• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.242-247
• /
• 1990

By self-homodyne method we measured the relative phase fluctuation of a light wave. Balanced detection system can eliminate local oscillator excess noise and multiport detection makes it possible ot measure the phase change of the signal beam. Deriving the SB(Signal Beam) and the LO(Local Oscillator) from the same laser source, we find the SB maintain constant phase relative to that of the LO. We have introduced a phase fluctuation in the SB by modulating the beam path of the SB. The measured phase fluctuation agreed well with the predicted one, thereby we confirmed the reliability of our system.

• International Journal of Fluid Machinery and Systems
• /
• 제7권2호
• /
• pp.42-53
• /
• 2014

Phase resonance in Francis type hydraulic turbine is studied. The phase resonance is a phenomenon that the pressure fluctuation in the penstock of hydraulic turbine installation can become very large when the pressure waves from each guide vane caused by the interaction with the runner vane reach the penstock with the same phase. Experimental and numerical studies have been carried out using a centrifugal fan. In the present study, comparisons between the pump mode and the turbine mode operations are made. The experimental and numerical results show that the rotational direction of the rotor does not affect characteristics of the pressure fluctuation but the propagation direction of the rotorstator interaction mode plays an important role. Flow rate fluctuations through the stator are examined numerically. It has been found that the blade passing flow rate fluctuation component can be evaluated by the difference of the fluctuating pressure at the inlet and the outlet of the stator. The amplitude of the blade passage component of the pressure fluctuation is greater at the stator inlet than the one at the stator outlet. The rotor-stator interaction mode component is almost identical at the inlet and the outlet of the stator. It was demonstrated that the pressure fluctuation in the volute and connecting pipe normalized by the flow rate fluctuation becomes the same for pump and turbine mode operations, and depends on the rotational direction on the interaction mode.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1759-1766
• /
• 2001

Vibration transient generated by developing localized fault in gear can be used as indicators in gear fault detection. In this paper, we propose the zoomed phase map for a fault signal using continuous wavelet transfers to detect this vibration transient. Local fault induces the abrupt fluctuation of load exciting tooth and phase lag in the vibration signal measured on the gearbox. The relatively large fault like "tip breakage" easily can be detected by the clear fluctuation of exciting load. However, minor fault like "initial pitting"cannot be detected using the load fluctuation. To defect this kind of minor fault, the phase map for a fault signal is taken into account. The phase lag by minor fault is observed well in the zoomed phase map.

• 한국광학회지
• /
• 제7권3호
• /
• pp.219-226
• /
• 1996

빛의 입자 파동 이중성을 수용하는 양자 광학은 때때로 파동성에만 바탕을 둔 고전 광학과 상이한 결과를 보여준다. 본 논문에서는 빛이 빛살 가르개를 통과하면서 그 세기와 위상에 대한 요동이 어떻게 변화하는가를 고찰하고 고전 이론과 양자 이론이 보이는 차이점을 기술하였다. 측정 가능량을 나타내는 세가지 연산자를 통하여 고전 이론과는 달리 양자 이론에서는 빛살 가르개를 통과한 후 빛의 세기와 위상에 대한 불확실도가 증가함을 보이고 이를 진공 요동에 의한 효과로 정량적으로 분석하였다. 한편 진공효과를 배제하는 과정으로서 정규 차례를 따르는 연산자에 대한 기대치는 고전적 파동 이론의 결과와 일치함을 보임으로써 고전적 파동 이론과의 대응성을 추구하였다. 또한 이러한 결과로부터 진공 효과를 포함하는 실제의 측정 위상과 고전 이론에 대응하는 추측 위상의 구분 및 그 관계를 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.590-595
• /
• 2001

Vibration transient generated by developing localized fault in gear can be used as indicators of condition monitoring in a gear. In this paper, we propose the phase map for a fault signal using continuous wavelet transform to detect this vibration transient. Local fault induces the abrupt fluctuation of load exciting tooth and phase lag in the vibration signal measured on the gearbox. The relatively large fault like "tip breakage" easily can be detected by the clear fluctuation of exciting load. However, minor fault like "initial pitting" cannot be detected using the load fluctuation. To detect this kind of minor fault, the phase map for a fault signal is taken into account. The phase lag by minor fault is observed well in the phase map.

