• 한국ITS학회 논문지
• /
• 제11권5호
• /
• pp.89-96
• /
• 2012

본 논문에서는 인터디지털 헤어핀 공진기를 이용하여 UTIS (도시 교통 정보 시스템)에 사용 가능한 저 위상잡음 발진기를 설계 및 제작하였다. 인터디지털 헤어핀 공진기는 기존의 소형화된 헤어핀 공진기에 인터디지털을 접목시켜 공진기의 물리적인 크기를 기존 대비 약 70%로 축소시켰고, 고조파 특성을 향상시켰다. 또한 132 의 높은 Q 값은 저 위상잡음 발진기 설계에 적합하다. UTIS 용 저 위상잡음 발진기는 5.75 GHz에서 출력 12 dBm 의 전력과 100 kHz offset 에서 -100.8 dBc/Hz 의 낮은 위상잡음을 얻었다. 이는 기존의 헤어핀을 이용한 발진기에 비해 12 dB 정도의 개선을 보여준다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4873-4888
• /
• 2018

A joint blind parameter estimation algorithm based on minimum channel stability function aimed at the non-cooperative high-order modulated paired carrier multiple access (PCMA) signals is proposed. The method, which uses hierarchical search to estimate time delay, amplitude and frequency offset and the estimation of phase offset, including finite ambiguity, is presented simultaneously based on the derivation of the channel stability function. In this work, the structure of hierarchical iterative processing is used to enhance the performance of the algorithm, and the improved algorithm is used to reduce complexity. Compared with existing data-aided algorithms, this algorithm does not require a priori information. Therefore, it has significant advantage in solving the problem of blind parameter estimation of non-cooperative high-order modulated PCMA signals. Simulation results show the performance of the proposed algorithm is similar to the modified Cramer-Rao bound (MCRB) when the signal-to-noise ratio is larger than 16 dB. The simulation results also verify the practicality of the proposed algorithm.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.192-194
• /
• 2002

We present the results on the calibration of iso-center positions using the quality assurance system established at PMRC for determination of center position in X-ray and proton irradiation fields. Details on the system are presented in another presentation in this session. The equipment in the system is mounted on a patient treatment bed in each proton exposure room, G1 or G2. A center of a stainless ball on the equipment is set at a cross of laser markers located around the iso-center and fixed on the room and on the snout in the gantry. A proton beam or an X-ray beam is exposed onto the ball through a brass collimator of 100 mm ${\times}$ 100 mm and projected onto the imaging plate set at I cm behind the ball. On the axis perpendicular to the thrust axis of the gantry on the imaging plate, a distance between a center of the collimator image and a center of the ball image varies as a cosine function of gantry angles unless the ball is set on the iso-center. An amplitude of the cosine curve shows the distance between the ball and the iso-center, an offset the offset of the collimator, and a phase shift at a zero crossing point the ball direction viewed from the iso-center. We present the relation among the iso-center position, the laser maker position, and the center of proton and X-ray irradiation fields. Its stability and its reproducibility are discussed.

• 한국통신학회논문지
• /
• 제27권5C호
• /
• pp.530-534
• /
• 2002

본 논문에서는 발진기의 안정도를 높이기 위해 2차 고조파를 병렬 궤환하는 새로운 구조로 자체 위상고정의 효과를 나타낼 수 있도록 제안하였다. 이 구조는 Hair-Pin 공진 발진기를 사용한 대역통과 여파기, 방향성 결합기, 기본주파수 발진기, 체배기, 그리고 출력전력의 궤환 및 격리를 위한 Wilkinson 전력분배기로 구성되었다. 제안된 발진기는 19.5GHz에서 2.5dBm의 출력을 나타내었으며 기본 주파수 억압 -25 dBc, 위상잡음은 중심주파수 19.5 GHz의 10 kHz offset 지점에서 -76.52 dBc/Hz의 안정된 특성을 얻었다.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.80-83
• /
• 2022

This paper proposes an initial rotor polarity detection algorithm of a single-phase permanent magnet synchronous motor (SP-PMSM) related to stable open-loop starting for sensorless operation. Generally, the SP-PMSM needs an asymmetric air-gap structure to can avoid the initial starting failure at zero torque point. Therefore, the rotor polarity information can be obtained by using the DC offset current direction of a stator current through a high frequency voltage injection into an SP-PMSM with an asymmetric air gap. In this paper, the proposed rotor initial polarity detection algorithm is verified through several experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권4호
• /
• pp.484-494
• /
• 2014

We describe a digitally controlled oscillator (DCO) which compensates the frequency variations for process, voltage, and temperature (PVT) variations with an accuracy of ${\pm}2.6%$ at 2.5 GHz. The DCO includes an 8 phase current-controlled ring oscillator, a digitally controlled current source (DCCS), a process and temperature (PT)-counteracting voltage regulator, and a bias current generator. The DCO operates at a center frequency of 2.5 GHz with a wide tuning range of 2.2 GHz to 3.0 GHz. At 2.8 GHz, the DCO achieves a phase noise of -112 dBc/Hz at 10 MHz offset. When it is implemented in an all-digital phase-locked loop (ADPLL), the ADPLL exhibits an RMS jitter of 8.9 ps and a peak to peak jitter of 77.5 ps. The proposed DCO and ADPLL are fabricated in 65 nm CMOS technology with supply voltages of 2.5 V and 1.0 V, respectively.

• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.131-134
• /
• 2003

We demonstrated an optical frequency synthesizer based on a femtosecond (fs) mode-locked Ti:sapphire (Ti:s) laser by simultaneously stabilizing the carrier-offset frequency, $f_{ceo}$, and repetition rate, $f_{ rep}$, referenced to the Cs atomic frequency standard. By using two wide-band digital phase-detectors we realized a phase-coherent link between $f_{rep} and f_{ceo} with the relation f_{ceo} = f_{AOM} 5/6f_{rep} ≡ 0, where f_{AOM} = 5/6f_{rep}$ is the phase-locked driving frequency of an acousto-optic modulator (AOM) in a self-referencing interferometer and $f_{rep}$ = 100 MHz. As a result, we could stabilize all components of the fs laser comb at once with an equal frequency separation $f_{rep}$ = 100 MHz with $f_{ceo}$ = 0. In our optical frequency synthesizer, the frequency of the nth component ($f_{n}$) is given exactly by the simple relation $f_n = nf_{rep}$, enabling us to use the fs laser comb as a frequency ruler in the optical frequency metrology.

• 한국항해항만학회지
• /
• 제28권4호
• /
• pp.293-297
• /
• 2004

In this papers, an S-band oscillator of the low phase noise property using a miniaturized micro-strip hairpin shaped ring resonator is presented The substrate has a dielectric constant $\epsilon_\gamma$＝3.5, a thickness h＝0.508 mm, and loss tangent $tan\delta$＝0.002. A designed and fabricated oscillator shows low phase noise performance of 99. 71 dBc/Hz at 100 KHz offset frequency and of output power 19.584 dBm at center frequency 2.450 GHz. This circuit was fabricated with hybrid technique, but can be fully compatible with the MMIC due to its entirely planar structure.

• 대한전자공학회논문지SD
• /
• 제45권1호
• /
• pp.50-55
• /
• 2008

본 논문에서는 $0.35-{\mu}m$ CMOS 공정을 이용 $8{\sim}10.9$ GHz 밴드를 갖는 새로운 구조의 LC VCO를 설계 제안하였다. 이 회로 구성은 LC 탱크 기반의 전형적인 NMOS, PMOS cross-coupled 쌍을 병렬로 구성한 새로운 구조로 상보적인 NMOS와 PMOS 꼬리 전류와 같은 MOS cross-coupled쌍과 출력 버퍼로 구성하였다. 본 논문에서 제시한 구조로 설계된 LC VCO는 8GHz에서 10.9GHz까지로 29%의 증가된 튜닝 범위와 6.48mV의 낮은 전력소모를 가지는 것을 확인하였고 이의 core size는 $270{\mu}m{\times}340{\mu}m$, 시뮬레이션을 통한 VCO의 위상잡음은 1MHz와 10MHz offset에서 각각 -117dBc/Hz와 -137dBc/Hz이다. FOM은 10GHz의 중심 주파수으로 부터 1MHz offset에서 -189dBc/Hz를 가진다. 제안한 설계방법은 10Gb/s급의 클럭과 데이터 복원회로 그리고 SONET 통신응용에 매우 유용하다.

• 한국통신학회논문지
• /
• 제27권2C호
• /
• pp.191-200
• /
• 2002

본 논문에서는 이중 루프 PLL을 이용한 IMT-2000용 주파수 합성기를 설계 및 제작하였다. 위상잡음 특성을 개선하기 위해서 기준 루프와 두 개의 루프로 나누고 기준루프에는 변형 클램프 형태의 전압제어 발진기와 루프 필터를 최적화 함으로서 위상잡음을 개선하고 메인 루프에는 동축형 유전체 공진기를 사용한 전압제어 발진기와 위상 검출기로 SPD(Sampling Phase Detector)를 사용함으로서 분주기의 사용을 없애고 개루프 이득을 크게 함으로서 위상잡음 특성을 개선하였다. 이렇게 제작된 주파수 합성기는 1.81GHz의 중심주파수에 가변범위는 158.5MHz이고 위상잡음은 100kHz offset에서 -120..66dB로 우수한 특성을 나타내었다.