• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.688-700
• /
• 2013

하수 슬러지로부터 추출된 유지를 이용하여 바이오디젤 생산에 대해 고찰하였다. 바이오디젤 생산의 밝은 전망에도 불구하고, 이를 상용화하기 위한 노력은 매우 제한되어 있다. 주요 장애물 중 하나는 전체 생산비용의 약 70~75%를 구성하는 정제 유지의 공급 원료와 연관된 높은 가격이다. 따라서 이를 극복하기 위하여 폐유나 낮은 품질 유지 등의 저가 원료를 사용하여 바이오디젤의 생산 비용을 낮추는 기술이 제안되어 왔다. 이런 측면에서 하수 슬러지로부터 추출된 유지는 비교적 저렴하여 유망한 원료로 평가받고 있다. 본 연구에서는 하수 슬러지로부터 추출된 유지를 이용한 바이오디젤의 생산기술을 검토하였다. 하수 슬러지로부터 유지 추출공정 및 에스테르화 전환공정 및 무촉매 열화학 전환공정을 살펴보았다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제10권S_2호
• /
• pp.73-77
• /
• 2001

The disposal of sewage sludge using landfills and ocean dumping is no longer a viable option due to land scarcity and increasingly stringent environmental control regulations. As such, various efforts have been made to develop new sewage sludge recycling technologies. This work investigates the fundamental physical and chemical characteristics of rural type sewage sludge from Chungnam province in South Korea. The average moisture content, ignition loss, elementary analysis, and average heating value of the sewage sludge samples were examined. The average moisture content of the dewatered sludge was about 80%, while the organic matter was about 50% of the total solid sludge weight. The average heating value of a sewage sludge and petroleum coke waste mixture(1:1 weight ratio) was about 5,000 ㎉/kg, thereby indicating a high potential for energy recycling.

• 대한화학회지
• /
• 제55권5호
• /
• pp.842-845
• /
• 2011

Wet air oxidation (WAO) of oily sludge was carried out using $Fe^{3+}$ as catalyst, placed in a 0.5 L batch autoclave in the temperature range of $250-330^{\circ}C$. Experiments were conducted to investigate the effects of temperature, the initial COD, reaction time, concentration of catalyst and $O_2$ excess (OE) on the oxidation of the oily sludge. The results showed that in the WAO 88.4% COD was achieved after 9 min reaction at temperature of $330^{\circ}C$, OE of 0.8 and the initial COD of 20000 mg/L. Temperature was found to have a significant impact on the oxidation of oily sludge. Adding a catalyst significantly improved the COD removal. Homogenous catalyst, $Fe^{3+}$, showed effective removal for pollutants. COD removal was 99.7% in the catalytic wet air oxidation (CWAO) over $Fe^{3+}$ catalyst. The results proved that the CWAO was an effective pretreatment method for the oily sludge.

• Journal of Microbiology and Biotechnology
• /
• 제16권2호
• /
• pp.200-204
• /
• 2006

The enzymology of an activated sludge system for a petroleum wastewater purification process was investigated. Leucine-aminopeptidase (L-AMP), ${\beta}$-glucosidase (${\beta}-GLC$), and lipase (LIP) were selected for the study. It was found that more than 81.7% of enzymatic activity was associated with microbial cells in the activated sludge floc. The metabolic response of a mixed microbial population to increased phenol concentration showed that L-AMP activity increased in the activated sludge, whereas activities of ${\beta}-GLC$ and LIP decreased, due to the inhibitory effect of the phenol which varied from 100 mg/l to 500 mg/l.

• 한국응용과학기술학회지
• /
• 제35권2호
• /
• pp.540-559
• /
• 2018

액상 바이오연료를 생산할 수 있는 하수슬러지는 자국의 에너지 안보와 지속가능한 생산이 가능하고 경제적인 원료로 여겨지고 있다. 열화학적 기술은 하수슬러지를 에너지화, 연료화할 수 있는 가장 효과적인 방법이다. 일반적으로 하수슬러지는 수분 함량이 80% 이상으로 높은 금속 함량과 14 ~ 20 MJ/kg의 발열량을 갖고 있다. 본 논문에서는 하수슬러지를 활용한 액상 바이오연료를 생산하는 열분해 반응, 전이에스테르화 반응, 초임계 반응 기술에 대해 살펴보고자 한다. 또한, 하수슬러지 유래 액상 바이오연료의 연료적 특성과 액상 바이오연료와 관련한 국내 법에 대해 검토하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.207-210
• /
• 2004

