty RF Sensor System means that it should be "wireless", "implantable" and "batterless". Conventional Passive Telemerty RF Sensor System adopts Integrated Circuit type, but there are defects like complexity of structure and limit of large power consumption in some cases. In order to overcome these kinds of faults, Passive Telemetry RF Sensor System based on inductive coupling principle is proposed in this paper. Because passive components R, L, C have stray parameters in the range of high frequency such as about 200[KHz] used in this paper, Passive Telemetry RF Sensor System considering stray parameters has to be derived for accurate model identification. Proposed Passive Telemetry RF Sensor System is simple because it consists of R, L and C and measures the change of environment like pressure and humidity in the type of capacitive value. This system adopted UKF algorithm for estimation of this capacitive parameter included in nonlinear system like Passive Telemetry RF Sensor System. For the purpose of obtaining learning data pairs for UKF Algorithm, Phase Difference Detector and Amplitude Detector are proposed respectively which make it possible to get amplitude and phase between input and output voltage. Finally, it is verified that capacitive parameter of proposed Passive Telemetry RF Sensor System using UKF algorithm can be estimated in noisy environment efficiently.

• Computers and Concrete
• /
• v.15 no.5
• /
• pp.735-758
• /
• 2015

This work deals with unilateral effect of quasi-brittle materials, such as concrete. For this propose, a two-dimensional meso-scale model is presented. The material is considered as a three-phase material consisting of interface zone, matrix and inclusions - each constituent modeled by an appropriate constitutive model. The Representative Volume Element (RVE) consists of inclusions idealized as circular shapes randomly placed into the specimen. The interface zone is modeled by means of cohesive contact finite elements developed here in order to capture the effects of phase debonding and interface crack closure/opening. As an initial approximation, the inclusion is modeled as linear elastic as well as the matrix. Our main goal here is to show a computational homogenization-based approach as an alternative to complex macroscopic constitutive models for the mechanical behavior of the quasi-brittle materials using a finite element procedure within a purely kinematical multi-scale framework. A set of numerical examples, involving the microcracking processes, is provided. It illustrates the performance of the proposed model. In summary, the proposed homogenization-based model is found to be a suitable tool for the identification of macroscopic mechanical behavior of quasi-brittle materials dealing with unilateral effect.

• Clinical and Experimental Reproductive Medicine
• /
• v.16 no.1
• /
• pp.35-40
• /
• 1989

In order to study the follicular atretic mechanism in mammalian ovary, the relationship between pyknotic index (PI) of granulosa cells and the steroid concentrations in the follicular fluid of atretic follicle was investigated. Follicles were isolated from porcine ovary according to their sizes and the reproductive phases. Steroid concentrations were quantified by high-performance liquid chromatography. As PI increased, the concentration of progesterone was significantly increased(p<0.05), whereas testosterone and estradiol showed no significant changes in their concentration. As follicular size was increased, PI of follicular GC in the luteal phase was increased significantly(p<0.05) and the molar ratio of progesterone to testosterone was increased in the follicles of follicular phase. It can be concluded that progesterone accumulated in the follicular fluid as atresia of the follicles was progressed, and that PI of granulosa cells could be used as one of convenient and pratical criteria for the identification of follicular atresia.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1125-1130
• /
• 2015

In this paper, a method to identify components per unit task system is expressed with node, module, and interface. We define security subject per unit task system and explain node, module, and interface per component. According to the defined security standard in design phase, we also perform to design and elaborate security attributes for node and module as identified security subjects in their defined tables. And then we describe the composition standard for security attribute design with some examples, after classifying it into security subject, access subject, access control area, identification or verification area, and encryption.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1
• /
• pp.5-13
• /
• 1992

Since power spectrum has no information about the phase of a signal, the power spectral analysis technique can not be used to interpret the phase coherency of the signal produced by some nonlinear process. In this case, third-order spectrum, the so called bispectrum, is very useful in analyzing such signals. some typical computer simulation results are shown in order to represent the usefulness of the bispectrum, and the bispectra of the measured acoustic signals of three vehicles are shown in order to use to identify the sources of those signals.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.43-50
• /
• 1996

A series of domestic natural zeolites were investigated to identify the phase and to study the capability of $NH_4{^+}$-ion removal from solution system. It was proved that the natural zeolite from Young-II bay area was thermally unstable zeolite, heulandite by XRD and FT-IR analyses. In addition, the heulandite exchanged by $K^+$ ion showed the highest thermal stability upon heat-treatments. However, the best capability of removing $NH_4{^+}$-ion from the solution system was the non-exchanged zeolite.

