• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.545-554
• /
• 2003

Design of the optical modulator composed of a three-waveguide coupler and CPW traveling-wave electrodes was carried out. Switching phenomena of three-waveguide couplers were analyzed by using the coupled mode theory, and the coupling-lengths of the devices were calculated by means of the FDM. CPW traveling-wave electrodes were analysed by the CMM and SOR simulation technique in order to find the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electrolyte technique. The fabricated modulator chip was end-polished, pig-tailed and packaged in a brass mount with K-connector. The insertion loss and the switching voltage of the optical modulator were about 4㏈ and 19V, respectively. Network analyzer was used to obtain the S parameter and the corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted to be Z$_{c}$= 45 Ω, N$_{eff}$=2.20, and $\alpha$$_{0}$=0.055/cm√GHZ. The measured optical response R($\omega$) was compared with the theoretically estimated one, showing both responses agree well. The measurement results revealed that 3㏈ bandwidth turned out to be about 13 GHz.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.87-103
• /
• 2008

In recent years, the field of THz photonics based on THz pulse technology has gained tremendous, world-wide interest as a new exciting research subject. With a possibility of many commercial applications as well as fundamental scientific achievements in the field, many advanced nations are stepping up their effort in advancing the field of THz photonics. This fact is supported by the observation of the significant increase in the number of papers on THz pulse technology presented in renowned international journals and conferences. The subject that is interesting for the THz application is the development of THz pulse sources and detectors, and other passive devices. In this paper, we present a brief review on some of the key devices and their relavant measurement techniques such as THz photoconductive antennas, optical rectification, difference frequency geneneration with quasi-phase matching structures, electro-optic sampling, high speed real time measurements, THz transmission lines, and other various waveguide structures.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.7-13
• /
• 2012

The performance of blind equalization algorithm ISCA was compared with MSCA that is used for the minimization of the inter symbol interference which occurs in the time dispersive communication channel for digital transmission. Because of the non-linearities of a magnitude and phase transfer characteristics of a communication channel, the transmitting signal will be received that band limited and time dispersived. Therefore the distortion was compensated by using the self adaptive equalizer at the receiving side, then passing through the detector for the decision of "1" or "0". At this time the Constellation Dependent Constant is played an important role in the adaptive equalizer used on the receiver. In order to calculation of this constant, the ISCA and MSCA was used the second order statistics. The ISCA and MSCA which are possible to compensation of mensioned transfer function simulataneously, are improved the performance of original SCA algorithm and then was compared the performance by computer simulation. For this, the recovered constellation, residual isi and MSE was used, and a result of performance comparison, the ISCA algorithm has better than the MSCA in every performance index. But on the steady state of equalizer, the variation of performance due to the CME terms in the MSCA equalization algorithm was less than the ISCA, so MSCA has better stability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.19-24
• /
• 2007

With recent advancement of high-speed, multi-gigabit data transmission capabilities, serial links have been more widely adopted in industry than parallel links. Since the parallel link design forces its transmitter to transmit both the data and the clock to the receiver at the same time, it leads to hardware's intricacy during high-speed data transmission, large power consumption, and high cost. Meanwhile, the serial links allows the transmitter to transmit data only with no synchronized clock information. For the purpose, clock and data recovery circuit becomes a very crucial key block. In this paper, a 5.4Gbps half-rate bang-bang CDR is designed for the applications of high-speed graphic DRAM interface. The CDR consists of a half-rate bang-bang phase detector, a current-mirror charge-pump, a 2nd-order loop filter, and a 4-stage differential ring-type VCO. The PD automatically retimes and demultiplexes the data, generating two 2.7Gb/s sequences. The proposed circuit is realized in 66㎚ CMOS process. With input pseudo-random bit sequences (PRBS) of $2^{13}-1$, the post-layout simulations show 10psRMS clock jitter and $40ps_{p-p}$ retimed data jitter characteristics, and also the power dissipation of 80mW from a single 1.8V supply.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.2
• /
• pp.161-168
• /
• 2006