Effect of electron accepters on anaerobic degradation of petroleum hydrocarbons by an anaerobic sludge taken from a sludge digestion tank in a soil artificially contaminated with 10,000 mg/kg soil of diesel fuel was tested. Treatments of soil with 30 mL of the digestion sludge (2,000 mg/L of vss (volatile suspended solids)) were incubated under several anaerobic conditions including nitrate reducing, sulfate reducing, methanogenic, and mixed electron accepters conditions for 120 days. Treatments with the digested sludge showed significant degradation of diesel fuel under all anaerobic conditions compare to control treatments with an autoclaved sludge and without the sludge. The amount of TPH degradation after 120days incubation was the largest in the treatment with the sludge and mixed electron accepters (75% removal of TPH) followed in order by sulfate reducing, nitrate reducing, methanegenic condition as 67%, 53％, 43%, respectively. However, the rate of TPH degradation in the nitrate- and sulfate reducing condition within 105 days were comparable with that of the mixed electron accepters condition. Microorganisms in each electron acceptor condition were plated on solid mediums containing nitrate or sulfate as sole electron acceptor and several nitrate- and sulfate reducing bacteria showed effective degradation of diesel fuel within 30 days incubations. These results suggest that anaerobic degradation of diesel fuel in soil with digested sludge is effective for practical remediation of soil contaminated with petroleum hydrocarbons.

• 대한환경공학회지
• /
• 제29권8호
• /
• pp.938-943
• /
• 2007

혐기성 소화조 슬러지 주입에 의한 디젤오염(10,000 mg/kg soil) 토양 내 석유계 탄화수소의 혐기성 분해에 관하여 조사하였다. 오염된 토양 50 g에 총휘발성 고형물 농도 2,000 mg/L인 소화조 슬러지를 15 mL/kg soil와 30 mL/kg soil 농도로 주입하고 90일간 배양한 결과, 각각 37.2%와 58.0%의 총석유계 탄화수소(TPH)의 분해율을 나타내었다. 슬러지를 주입하지 않은 오염토양 대조군과 멸균된 토양에 멸균된 슬러지를 주입한 대조군에서는 120일간의 배양에서 초기 첨가한 디젤의 17%와 4%가 각각 제거된 것에 비하여, 전자수용체의 종류를 달리한 여러 혐기성 조건, 즉, 질산염 환원 조건, 황산염 환원 조건, 메탄생성 조건, 혼합 전자수용체 조건 모두에서 소화조 슬러지 주입에 의해 토양 내 디젤의 40% 이상이 분해됨을 확인할 수 있었다. 배양 120일 동안의 오염토양 내 TPH의 분해율은 혼합 전자수용체 조건에서 75%로 가장 높았으며, 황산염 환원 조건(67%), 질산염 환원 조건(13%), 메탄생성 조건(43%) 순으로 나타났다. 그러나 난분해성 물질로 알려진 isoprenoid의 분해율은 황산염 환원 조건이 다른 전자수용체 조건에 비해 가장 높은 분해율을 나타내었다. 본 연구 결과를 통하여, 소화조 슬러지를 이용하여 혐기성 상태에서 오염토양 내 디젤을 분해하는 기술은 석유계 탄화수소로 오염된 토양의 실질적인 복원에 유용한 것으로 판단되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.131-134
• /
• 2004

Several physical and chemical methods have been used for remediation contaminated by oils. However the cost was very high and secondary pollution rose during treating. The purpose of this study was to comprision TPH (total petroleum hydrocarbon) removal from artificially contaminated soil by diesel with and without seeding anaerobic digested sludge. After 120 days of overall at 35$^{\circ}C$, removal efficiency of TPH with seeding sludge was 2-3 times higher than blank. Also, the more amount seeding sludge, TPH removal efficiency and CH$_4$ content more obtained. It was sad that seeding of anaerobic digested sludge was a good method for enhancing TPH removal efficiency without increasing operating cost. Sulfate, nitrate-reducing, methanogenic condition were evaluated for alkane, isoprenoid as target contaminated soil.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.