• 한국경제지리학회지
• /
• 제5권1호
• /
• pp.5-24
• /
• 2002

본 연구는 경질제품의 유통구조와 물류체계를 공간적 관점에서 분석하였다. 석유제품은 정유사, 대리점, 주유소의 유통기관들을 통해서 공급되지만, 제품의 특성과 용도별로 상이한 유통경로를 갖고 있다. 석유제품의 수송은 정유공장에서 주요 소비지역에 입지하고 있는 저유소까지의 1차 수송과 주유소로부터 주유소나 중소수요처까지의 2차 수송으로 이루어진다. 1차 수송에는 유조선, 유조화차, 송유관, 유조차가 이용되고, 대리점이나 수송용역 업체가 담당하는 2차 수송은 대부분 유조차가 수송을 전담하고 있다. 본 논문에서는 SK와 LG 정유사의 저유소 분포와 저유소 유형별 공급권역을 분석하였다. 또한 하나의 저유소가 관할하는 공급권역내에 포함된 인구수와 자동차수, 주유소수를 도출하였고, 이를 바탕으로 하나의 주유소가 공급을 담당하는 최소요구치 수요인 인구수와 자동차수를 산출하였다.

• 공업화학
• /
• 제27권5호
• /
• pp.546-550
• /
• 2016

국내 토양오염의 60~70% 이상이 석유제품에 의한 오염이며, 석유제품에 의해 토양오염이 발생될 경우, 토양환경보전법 상 B T E X와 total petroleum hydrocarbon (TPH)를 분석하도록 명시하고 있다. 본 연구에서는 국내 유통 중인 석유제품에 대한 구간별 TPH 패턴을 분석하였다. 또한 $C_8{\sim}C_{40}$ 구간만을 분석하는 현행 토양오염공정시험기준의 문제점을 보완하여 석유제품 내 TPH를 정량분석 하였다. 분석결과, 토양오염공정시험기준 분석조건으로 분석한 결과값과 보완된 분석방법을 이용했을 시, 휘발유와 용제 1호 같은 저비점 유류의 경우, 최대 85%의 차이가 발생하는 것을 확인하였다.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1073-1080
• /
• 2018

연료유로 사용되는 석유제품은 각각의 품질기준, 등급, 사용용도에 따라 여러 종류가 있다. 국가별로 유류에 세금을 부과하는 정도에 따라 동일한 석유제품이라 하더라도 가격차이가 발생한다. 가격이 저렴한 비과세의 석유제품을 상대적으로 고가인 수송용 연료에 불법적으로 혼합하는 행위로 인하여 탈세, 환경오염, 차량고장 등의 문제가 발생한다. 이러한 석유제품간 불법 혼합을 방지하기 위해 특정 석유제품에 미량의 식별제(Marker)를 법적으로 첨가하고 있다. 국내에서는 가정용 및 상업용 연료로 사용되는 등유를 자동차용 경유에 불법적으로 혼합하는 행위를 방지하기 위하여 식별제를 도입하여 사용하고 있으며, UV-Vis 분광광도계나 HPLC를 이용하여 식별제 함량을 정량적으로 분석하고 있다. 본 연구에서는 기존에 식별제 함량 분석을 위해 발색제를 첨가하거나 시료를 전처리하는 조작없이 GC-MS로 석유제품에 첨가된 식별제를 정성적 및 정량적으로 분석하는 방법을 개발하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권1호
• /
• pp.13-17
• /
• 2017

Over 30% of domestic soil contamination has occurred via petroleum products and complex oil. Moreover, contamination by complex oil is more intense than it is by a single petroleum product species. In this study, we analyzed sectional TPH (total petroleum hydrocarbon) pattern and sectional ratio of current domestically distributed petroleum products, such as kerosene, diesel, bunker C, and lubricant and complex oils, to determine pollution characteristics of the soil. In the TPH pattern, kerosene, which is a light distillate, had an early retention time, and lubricant oil, which is a heavy distillate, had a late retention time in the gas chromatogram. In addition, we obtained a complexly contaminated soil via diesel and lubricant oil from the Navy and inspected it for its ratio of complex oil species. The inspection results showed that this soil was contaminated with 85% diesel and 15% lubricant oil. The method developed in this study could be used to determine complex petroleum sources and ratios at sites with accidentally contaminated soil.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1277-1283
• /
• 2021

It is important for operators of poly-pipelines in petroleum industry to continuously monitor characteristics of transferred fluid such as its type and amount. To achieve this aim, in this study a dual energy gamma attenuation technique in combination with artificial neural network (ANN) is proposed to simultaneously determine type and amount of four different petroleum by-products. The detection system is composed of a dual energy gamma source, including americium-241 and barium-133 radioisotopes, and one 2.54 cm × 2.54 cm sodium iodide detector for recording the transmitted photons. Two signals recorded in transmission detector, namely the counts under photo peak of Americium-241 with energy of 59.5 keV and the counts under photo peak of Barium-133 with energy of 356 keV, were applied to the ANN as the two inputs and volume percentages of petroleum by-products were assigned as the outputs.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제24권1호
• /
• pp.17-23
• /
• 2019