The efficiency of six different extraction methods for the analysis of aroma components from pine needle(P. densiflora) was compared by gas chromatography-mass selective detector(GC-MSD). The six methods were dynamic headspace(DHS), reduced pressure headspace(RPHS), solid-phase microextraction(SPME), simultaneous distillation-extraction(SDE), supercritical fluid extraction(SFE) and pyrolysis distillation extraction(PDE). A total of 65 compounds were identified by using the six different extraction methods. These compounds are classified into six categories in terms of chemical functionality: 25 hydrocarbons, 16 alcohols, 9 carbonyls, 6 esters, 7 acids, and 2 ethers. The aroma compounds having low boiling point were more abundant in DHS, RPHS, and SPME extracts. On the other hand, the aroma compounds having high boiling point were more abundants in SDE, SFE and PDE extracts. The acid compounds were extracted by heat-based extraction methods such as SDE, SFE, PDE, but not by DHS, RPHS and SPME, which used neither solvent nor heat. The oxygenated terpens, hexanal, hexanol, and hexadienal were more abundant in DHS and RPHS extracts, compared with the other methods.

• Korean Journal of Pharmacognosy
• /
• v.43 no.4
• /
• pp.279-285
• /
• 2012

The Mume Fructus (MF) has been used for relieves cough, arrests arrest chronic diarrhea, treat fluid depletion, and treat ascariasis in Korea. In this study, a high-performance liquid chromatography (HPLC) method was established for simultaneous determination of six main components of MF. Additionally, we were investigated the anti-inflammatory and anti-allergic effects of MF extract on lipopolysaccharide (LPS)-treated RAW264.7 cells and tumor necrosis factor (TNF)-${\alpha}$/interferon (IFN)-${\gamma}$-treated HaCaT cells. The analytical column for separation was used a Gemini $C_{18}$ column maintained at $40^{\circ}C$. The mobile phase consisted of 1.0% (v/v) acetic acid in water (A) and 1.0% (v/v) acetic acid in acetonitrile (B). The flow rate was 1.0 mL/min and the detector was a photodiode array (PDA) set at 280 nm and 320 nm. We evaluated the inhibitory effect of MF extract on the production of inflammatory markers, nitric oxide (NO) and prostaglandin $E_2$ ($PGE_2$) in LPS-stimulated RAW264.7 cells and thymus- and activation-regulated chemokine (TARC/CCL17) in TNF-${\alpha}$/IFN-${\gamma}$-treated HaCaT cells, respectively. We confirmed the genes expression related with TARC, macrophage-derived chemokine (MDC/CCL22) and regulated on activation, normal T cell expressed and secreted (RANTES/CCL5) in HaCaT keratinocyte cells by MF extract. The contents of the five compounds in MF were 0.22-1.01 mg/g. Also, the MF extract show inhibition of about 78% and 75% on NO and $PGE_2$ production at the concentration 1000 mg/mL in RAW264.7 cells. MF extract suppressed the hTARC level and genes expression such as TARC, MDC, and RANTES on TNF-${\alpha}$/IFN-${\gamma}$-treated HaCaT cells.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.319-323
• /
• 2008

Analytical method for determination of florfenicol was developed for estimate veterinary drug residue of unestablished MRLs in meat. The method was validated in correspondence with the CODEX guideline for florfenicol residue in meat. The samples mixed with sodium sulfate were extracted with ethyl acetate. After clean-up, the residue was dissolved in mobile phase and analyzed using high-performance liquid chromatography with fluorescence detector. The calibration curve showed good linearity($r^2=0.9997$) within the concentration range of $0.05{\sim}1.0\;mg/kg$. The limit of detection(LOD) and limit of quantification(LOQ) were validated at 0.012 and 0.039 mg/kg, respectively. The recoveries in fortified meat ranged from 85.6 to 95.6%($1.1{\sim}5.3%$ RSD) at the 0.05 to 0.4 spiking levels. We monitored 150 samples of meats that were purchased in Korea(Seoul, Busan, Daegu, Daejeon and Gwangju). Among tested samples, florfenicol was detected in 1 of pig at the level of 0.040 mg/kg, and below LOQ in 1 of cattle, 2 of pig and 2 of chicken. The residues of florfenicol in the tested samples were within the MRLs.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.3
• /
• pp.229-235
• /
• 2002

