• Transactions on Electrical and Electronic Materials
• /
• 제9권2호
• /
• pp.84-88
• /
• 2008

In this paper, we analyze the errors associated with electric field interference for fiber-optic voltage sensors working in a three-phase electric system. For many practical conductor arrangements, the electric filed interference may cause errors unacceptable for the accuracy requirements of the sensors. We devised a real time compensation method for the interference by introducing geometric and weight factors. We realized the method using simple electronic circuits and obtained the real time compensated outputs with errors of 1 %.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1853-1859
• /
• 2019

The two-thermocouple method was investigated experimentally to evaluate its accuracy for the measurement of local wall temperature and heat flux on a heat transfer tube with an electric heater rod installed in an annulus channel. This work revealed that a thermocouple flush-mounted in a surface groove serves as a good reference method for the accurate measurement of the wall temperature, whereas two thermocouples installed at different depths in the tube wall yield large bias errors in the calculation of local heat flux and wall temperature. These errors result from conductive and convective changes due to the fin effect of the thermocouple sheath. To eliminate the bias errors, we proposed a calibration method based on both the local heat flux and Reynolds number of the cooling water. The calibration method was validated with the measurement of local heat flux and wall temperature against experimental data obtained for single-phase convection and two-phase condensation flows inside the tube. In the manuscript, Section 1 introduces the importance of local heat flux and wall temperature measurement, Section 2 explains the experimental setup, and Section 3 provides the measured data, causes of measurement errors, and the developed calibration method.

• Asia pacific journal of information systems
• /
• 제7권2호
• /
• pp.77-102
• /
• 1997

The use of statistical methods in the MIS research is increasing. However, there has been a meager attempt to critically evaluate the use statistical methods in MIS research papers. The review of 33G papers published in MIS Quarterly from Volume 1 to 14 resulted in three findings; (1) the portion of empirical research has been gradually increasing compared with non-empirical research, (2) univariate parametric statistical methods are most popular among MIS researchers, (3) researchers do not comply with the writing code of scientific research. This paper disscusses what errors MIS researchers might commit in using statistical research methods and how to prevent those errors in each of three stages of research, research design phase, statistical inference phase, and interpretation phase.

• 한국통신학회논문지
• /
• 제29권7A호
• /
• pp.794-806
• /
• 2004

본 논문에서는 IEEE 802.11a의 OFDM 통신시스템에 대한 송수신 주파수편차의 교정기법을 연구하고 편차주파 수들의 교정오차에 의한 잡음을 분석한다. 반송주파수편차에 의한 심볼당 회전위상을 짧은 훈련신호(short preamble)의 자기상관에서 추정한다. 잡음의 영향을 줄이기 위하여 짧은 훈련신호(short preamble)를 과도표본화 (over-sampling)한다. 파일롯(pilot) 신호를 도입하여 추정된 반송주파수편차의 오차와 표본화 주파수편차에 의한 OFDM 심볼당 회전위상을 추정한다. 이러한 회전위상의 추정과 교정에 CORDIC(Coordinated Rotational Digital Computer) 프로세서 또는 각도와 복소수의 환산표를 사용하고 이것들의 구현기법과 장단점을 비교한다. 복소수와 위상은 CORDIC 프로세서와 환산표에서 한정된 비트(bit) 개수로 계산되므로 각도양자화 오차가 있게 된다. 비트개수에 따른 각도양자화 오차를 OFDM 신호의 SNR로 나타내고 IEEE 802.11a의 편차주파수 교정에서 요구되는 최소한의 비트 개수를 제시한다. 끝으로, 모의실험을 통하여 짧은 훈련신호로 반송주파수편차를 추정하고 CORDIC 프로세서와 환산표에서 사용된 비트 개수에 따른 양자화 잡음을 검증한다.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1513-1525
• /
• 2016