Clean soil environment is of crucial importance to sustain lives of ecosystem and humans. With rapid industrialization, there has been a great increase of soil contamination by accidental releases of petroleum products. In general, soil remediation is an expensive and time-consuming process as compared to cleanup of water and air. Moreover, determining the source and responsible parties of soil pollution often turns into legal conflicts and that further delay the cleanup process of contaminated sites. In practice, total petroleum hydrocarbon (TPH) analysis has been employed to determine the petroleum species and to track down the responsible polluters. However, this approach often suffers from differentiating similar TPH species. In this study, we analyzed TPH chromatogram patterns of 24 domestic petroleum products in specific carbon ranges (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) and the fractional changes of THP ratio in the mixture products of gasoline, kerosene and diesel. The proposed TPH analysis method in this study could serve as a useful tool to better analyze the petroleum species in soils contaminated with complex oil mixtures, and ultimately be used to identify the polluters of soil.

• Tribology and Lubricants
• /
• 제33권6호
• /
• pp.263-268
• /
• 2017

The significance of maintaining the soil environment is gradually increasing owing to soil and underground water contamination by petroleum leak accidents. However, the purification of soil is an expensive and more time-consuming process than the purification of contaminated water and air. Moreover, determining the source and people responsible for soil pollution gets often embroiled in legal conflicts, further delaying the cleanup process of the contaminate site. Generally, TPH (total petroleum hydrocarbon) pattern analysis is used to determine the petroleum species and polluter responsible for soil contamination. However, this process has limited application for petroleum products with a similar TPH pattern. In this study, we analyze the TPH pattern and specific sectional ratio (${\sim}C_{10}$, $C_{10}-C_{12}$, $C_{12}-C_{36}$, and $C_{36}{\sim}$) of various domestic petroleum products to identify the petroleum product responsible for soil contamination. Also, we perform BTEX (benzene, toluene, ethyl benzene, xylene) quantitative analysis and determine B:T:E:X ratio using GC-MS. The results show that gasoline grade 1 and 2 have a similar TPH pattern but different BTEX values and ratios. This means that BTEX analysis can be used as a new method to purify soil pollution. This complementary TPH and BTEX method proposed in this study can be used to identify the petroleum species and polluters present in the contaminated soil.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1021-1025
• /
• 1999

Near-infrared (NIR) spectroscopy has been successfully utilized for the rapid identification of six typical petroleum products such as light straight-run (LSR), naphtha, kerosine, light gas oil (LGO), gasoline, and diesel. The spectral features of each product were reasonably differentiated in the NIR region, and the spectral differences provided enough qualitative spectral information for discrimination. For discrimination, principal component analysis (PCA) combined with Mahalanobis distance was used to identify each petroleum product from NIR spectra. The results showed that each product was accurately identified with an accuracy over 95%. Most noticeably, LSR, kerosine, gasoline, and diesel samples were predicted with identification accuracy of 99%. The overall results ensure that a portable NIR instrument combined with a multivariate qualitative discrimination method can be efficiently utilized for rapid and simple identification of petroleum products. This is especially important when local at-site measurements are necessary, such as accidental petroleum leakage and regulation of illegal product blending.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.1112-1120
• /
• 2017

석유제품은 다양한 형태의 탄화수소화합물로 구성되어진 화합물로, 다른 종류의 액체류와 마찬가지로 온도변화에 따른 밀도와 부피의 변화가 발생한다. 액상에서 석유제품의 밀도를 측정하는 방법은 분별 증류된 각 석유제품에 대해 주로 얻어진 실험 데이터를 기반으로 한다. 본 연구에서는 등유와 자동차용 경유의 온도변화에 따른 밀도와 부피변화를 실제 측정하여 온도변화에 따른 변화추이를 분석하고, 국제규격인 ASTM에서 제시하는 밀도부피 환산표를 이용한 환산값을 계산하고 두 값을 비교분석하였다. 또한, 국내 계량 관련법에서 규정하고 있는 온도변화에 대한 기준과 실측값과의 상호 비교를 통해 차이점을 분석하였다.

• Tribology and Lubricants
• /
• 제36권3호
• /
• pp.161-167
• /
• 2020

Petroleum is the most used energy source in Korea with a usage rate of 39.5% among the available 1st energy source. The price of liquid petroleum products in Korea includes a lot of tax such as transportation·environment·energy tax. Thus, illegal production and distribution of liquid petroleum is widespread because of its huge price difference, including its tax-free nature, from that of the normal product. Generally, illegal petroleum product is produced by illegally mixing liquid petroleum with other similar petroleum alternatives. In such case, it is easy to distinguish whether the product is illegal by analyzing its physical properties and typical components. However, if one the components of original petroleum product is added to illegal petroleum, distinguishing between the two petroleum products will be difficult. In this research, we inspect illegally produced gasoline, which is mixed with methyl tertiary butyl ether (MTBE) as an octane booster. This illegal gasoline shows a high octane number and oxygen content. Further, we analyze the different types of green dyes used in illegal gasoline through high performance liquid chromatography (HPLC). We conduct component analyses on the simulated sample obtained from premium gasoline and MTBE. Finally, the illegal gasoline is defined as premium gasoline with 10% MTBE. The findings of this study suggest that illegal petroleum can be identified through an analytic method of components and simulated samples.