• 한국추진공학회지
• /
• 제8권3호
• /
• pp.68-74
• /
• 2004

수치해석 기법을 이용하여 산화제 매니폴드로 유입되는 유동의 맥동현상이 분사공을 통과하는 산화제 유량에 미치는 영향에 대해 살펴보았다. 세 가지 다른 주파수로 특정 지워지는 맥동현상을 입구유동에 부과하였을 때 모두 비슷한 유동 양상을 보였다. 즉, 산화제 입구와 가까운 지역에서는 분사공을 통한 유량이 부과된 맥동의 주파수와 같은 위상을 갖고 시간에 따라 변화하나. 반대편에서는 $180^{\cire}$의 위상차를 보였으며, 주파수가 증가할수록 유량의 진폭이 증가하는 경향을 보였다.

• Korea-Australia Rheology Journal
• /
• 제12권1호
• /
• pp.77-81
• /
• 2000

Rheological behavior of thermoset/thermoplastic blends of epoxy/polyethersulphone (PES) was monitored during curing of the epoxy resin. During the isothermal curing of the mixture, a fluctuation in viscosity just before the abrupt viscosity increase was observed. This fluctuation is found to be due to the phase separation of PES from the matrix epoxy resin during the curing. The experimentally observed viscosity fluctuation is simulated with a simple two phase suspension model in terms of the increase in domain size. The viscosity profiles obtained experimentally at different isothermal curing temperatures are in good agreement with the predictions from the simple model taking into account the viscosity change due to the growth of PES domain and the network formation of the epoxy matrix.

• 한국입자에어로졸학회지
• /
• 제12권1호
• /
• pp.21-26
• /
• 2016

In order to realize In-line and convenient measurement for solid-gas two phase flows, Light Transmission Fluctuation (LTF) based on the random variation of transmitted light intensity, light scattering theory and cross-correlation method was presented for online measurement of particle size, concentration and velocity. The statistical relationship among transmitted light intensity, particle size and particle number in measurement zone was described by Beer-Lambert Law. Accordingly, the particle size and concentration were determined from the fluctuation signal of transmitted light intensity. Simultaneously, the particle velocity was calculated by cross-correlation analysis of two neighboring light beams. By considering the influence of concentration variation in industrial applications, the improved algorithm based on spectral analysis of transmitted light intensity was proposed to improve measurement accuracy and stability. Therefore, the online measurement system based on LTF was developed and applied to measure pulverized coal in power station and raw material in cement plant. The particle size, concentration and velocity of powder were monitored in real-time. It can provide important references for optimal control, energy saving and emission reduction of energy-intensive industries.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2227-2236
• /
• 2017

In order to solve the neutral-point voltage fluctuation problem of three-phase three-level T-type inverters (TPTLTIs), the unbalance characteristics of capacitor voltages under different switching states and the mechanism of neutral-point voltage fluctuation are revealed. Based on the mathematical model of a TPTLTI, a feed-forward voltage balancing control strategy of DC-link capacitor voltages error is proposed. The strategy generates a DC bias voltage using a capacitor voltage loop with a proportional integral (PI) controller. The proposed strategy can suppress the neutral-point voltage fluctuation effectively and improve the quality of output currents. The correctness of the theoretical analysis is verified through simulations. An experimental prototype of a TPTLTI based on Digital Signal Processor (DSP) is built. The feasibility and effectiveness of the proposed strategy is verified through experiment. The results from simulations and experiment match very well.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.1019-1028
• /
• 2002

The instability of two-phase loop thermosyphons was investigated experimentally and analytically. Three orifice type inserts were used to study the effect of change in the pressure drop in the flow channel of the TLT on the flow instability and temperature fluctuation. It is observed that a decrease in the size of the orifice insert from 3.7 mm (no insert) to 0.71 mm drastically reduced the fluctuation of the temperature, especially at the evaporator section of the TLT. With the orifice type insert of 0.71 mm for the TLT, the overall temperature fluctuation was almost completely eliminated, especially at higher power input to the TLT The analysis based on the Kelvin-Helmholtz instability theory seems to predict reasonable well the loop stability state of the TLT with experimentally determined constant factors.