• Journal of muscle and joint health
• /
• v.23 no.3
• /
• pp.159-168
• /
• 2016

Purpose: The purpose of this study was to identify the factors influencing health-related quality of life (HRQOL) of patients with chronic obstructive pulmonary disease (COPD). Methods: A sample of 108 Patients diagnosed with COPD was recruited from outpatients, at a university hospital. Data were collected from February to April in 2016 using the St. George's Respiratory Questionnaire, the Hospital Anxiety-Depression Scale, and the COPD Self-efficacy scale. Results: The average score of HRQOL was 47.56 in patients with COPD. Results of the regression analysis showed that dyspnea phase (${\beta}$=.34, p<.001) and presence or absence of oxygen (${\beta}$=.20, p=.009), anxiety (${\beta}$=.29, p<.001), $FEV_1$ % predicted (${\beta}$=-.15, p=.014) were statistically significant in patients' HRQOL. Conclusion: The research findings show that dyspnea phase and anxiety among psychological factors were the most powerful factors that explain the HRQOL of COPD patients when the demographic and disease characteristics were controlled. Identification of quality of life-related factors should be used to inform targeted interventions, in order to improve HRQOL and help patients' cope.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.93-100
• /
• 1993

With increasing technology, requirement to car noise and related dynamics are getting competitive keypoint. Unfortunately, vibro - acoustic behavior of a car is nowadays only possible after development of prototypes. But, obviously, in the Area of Research, many of Industrials, Universities and research centers try to codevelop the design tools to predict the vibro-acoustic behaviors. At this stage, it is more realistic to represent the existing technologies in order for the engineer to get their own know-how to design and to Integrate existing techniques, to setup their test facility, and to develope some tools with which they can successfully predict noise levels of car in the design phase. Moreover, most of the theories which will be represented in this paper can be used in the design phase. At any way, finding the cause of trouble shooting is more urgent than the design of a car to the test engineer. In this paper, transfer path analysis, noise source identification, and the key test method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of finding characteristics of joint and welding part will be introduced. Most parts of this paper was quoted from the papers of LMS.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.11a
• /
• pp.135-140
• /
• 1994

Over past decades, numerous in vitro model has been developed to investigate drug metabolism. In the order of complexity we found the isolated perfused liver, hepatocytes in co-culture with epithelial cells, hepatocytes in suspension and in primary culture and subcellular hepatic microsomal fractions. Because they can be easily prepared from both animals (pharmacological and toxicological species) and humans (whole livers as well as biopsies obtained during surgery) hepatocytes in primary culture provide the most powerful model to better elucidate drug behavior at an early stage of preclinical development such as : 1. the characterization of main biotransformation reactions. 2. the identification of phase I and phase II isozymes involved in such reactions 3. the evaluation of interspecies differences allowing the selection of a second toxicological animal species more closely related to man on the basis of metabolic profiles 4. the detection of the inducing and/or inhibitory effects of a drug on metabolic enzymes, the prediction of drug interactions 5. the estimation of inter-individual variability in biotransformation reactions. The use of hepatocytes, and in particular those obstained from humans, at an early stage of drug development allows the obtention of more predictive preclinical data and a better knowledge of drug behavior in humans before the first administration of the drug in healthy volunteers.

• BMB Reports
• /
• v.36 no.4
• /
• pp.390-398
• /
• 2003

The CDP/Cux transcription factor was previously shown to be proteolytically processed at the G1/S transition. In view of characterizing and eventually identifying the protease responsible for CDP/Cux processing, we have established an in vitro proteolytic processing assay. CDP/Cux recombinant proteins expressed in mammalian or bacterial cells were efficiently processed in vitro using as a source of protease either whole cell extracts, the nuclear or the cytoplasmic fraction. Processing was found to take place optimally at a lower pH, to be insensitive to variations in salt concentration, and to be inhibited by the protease inhibitors MG132 and E64D. Interestingly, the bacterially-produced substrate was more efficiently processed than the substrate purified from mammalian cells. Moreover, processing in vitro was more efficient when CDP/Cux substrates were purified from populations of cells enriched in the S phase than in the G1 phase of the cell cycle. Altogether, these results suggest that post-translational modifications of CDP/Cux in mammalian cells inhibits processing and contributes to the cell cycle-dependent regulation of processing. The in vitro processing assay described in this study will provide a useful tool for the purification and identification of the protease responsible for the processing of CDP/Cux.