• 한국운동역학회지
• /
• 제26권4호
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.9-16
• /
• 2015

본 연구에서는 북한의 잠수함 발사 탄도미사일의 비행궤적을 시뮬레이션하고 발사방법에 따른 특성을 분석하였다. 최근 북한은 잠수함 발사 탄도미사일의 비행시험을 실시하였으며, 이는 국제적인 안보에 상당한 위협이 되고 있다. 북한은 러시아의 퇴역 잠수함을 해체하는 과정에서 잠수함 발사 탄도미사일 관련 기술을 확보하였고, 이와 관련된 실험을 지속적으로 하는 것으로 알려졌다. 북한의 잠수함 발사 탄도미사일 개발이 완료되고 실전 배치된다면, 이는 우리나라에 비대칭적인 위협 요소로 작용하게 될 것이다. 따라서 이러한 위협에 능동적으로 대응하기 위해서는 잠수함 발사 탄도미사일의 위협에 대한 과학적이고 논리적인 분석이 이루어져야 한다. 이러한 관점에서 본 연구에서는 북한의 잠수함 발사 탄도미사일의 운동 모델을 작성하고 이를 시뮬레이션 하였다. 또한 잠수함 발사 탄도미사일의 자세각을 조절하여 사거리를 조정하였으며 이에 대한 특성변화에 대해 기술하였다. 도출된 SLBM 비행궤적을 고려할 때 중간 단계부터 종말 단계까지의 효과적인 대응을 위해서는 해상기반 탄도미사일 방어체계가 필수적으로 요구되어 진다.

• 한국항공우주학회지
• /
• 제49권8호
• /
• pp.681-688
• /
• 2021

본 논문은 시험발사체의 비행궤적 및 낙하점 분산 분석에 대해 다룬다. 2018년 11월의 시험발사체 비행시험 전/후에 수행한 비행궤적 및 낙하점 분산 분석 과정을 설명하고 비행시험 결과와의 비교를 통해 분산 분석 방안이 적절하였음을 보인다. 발사체의 궤적 및 낙하점 분산은 발사체 성능 오차 요인 및 대기권에서의 바람 영향을 고려한 6자유도 몬테카를로 시뮬레이션을 통해 이루어진다. 이와 같이 사전에 분석한 결과를 토대로 비행시험 전에 낙하 안전 영역을 설정한다. 결과적으로, 시험발사체는 사전에 분석한 궤적 및 낙하점 분산 범위 내에서 안전하게 비행하였다.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1047-1054
• /
• 2007

This paper presents a high efficiency direct instantaneous torque control (DITC) of Switched Reluctance Motor(SRM) based on the nonlinear model. The DITC method can reduce the high inherent torque ripple of SRM drive system, but drive efficiency is somewhat low due to the high current and switching loss during commutations. In order to reduce a torque ripple, a fast torque reference trajectory is selected at every instantaneous rotor position. Based on the nonlinear model of SRM, the developing torque by one phase is fixed and the other phase is regulated for minimum switchings of phase switch and variation of torque. The switching during commutation can be reduced and fast commutation can be obtained in the proposed method. As a result, drive efficiency could be improved as well as torque ripple reduction. The validity of proposed method is verified by computer simulations and comparative experiments.

• Wind and Structures
• /
• 제17권2호
• /
• pp.185-202
• /
• 2013

The goal of this study was to investigate the vulnerability of roof tile systems and metal shutters to roof tile debris. Three phases addressed the performance of tile roof systems and metal shutters impacted by roof tile debris. The first phase experimentally evaluated the tile fragment size and quantity generated by a tile striking a tile roof system. The second phase experimentally quantified the puncture vulnerability of common metal panel shutter systems as a function of tile fragment impact speed. The third phase provided context for interpretation of the experimental results through the use of a tile trajectory model. The results provide supporting evidence that while metal panel window shutters provide significant protection against a prevalent form of windborne debris, these systems are vulnerable to tile fragment puncture in design level tropical cyclones. These findings correlate with field observations made after Hurricane Charley (2004).

