• Macromolecular Research
• /
• 제11권4호
• /
• pp.267-272
• /
• 2003

The isothermal cure reactions of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer (poly(dimmer acid-co-alkyl polyamine)) or PEI were studied using differential scanning calorimetry (DSC). Rheological measurements have been made to investigate the viscosity and mechanical relaxation behavior of the blends. The reaction rate and the final cure conversion were decreased with increasing the amount of thermoplastics in the blends. Lower values of final cure conversions in the epoxy/thermoplastic blends indicate that thermoplastics hinder the cure reaction between the epoxy and the curing agent. Complete miscibility was observed in the uncured blends of epoxy/thermoplastics up to $120^{\circ}C$ but phase separations occurred in the early stages of the curing process at higher temperatures than $120^{\circ}C$. According to the rheological measurement results, a rise of G' and G" at the onset of phase separation is seen. A rise of G' and G" is not observed for neat epoxy system since no phase separation is seen during cure reaction. At the onset of phase separation the rheological behavior was influenced by the amount of thermoplastics in the epoxy/thermoplastic blends, and the onset of phase separation can be detected by rheological measurements.

• Korean Chemical Engineering Research
• /
• 제47권1호
• /
• pp.46-53
• /
• 2009

본 연구에서는 비이온 계면활성제 $C_{12}E_5$ 수용액과 비극성 탄화수소 오일 시스템에 대한 상평형 및 동적 거동 실험을 수행하였다. 온도를 증가시킴에 따라 oil-in-water(O/W) microemulsion(${\mu}E$)이 excess 오일상과 평형을 이루는 2상 영역으로부터 middle-phase ${\mu}E$이 excess water, excess 오일상과 각각 평형을 이루는 3상 영역을 거쳐서 water-in-oil(W/O) ${\mu}E$이 excess 물상과 평형을 이루는 2상으로 전이되었다. 또한 탄화수소 오일의 사슬 길이가 증가할수록 상전이 온도가 증가하였다. O/W ${\mu}E$이 존재하는 낮은 온도 조건에서는 비극성 오일의 종류와 상관없이 오일이 계면활성제 마이셀에 의하여 가용화되어 시간에 따라 크기가 선형적으로 감소하였다. 한편 middle-phase ${\mu}E$을 포함한 3상이 형성되는 조건에서는 매우 낮은 계면장력으로 인하여 오일이 수용액 상에 빠른 속도로 가용화되었고 작은 drop 형태로 유화되었다. 반면에 W/O ${\mu}E$의 2상을 형성하는 온도에서는 과포화로 인하여 일어나는 자발적 유화 현상과 물과 계면활성제의 오일상으로의 확산으로 인한 오일의 크기가 증가하였다. 비극성 탄화수소 오일과 계면활성제 수용액 사이의 시간에 따른 계면장력을 $25^{\circ}C$에서 측정한 결과, 탄화수소 오일의 사슬 길이가 증가함에 따라 평형에서의 계면장력 값과 평형에 도달하는데 소요되는 시간이 모두 증가하였다.

• 공업화학
• /
• 제20권5호
• /
• pp.473-478
• /
• 2009

본 연구에서는 $C_{10}E_5$ 비이온 계면활성제 수용액과 비극성 탄화수소 오일 시스템에 대한 상평형 및 동적 거동 실험을 수행하였다. 온도를 증가시킴에 따라 oil in water (O/W) microemulsion (${\mu}E$)이 excess 오일상과 평형을 이루는 2상 영역으로부터 middle-phase ${\mu}E$이 excess water, excess 오일상과 각각 평형을 이루는 3상 영역을 거쳐서 water in oil (W/O)${\mu}E$이 excess 물상과 평형을 이루는 2상으로 전이되었다. 또한 탄화수소 오일의 사슬 길이가 증가할수록 상전이 온도가 증가하였다. O/W ${\mu}E$이 존재하는 낮은 온도 조건에서는 비극성 오일의 종류와 상관없이 오일이 계면활성제 마이셀에 의하여 가용화되어 시간에 따라 크기가 선형적으로 감소하였고, 가용화 속도는 탄화수소 오일의 사슬 길이를 증가시킴에 따라서 감소하였다. 한편 middle-phase ${\mu}E$을 포함한 3상이 형성되는 조건에서는 매우 낮은 계면장력으로 인하여 오일이 수용액 상에 빠른 속도로 가용화되었고 작은 drop 형태로 유화되었다. 반면에 W/O ${\mu}E$의 2상을 형성하는 온도에서는 과포화로 인하여 일어나는 자발적 유화 현상과 물과 계면활성제의 오일상으로의 확산으로 인한 오일의 크기 증가가 관찰되었다. 비극성 탄화수소 오일과 계면활성제 수용액 사이의 시간에 따른 계면장력을 $25^{\circ}C$에서 측정한 결과, 탄화수소 오일의 사슬 길이 증가에 따라 평형에서의 계면장력 값과 평형에 도달하는 데 소요되는 시간이 모두 증가하였다.

• 한국분말재료학회지
• /
• 제11권1호
• /
• pp.55-59
• /
• 2004

TiNi bodies were produced from (Ti＋Ni) powder mixture by spark-plasma sintering procerg. The sintering behavior was investigated through the measurement of change in density, densification rate, phase analysis and microstructure. Irrespective of heating rate, sintered bodies with above 97％ relative density could be obtained. TiNi with B2 structure was confirmed as the major phase and $Ti_2Ni,\;TiNi_3$, unreacted Ti, Ni as the second phase. Increase in heating rate suppressed a formation of intermediate phase during sintering process. Increase in holding time at sintering temperature led to a compositional homogenization.

