• Vending industry
• /
• v.10 no.2 s.31
• /
• pp.52-55
• /
• 2011

흔희 일본을 자판기 천국이라 말하지만 더 정확이 말하면 청량음료자판기 천국이다. 캔이나 PET 병 등 다양한 용기의 청량음료를 판매하는 자판기가 무려 260만대 설치되어 있다. 이토록 많은 청량음료 자판기가 설치되어 있다 보니 사회적인 책임도 크다. 자판기의 편리성, 환경, 치안, 도난 방지 등에 있어 사회를 위해 반드시 수행해야 기능들이 있다. 이 기능들을 개별업체에 맡겨 놓기에는 무리가 있다. 기업은 아래도 영리를 중시하는 경향이 있다 보니 사회적 책임에 관계된 일은 단체에서 진행을 해야 구속력과 추진력이 생긴다. 그래서 일본에는 청량음료자판기협의회가 있다. 일본자판기 관련 4개 단체(일본자동판매기공업회, 전국청량음료공업회, 일본자동판매협회, 일본자동판매기보안장비 협회)가 사회적 책임을 위해 공동 목표를 세우고 보조를 맞추어 나간다. 최근 이 단체의 활동은 자판기의 편리성 향상, 환경대응, 안심 안전한 거리 환경 조성에 맞추어져 있다. 그들이 지향하는 사회적 책임 활동 지켜보는 것은 의미가 크다. 우리 자판기 산업의 먼 장래도일본의 전례를 따라가지 않을 수 없는 상황이 될테니까. 자판기의 비중과 역할이 증대될수록 어느 시점에서는 반드시 사회적 책임이 동반되게 마련이다. 이런 측면에서 청료음료자판기협의회 활동을 소개한다. 국내 관련 업체들도 이제 자판기의 사회적 책임 강황에 관심을 가져야 할 시점이다.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.545-549
• /
• 2003

Dyeing properties such as migration of disperse dye and color fastness of 4 types of the carrier[Carrier-I(methyl napthalene). Carrier-II(chloro benzene). Carrier-III(aromatic ether) and Carrier-IV(o-phenyl phenol)] were evaluated for the study. For the results, the optimum dyeing time and concentration of the carrier was 30min at $110^{\circ}C$ and 2g/l, respectively. The redyeing ratio of the fabric samples treated with Carrier-II and III was higher than that treated with Carrier-I and IV, thus, if was conclude that the redyeing ratio of the samples treated with Carrier-II and III was excellent. The light fastness of the samples treated with Carrier-III and IV was higher than that of Carrier-I and II in order of 2-4 grades. However, there were little changes in terms of washing and sublimation and rubbing fastness for the samples.

• Journal of Fashion Business
• /
• v.7 no.6
• /
• pp.50-56
• /
• 2003

Chitosan has been widely applied to the products in various industries such as textile fabrics, apparels, foods, medical area, etc. Cochineal has long been employed as one of natural dyestuffs in the textile industry. The effect of chitosan pre-treatment on the low-stress physical and mechanical properties of cochineal-dyed fabrics including cotton, silk, nylon and polyester fabrics was investigated in this study. The chitosan treatment and mordanting of the fabrics changed the bending, shear, compression, and surface properties of the fabrics. In cotton fabric specimens, while the increase of B(bending rigidity) of cotton is relatively high, the increase of G(shear rigidity) of cotton is relatively low. In nylon and PET fabric specimens, while the increase tendency of B is relatively low, that of G is high compared to the corresponding cotton fabrics.

• Journal of Korea Multimedia Society
• /
• v.24 no.4
• /
• pp.519-527
• /
• 2021

Alzheimer's disease is one of the challenges to tackle in the coming aging era and is attempting to diagnose and predict through various biomarkers. While the application of various deep learning-based technologies as powerful imaging technologies has recently expanded across the medical industry, empirical design is not easy because there are various deep earning neural networks architecture and categorical hyperparameters that rely on problems and data to solve. In this paper, we show the possibility of optimizing a deep learning neural network structure and hyperparameters for Alzheimer's disease classification in amyloid brain images in a representative deep earning neural networks architecture using genetic algorithms. It was observed that the optimal deep learning neural network structure and hyperparameter were chosen as the values of the experiment were converging.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.242-247
• /
• 2022

This study analyzes the servicescape of a dog-friendly hotel, which is the most important element of travel with a dog, which is increasing as the types of families diversify, and intends to suggest implications for servicescape strategies to enhance competitiveness in the future. The number of households with companion animals is increasing in line with the aging of the population, changes in the demographic structure due to the rapid increase in single-person households, and increase in income. In order to successfully operate a hotel with companion animals, which cannot have all the facilities like a large hotel, we would like to segment the market according to the user's pursuit of convenience and propose an appropriate servicescape design method.