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.1922-1927
• /
• 2003

Nonlinear normal mode (NNM) vibration, in a nonlinear dual mass Hamiltonian system, which has 6$\^$th/ order homogeneous polynomial as a nonlinear term, is studied in this paper. The existence, bifurcation, and the orbital stability of periodic motions are to be studied in the phase space. In order to find the analytic expression of the invariant curves in the Poincare Map, which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space, Whittaker's Adelphic Integral, instead of the direct integration of the equations of motion or the Birkhoff-Gustavson (B-G) canonical transformation, is derived for small value of energy. It is revealed that the integral of motion by Adelphic Integral is essentially consistent with the one obtained from the B-G transformation method. The resulting expression of the invariant curves can be used for analyzing the behavior of NNM vibration in the Poincare Map.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.204-210
• /
• 2018

As the 4th industrial revolution and artificial intelligence technology develop, it is expected that there will be a revolutionary changes in the security robot. However, artificial intelligence system requires enormous hardwares for tremendous computing loads, and there are many challenges that need to be addressed more technologically. This paper introduces precise tracking control technique of autonomous system that need to move repetitive paths for security purpose. The input feedforward signal is generated by using the inverse based iterative learning control theory for the 2 input 2 output nonminimum-phase system which was difficult to overcome by the conventional feedback control system. The simulation results of the input signal generation and precision tracking of given path corresponding to the repetition rate of extreme, such as bandwidth of the system, shows the efficacy of suggested techniques and possibility to be used in military security purposes.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.985-994
• /
• 1997

The reaction of gas-phase atomic hydrogen with hydrogen atoms chemisorbed on Fe(110) surface is studied by use of classical trajectory procedures. Flow of energy between the reaction zone and bulk solid phase has been treated in the generalized Langevin equation approach. A London-Eyring-Polanyi-Sato energy surface is used for the reaction zone interaction. Most reactive events are found to occur in strong single-impact collisions on a subpicosecond scale via the Eley-Rideal mechanism. The extent of reaction is large and a major fraction of the available energy goes into the vibrational excitation of H2, exhibiting a vibrational population inversion. Dissipation of reaction energy to the heat bath can be adequately described using a seven-atom chain with the chain end bound to the rest of solid. The extent of reaction is not sensitive to the variation of surface temperature in the range of Ts=0-300 K in the fixed gas temperature, but it shows a minimum near 1000 K over the Tg=300-2500 K.

• 전기전자학회논문지
• /
• 제8권1호
• /
• pp.96-107
• /
• 2004

본 연구에서는 고도의 비선형 로봇 매니플레이터를 위한 새로운 적분 가변 구조 제어기를 설계하였다. 특수 적분 슬라이딩 면과 외란 관찰기를 이용한 사전 성능을 갖는 개선된 레귤레이션 제어이다. 어떠한 리칭 구간도 없이 주어진 초기조건부터 원점까지 슬라이딩 궤적을 정확히 사전 결정하기 위하여 특수한 초기 조건을 갖는 적분 변수를 갖는 슬라이딩 면이 채택되었다. 그리고 외란 관찰기를 사용한 연속 입력은 큰 계산 부하 없이 사전 추적오차 범위내의 사전에 결정된 슬라이딩 궤적을 추적하게 한다. 사전에 결정된 슬라이딩 궤적을 사전에 결정된 추적 오차의 성능은 슬라이딩 면의 값과 슬라이f딩 출력의 오차와 관계와 페루프 안정성과 함께 두 개의 정리를 통하여 명확히 검진되었다. 제안된 레귤레이션 제어기의 설계는 성능 설계와 강인성 설계로 각 독립 링크 상에 분리된다. 제안된 알고리즘의 유용성은 매개변수 불확실성과 페이로드 변동하의 이 축 로봇의 레귤레이션 제어에 대한 시뮬레이션 연구를 통하여 무 리칭 구간, 무 오버슈트, 사전 추적 오차를 갖는 사전 결정 출력, 용이한 출력 가변성, 설계 단계의 분리 등의 관점에서 입증되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.358-363
• /
• 2008

The spray cross-section characteristics of two-phase spray that using external-mixing nozzle injected into a subsonic cross flow were experimentally studied with various ALR ratio that is $0{\sim}59.4%$. Suction type wind tunnel was used and experiments were conducted to ambient environment. Several plain orifice nozzles with L/d of 30 and orifice diameter of 0.5 mm and orifice length 1.5 mm were tested. Free stream velocity profiles at the injection location were measured using hot wire. Spray images were captured to study collision point and column trajectory. Phase Doppler particle analyzer(PDPA) was utilized to quantitatively measuring droplet SMD, volume flux. Measuring probe of PDPA positions was moved 3-way transverse machine. SMD distributions were layered structure and peaked at the top of the spray plume and low value at bottom of the spray. Volume flux of spray was distributed to the two side region and volume flux quantity decreased when ALR ratio increased. It was found that the perpendicularly injected two-phase spray jet of external mixing into a cross flow showing that mistlike spray moved away from the test section bottom region.