• Elastomers and Composites
• /
• 제38권1호
• /
• pp.51-56
• /
• 2003

Cloud-point and bubble-point data to $170^{\circ}C$ and 50 bar are presented for four different solvents, normal pentane. n-hexane, n-heptane, and n-octane with poly(ethylene-co-42 wt% octene) ($PEO_{42}$) copolymer. The pressure-concentration isotherms measured for $PEO_{42}$ - normal pentane have maximums at around 5 wt% of the copolymer concentrations in the solution. $PEO_{42}$- normal pentane system exhibits LCST-type phase behavior at temperatures greater than $130^{\circ}C$. Below $120^{\circ}C$, bubble-point type transitions are observed. However, the binary mixtures for $PEO_{42}$ in n-hexane, n-heptane, and n-octane have only bubble-point type transitions at the pressure-temperature region investigated in this study. The single-phase region of PEO - alkane mixtures increases with the molecular size of alkane solvent due to the increasing dispersion interactions between PEO and the alkane.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.124-128
• /
• 1997

An attempt was made to understand the dissolution and reprecipitation behavior of the constituent phases such as TiC, TiN, and Ti(CN) in TiC-TiN-Ni system. During the liquid-phase sintering the TiC phase was found to dissolve preferentially in Ni binder. The solid-solution phase, Ti(CN), formed around the TiN phase, resulting in a core/rim structure. This result was reproduced when large TiC particles were used with fine TiN particles. The path for the microstructural change in TiC-TiN-Ni system was largely controlled by the difference in the interfacial energy of each phase with the liquid binder phase. The results were discussed with thermodynamic principles.

• 한국전자통신학회논문지
• /
• 제8권11호
• /
• pp.1691-1696
• /
• 2013

본 논문에서는 순환형 하이브리드 초소형 에너지 수확장치 장치에서 존재하는 거동해석을 수행한다. 이 거동해석은 더 많은 에너지를 생산하기 위해서 비선형 시스템이 요구되므로 비선형 시스템의 존재 유무를 확인하는 것이다. 이를 위해 먼저 타켄스의 매립법을 통한 위상 공간을 재구성한다. 또한 위상 공간을 이용하여 포엔카래 맵을 구성하고 리아프노프 지수를 구하여 분석한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.149-152
• /
• 2006

Dry sliding wear behavior of low carbon dual phase steel, of which microstructure consists of hard martensite in a ductile ferrite matrix, has been investigated. The wear characteristics of the dual phase steel was compared with that of a plain carbon steel which was normalized at $950^{\circ}C$ for 30min and then air-cooled. Dry sliding wear tests were carried out using a pin-on-disk type tester at various loads of 1N to 10N under a constant sliding speed condition of 0.2m/sec against an AISI 52100 bearing steel ball at room temperature. The sliding distance was fixed as 1000m for all wear tests. The wear rate was calculated by dividing the weight loss measured to the accuracy of $10^{-5}g$ by the specific gravity and sliding distance. The worn surfaces and wear debris were analyzed by SEM, EDS and a profilomter. Micro vickers hardness values of the cross section of worn surface were measured to analyze strain hardening behavior underneath the wearing surfaces. The were rate of the dual phase steel was lower than the plain carbon steel. Oxidation on the sliding surface and strain hardening were attributed for the higher wear resistance of the dual phase steel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.573-573
• /
• 2012

High quality $VO_2$ thin films were successfully grown on GaN substrate by optimizing oxygen partial pressure during the growth using RF sputtering technique. The $VO_2$ thin film grown on GaN substrate exhibited an unusual metal insulator transition behavior, which was known to be observed only either in doped sample or under uniaxial stress. Raman spectra also confirmed that metal insulator transition occurred from monoclinic M1 to rutile R phase via monoclinic M2 phase with increasing temperature. We believe that large lattice mismatch between $VO_2$ and GaN substrate may cause M2 phase to be thermodynamically stable. Optical transmittance and its electrical switching behavior were carefully investigated to elucidate the underlying physics of its metal insulator transition behavior. This study may lead to a unique opportunity to better understand the growth mechanism of M2 phase dominant $VO_2$ thin films.

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.510-514
• /
• 1993

The retention behavior of proteins was investigated by using reversed-phase chromatography (RPC), comparing to the retention behavior of small molecules in RPC. The evaluation was carried out on a SynChropak RP-P($C_{18}$) column with 0.1% aq. TFA-organic solvent modifier such as acetonitrile, isopropanol, and ethanol. The Z value (the number of solvent molecules required to displace the solute from the surface) was a general index for the characterization of protein retention as a function of organic concentration over a range of temperature between 5 and 70$^{\circ}C$. Van't Hoff plots provided the basis for evaluating the enthalpic and entropic changes associated with the interaction between protein and the stationary phase. Z values did not change significantly at the range of temperature showing the consistent ${\Delta}H^{\circ}$ and ${\Delta}S^{\circ}$ values. From these investigation, it was concluded that the retention behavior of proteins in RPC was able to be predicted by the retention parameters applied to small molecules. Furthermore, myoglobin and hemoglobin in RPC as stated above showed a similar retention behavior regardless of their molecular weights.