Rapid and accurate phase synchronization is critical for the reliable control of grid-tied inverters. However, the commonly used software phase-locked loop methods do not always satisfy the need for high-speed and accurate phase synchronization under severe grid imbalance conditions. To address this problem, this study develops a novel open-loop phase locking scheme based on a synchronous reference frame. The proposed scheme is characterized by remarkable response speed, high accuracy, and easy implementation. It comprises three functional cascaded blocks: fast orthogonal signal generation block, fast fundamental-frequency positive sequence component construction block, and fast phase calculation block. The developed virtual orthogonal signal generation method in the first block, which is characterized by noise immunity and high accuracy, can effectively avoid approximation errors and noise amplification in a wide range of sampling frequencies. In the second block, which is the foundation for achieving fast phase synchronization within 3 ms, the fundamental-frequency positive sequence components of unsymmetrical grid voltages can be achieved with the developed orthogonal signal construction strategy and the symmetrical component method. The real-time grid phase can be consequently obtained in the third block, which is free from self-tuning closed-loop control and thus improves the dynamic performance of the proposed scheme. The proposed scheme is adaptive to severe unsymmetrical grid voltages with sudden changes in magnitude, phase, and/or frequency. Moreover, this scheme is able to eliminate phase errors induced by harmonics and random noise. The validity and utility of the proposed scheme are verified by the experimental results.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.441-447
• /
• 2022

본 논문에서는 주파수 오차 및 위상 오차가 존재하는 텔레메트리 시스템에 적용하기 위한 FLL-assisted-PLL 기반의 시각 동기 알고리즘을 제안한다. 텔레메트리 시스템은 분산 획득 장치들로부터 상태 정보를 계측하여 비행 상태를 분석할 수 있는 데이터를 생성하며, 각 상태 정보를 오차 없이 수집하기 위해서는 마스터와 슬레이브간의 정밀한 시각 동기가 필요하다. 이때, 마스터의 시각펄스에는 외부 및 내부 요소로 인하여 발생할 수 있는 주파수 및 위상 변화가 존재하므로 지속적으로 텔레메트리 데이터를 제공하기 위해서 정밀 시각 동기를 유지할 수 있는 방법이 반드시 필요하다. 본 논문에서는 고속 시각동기가 가능할 뿐만 아니라 넓은 범용성, 높은 시각 동기 정밀도를 갖는 FLL-assisted-PLL 기반의 시각 동기 알고리즘을 제안하고 구현을 통해 타당성을 검증하였다. 이때 이론적인 성능 검증을 위하여 파이썬 기반의 시뮬레이션을 수행하였으며, 실제 텔레메트리 시스템에 적용하기 위해 FPGA 내에 VHDL 로직을 구현하여 주파수 오차 및 위상 오차에 따른 성능 평가를 수행하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.169-171
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer(MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we simulated such potential phase errors in the optimized MTI.

• ETRI Journal
• /
• 제28권4호
• /
• pp.435-443
• /
• 2006

This paper presents an efficient carrier recovery algorithm combined with a turbo-coding technique in a mobile communication system. By using a block turbo code made up of independently decodable block codes, we can efficiently recover the fast time-varying carrier phase as well as correct channel errors. Our simulation results reveal that the proposed scheme can accommodate mobiles with high speed, and at the same time can reduce the number of iterations to lock the phase.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.276-279
• /
• 2003

The phase change upon reflection from target surfaces in white-light interferometer induces measurement errors when target surfaces are composed of dissimilar materials. We prove that this phase change on reflection considered of the polarization of the white-light causes the shift of both envelope peak position and fringe peak position of several tens of nanometer. In addition, we propose a new equation of white-light interference fringe pertinent to the polarization of source.

• Journal of the Optical Society of Korea
• /
• 제11권1호
• /
• pp.10-17
• /
• 2007

We need two operation modes to obtain the complex hologram without bias and the conjugate image in the modified triangular interferometer (MTI). To solve the problem, we proposed the optimized MTI with one wave plate, which can obtain cosine and sine functions by the combination of one wave plate and one linear polarizer. In the extraction of phase term using the combination of polarization components, the phase error occurs, and we analyzed such potential phase errors in the optimized MTI.