• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.56.2-56.2
• /
• 2011

As rotor blade of a wind turbine becomes larger to satisfy the economic efficiency for offshore wind farm, the numerical analysis considering wind profile is getting emphasized. In this paper, the study for the power characteristic of a wind turbine is carried out using NREL phase VI wind turbine applied wind profile. The experimental data of NASA Ames wind tunnel for inflow velocity 7m/s is used and the numerical result is obtained by using CFD commercial solver(FLUENT).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.277-284
• /
• 2007

This paper describes independent phase BLDC motor with a maximum torque among BLDC motor used for electric propulsion system Independent phase BLDC motor has characteristic that phases of stator we independent electrically. This paper is modeling two type of 3 phases BLDC motors, one has Y-connection type and the other has independent type, and it shows simulation of them, compares its characteristics. As a result of simulation, phase voltage of independent 3 phase BLDC motor is higher than Y-connection three phase BLDC motor. When the stator resistance and inductance are stable, high phase voltage causes an increase in maximum phase current and an increases in it serially causes an increase of maximum torque. It is also found that the current pulsation of independent phase BLDC motor was decreased by controlling phase current of independent BLDC motor.

• 전기의세계
• /
• v.27 no.3
• /
• pp.47-52
• /
• 1978

This paper deals with the phase converter. The single-phase inverter with 120.deg.C phase-lagging is used for the phase conversion. As the waveform of the inverter is rectangular, the output waveforms of the three-phase lines include the harmonics. Single-phase operation by using phase converter and three-phase balanced operation of the three-phase induction motor are compared, and the effects of the harmonics are analyzed and discussed.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1170-1175
• /
• 2005

This paper is analyzed the characteristic of multi-phase inverter for the electric propulsion system. Two BLDC motors with 3 and 7 phases are designed with these features in order to simulate the effect of increasing the number of phases. From the simulation results, the 7-phase given better performance in terms of torque pulsation. Also, the torque pulsation can be reduced further by increasing the number of phases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.114-124
• /
• 2011

In this paper, we present a 2 GHz compact analog phase shifter with linear phase-tune characteristic. The compact phase shifter was designed base on a lumped all pass network and implemented using a ceramic substrate fabricated with thin-film technique. For a linear phase-tune characteristic, a capacitance of the varactor diode for a tuning voltage was linearized by connecting series capacitor and subsequently produced an almost linear capacitance change. The inductor and bias circuit in the all pass network was implemented using a spiral inductors for small size, which results in the size reduction to $4\;mm{\times}4\;mm$. In order to measure the phase shifter using the probe station, two CPW pads are included at the input and output. The fabricated phase shifter showed an insertion loss of about 4.2~4.7 dB at 2 GHz band and a total $79^{\circ}$ phase change for DC control voltage from 0 to 5 V, and showed linear phase-tune characteristic as expected in the design.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1051_1052
• /
• 2009

This paper deals with operational characteristic analysis of a single-phase PCS (Power Conditioning System) for PV (Photovoltaic) power generation system with AF (Active Filter) function. The theory of dq transformation has been applied to the control strategy of a single-phase PV power generation system to implement the AF function. Application of the virtual two-phase using phase-shift makes it possible to use the dq theory for the single-phase PV power generation system. The authors are sure that the proposed system is a very useful to compensate harmonics caused by nonlinear loads in a single-phase utility system. In this paper, not only a theoretical aspect of the single-phase PV-AF system is discussed, but also the DSP (Digital Signal Processor) based experiment results are presented to demonstrate the effectiveness of the single-phase PV-AF system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1282-1285
• /
• 2004

The high voltage driving system with multi-phase shifter including piezoelectric actuators comprised a driving power unit for outputting the driving power by converting input alternate current into direct current, a frequency shifting unit for supplying the direct current power and shifting or generating a frequency, a high-voltage amplification unit for amplifying the input signal outputted from the driving power unit and the frequency shifting unit into a high-voltage signal, and a phase shifting unit for shifting the phase difference of the amplified signal applied to the high-voltage amplification unit and driving plural piezoelectric actuators sequentially. The results that the operating voltage was stable, the voltage loss ratio was low and the response velocity was fast could be obtained. An experiment on performance of the high voltage driving system with multi-phase shifter designed and manufactured as above described was conducted by using a piezoelectric pump having 3 sheets of round unimorph piezoelectric actuators laminated respectively in a rectangular case. It sucks any fluid by causing the first piezoelectric actuator to shift from the inlet porter side, the phase delay of 60$^{\circ}$ causes the second piezoelectric actuator to begin to shift, and the phase delay of 120$^{\circ}$ causes the third piezoelectric actuator to begin to shift. As a result of measuring each change in the outlet flow rate of the piezoelectric pump, it was shown that the frequency-flow rate characteristic, the voltage-flow characteristic, and the load pressure-flow rate characteristic were improved.

• Journal of architectural history
• /
• v.7 no.4 s.17
• /
• pp.131-150
• /
• 1998

Main theme of this study is the acceptance phase of western architectural culture in modern east-north asia through a series of actual survey and typological analysis of existing church buildings in modern Korea. China. Japan. For this study, 126 modern church buildings of Korea, China, Japan are selected. Also, main subject of this study has deal with the side of culture - thought which background of christianity acceptance and acceptance mind of acceptance main-body, culture adaptation and transformation based on characteristic culturalization of Korea, China, Japan. Especially, I would consistently tried to see the acceptance phase of western architectural culture according to differential acceptance mind of acceptance main-body based on characteristic culturalization of three countries. Conclusively, in the point of view of western architectural culture acceptance phase, it could be said that Korean church architecture had characterized as a blending phase of the two eclectic architectural culture. And in the case of china, as a coexistance phase of the two architectural culture with more western style-oriented. On the other hand, Japanese church architecture had characterized as a syncretism phase of the both traditional and western architectural culture, though it is eclectic style-oriented. Therefore, it is thought that different acceptance mind of western culture had main factors caused of differential acceptance phase, when the two architectural culture, the traditional and the western, encounters.

• Korean Journal of Optics and Photonics
• /
• v.27 no.3
• /
• pp.101-105
• /
• 2016

In this study we propose the novel optimization method of the phase-only computer-generated hologram (CGH), to improve calculation speed compared to the conventional method. While the conventional method is calculated using numerical analysis, the novel method is calculated using the phase-shift characteristic of Fourier transformation. In addition, the selectivity of noise filtering lets it decrease the calculation time. The validity of the reconstructed image using the novel method is verified by comparing simulation results to ideal and conventional data, and the improvement of texture and sharpness of the reconstructed image is confirmed by simulation.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1067-1068
• /
• 2011

This paper deals with the method of starting characteristic analysis of a single-phase line-start permanent magnet (LSPM)motor. The starting characteristic such as current, torque and is important in LSPM because of demagnetizing of the permanent magnet. In this paper, the characteristic analysis is performed using finite element method.