• Composites Research
• /
• v.31 no.4
• /
• pp.122-127
• /
• 2018

Sandwich composites of carbon fiber reinforced plastic(CFRP) and polymer foam will be used to automobile and aerospace industry according to increasing importance of light weight. In this study, mechanical and heat resistance properties of sandwich composites were compared with type of polymer foam (polyethylene terephthalate(PET), polyvinylchloride(PVC), epoxy and polyurethane). All types of polymer foams were degraded to 30, 60, 120, 180 minutes in $180^{\circ}C$. After heat degradation, the polymer foams were observed using optical microscope and compressive test was performed using universal testing machine(UTM). Epoxy foam had the highest compressive property to 2.6 MPa and after thermal degradation, the mechanical property and structure of foam were less changed than others. Epoxy foam had better mechanical properties than other polymer foams under high temperature. Because the epoxy foam was post cured under high temperature. As the results, Epoxy foam was optimal materials to apply to structures that thermal energy was loaded constantly.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.303-314
• /
• 2021

With the high quality/high stiffness/high strength of segment lining, segment lining is increasingly used as the final lining of the tunnel. Precast concrete lining has higher quality and strength than field concrete. Paradoxically, this contributes to greater damage to concrete in the event of a fire in a tunnel. In this study, tests were conducted to determine the fire resistance performance of segment linings according to fiber content in fire resistance methods using synthetic fibers such as PP fibers. As a result, it was confirmed that fire resistance performance required by the relevant project can be secured when using 1.5 kg/m³ of PP fiber. In addition, comparison of the results of PP fibers with PET, a similar synthetic fiber, showed better fire resistance performance than when PP fibers were used.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.248-252
• /
• 2022

The environment refers to what is surrounded by something during human life. This environment is related to the way humans live, and presents various problems on how to perceive the surrounding environment and how the behaviors that constitute the environment support the elements necessary for human life. Humans have an interest in the supportability of the environment as the interrelationship increases as humans perceive and understand the environment and accept the factors supported by the environment. In space, human movement starts from one space to the next and exchanges stimuli and reactions with the environment until reaching a target point. These human movements start with subjective judgment and during gait movement, the spatial environment surrounding humans becomes a collection of information necessary for humans and gives stimulation. will do. In this process, in particular, humans move along the movement path through movement in space and go through displacement perception and psychological changes, and recognize a series of spatial continuity. An image of thinking is formed[1]. In this process, spatial experience is perceived through the process of filtering by the senses in the real space, and the result of cognition is added through the process of subjective change accompanied by memory and knowledge, resulting in human movement. As such, the spatial search behavior begins with a series of perceptual and cognitive behaviors that arise in the process of human beings trying to read meaning from objects in the environment. Here, cognition includes the psychological process of sorting out and judging what the information is in the process of reading the meaning of the external environment, conditions, and material composition, and perception is the process of accepting information as the first step. It can be said to be the cognitive ability to read the meaning of the environment given to humans. Therefore, if we can grasp the perception of space while moving and human behavior as a response to perception, it will be possible to predict how to grasp it from a human point of view in a space that does not exist. Modern people have the theme of reminiscing dog-friendly hotels for the healing of petloss syndrome, and this thesis attempts to approach the life of companions.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.21-29
• /
• 2024

In the rapidly advancing information society, electronic devices, including smartphones and tablets, are increasingly digitized and equipped with high-performance features such as flexible displays. This study focused on optimizing the manufacturing process for Transparent Conductive Films (TCF) by using the cost-effective conductive polymer PEDOT and transparent substrate PET as alternatives to expensive materials in flexible display technology. The variables considered are production speed (m/min), coating maximum temperature (℃), and PEDOT supply speed (rpm), with surface resistivity (Ω/□) as the response parameter, using Response Surface Methodology (RSM). Optimization results indicate the ideal conditions for production: a speed of 22.16 m/min, coating temperature of 125.28℃, and PEDOT supply at 522.79 rpm. Statistical analysis validates the reliability of the results (F value: 18.37, P-value: < 0.0001, R²: 0.9430). Under optimal conditions, the predicted surface resistivity is 145.75 Ω/□, closely aligned with the experimental value of 142.97 Ω/□. Applying these findings to mass production processes is expected to enhance production yields and decrease defect rates compared to current practices. This research provides valuable insights for the advancement of flexible display manufacturing.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.5
• /
• pp.2375-2382
• /
• 2016

Cancer is a major health problem in Oman. It is reported that cancer incidence in Oman is the second highest after Saudi Arabia among Gulf Cooperation Council countries. Based on GLOBOCAN estimates, Oman is predicted to face an almost two-fold increase in cancer incidence in the period 2008-2020. However, cancer research in Oman is still in its infancy. This is due to the fact that medical institutions and infrastructure that play central roles in data collection and analysis are relatively new developments in Oman. We believe the country requires an organized plan and efforts to promote local cancer research. In this paper, we discuss current research progress in cancer diagnosis using machine learning techniques to optimize computer aided cancer detection and classification (CAD). We specifically discuss CAD using two major medical data, i.e., medical imaging and microarray gene expression profiling, because medical imaging like mammography, MRI, and PET have been widely used in Oman for assisting radiologists in early cancer diagnosis and microarray data have been proven to be a reliable source for differential diagnosis. We also discuss future cancer research directions and benefits to Oman economy for entering the cancer research and treatment business as it is a multi-billion dollar industry worldwide.