Objectives : To evaluate the effects on the formation of benzidine-hemoglobin, and benzidine metabolite-hemoglobin adducts, caused by pretreatment with the known xenobiotic metabolism effectors, ethanol and phenobarbital, in rats administered Direct Black 38 dye. Methods : The experimental rats were divided into three groups: a control group, an ethanol group and a phenobarbital group. Rats were pretreated with ethanol (1g/kg) or phenobarbital (80mg/kg) 24 hours prior to the oral administration of Direct Black 38 (0.5mmol/kg), with the control group being administered the same amount of distilled water. Blood samples were obtained from the vena cava of 5 rats from each group prior to, and at 30 min, 3h, 5h, 9h, 12h, 24h, 48h, 72h, 96h, and 144h following the oral administration of Direct Black 38. Directly after sampling the blood was separated into hemoglobin and plasma, with the adducts being converted into aromatic amines by basic hydrolysis. Hydrolyzed benzidiene, monoacetylbenzidine and 4-aminobiphenyl were analyzed by reverse-phase liquid chromatography with an electrochemical detector, The quantitative amount of the metabolites was expressed by the hemoglobin binding index (HBI). Results : In the ethanol group, benzidine-, monoacetylbenzidine-, and 4-aminobiphenyl-HBI were increased to a greater extent than those in the control group. These results were attributed to the ethanol inducing N-hydrgxylation, which is related to the formation of the hemoglobin adduct, In the phenobarbital group, all the HBIs, with the exception of the benzidine-HBI, were increased to a greater extent than those of the control group. These results were attributed to the phenobarbital inducing N-hydroxylation related to the formation of the hemoglobin adduct. The N-acetylation ratio was only increased with the phenobarbital pretreatment due to the lower benzidine-HBI of the phenobarbital group compared to these of the control and ethanol groups. The N-acetylation ratios for all groups were higher than f for the duration of the experimental period. Although the azo reduction was unaffected by the ethanol, it was inhibited by the phenobarbital, The ratio of the benzidine-HBI in the phenobarbital group was lower than those of the ethanol the control groups for the entire experiment. Conclusion : Our results indicate that both ethanol and phenobarbital increase the formation of adducts by the induction of N-hydroxylation, but also induced N-acetylation. Phenobarbital decreased the formation of benzidine-HBI due to the decrease of the azo reduction. These results suggest that the effects or ethanol and phenobarbital need to be considered in the biochemical monitoring of Direct Black 38.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.685-690
• /
• 2010

Rubiadin, a major compound of noni ($Morinda$ $citrifolia$) adventitious root, is highly valued in pharmaceutical industry due to hepatoprotective activity. To dissect rubiadin's effective extraction condition, extraction process of noni adventitious roots was performed with different solvent types, ratio of water to methanol (water, 20, 40, 60, 80, and 100% of methanol), extraction time, and extraction method. In contrast, we also developed a reverse- phase HPLC assay method to determine rubiadin from noni adventitious roots. The HPLC assay of rubiadin was performed by C-18 column using a gradient solvent system of methanol and water with UV detector at 280 nm. The extraction efficiency of different types of solvents were increased in order of methanol (0.08%) > ethanol (0.05%) > acetonitrile (0.03%) > acetone (0.02%) and methylene chloride (0.02%). The results of rubiadin extraction using different solvents showed that 1 hour of ultrasonic extraction was effective in order of 60% methanol (0.21%) > 80% methanol (0.13%) > 100% methanol (0.07%), 40% methanol (0.07%) and 2 hours of reflux extraction was effective in order of 60% methanol (0.21%) > 40% methanol (0.17%) > 80% methanol (0.14%). To compare the extraction efficiency of rubiadin according to the extraction methods and time for high rubiadin content, the extracts of rubiadin in noni adventitious roots were isolated with the methods of ultrasonic extraction, shaking extraction and reflux extraction. Rubiadin extracted from the methods of ultrasonic waves and shaking displayed the highest contents at 8 and 24 hours, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.