• 펄프종이기술
• /
• 제40권4호
• /
• pp.27-33
• /
• 2008

Polyethylene terephtahalate has been used in several areas such as fiber, film, bottle, and disposable products. Production of PET has been rapidly increasing these days. Since PET is a semi-permanent material, it has a non-biodegradable character in itself. Wasted PET products can cause serious environmental problems. Many countries around the world impose environmental legal restrictions over their abandonments. Many researches on the enviromental influence factors and treatment techniques of the wasted PET have been carried out. The main objective of this study is to develop a new sizing agent using recycling PET and improve its internal sizing effect. Dried powder of PET was used to make the modified PET. After extracting water-dispersible PET by subcritical hydrolysis, polyester resins have been extracted and triphenyl phosphate(TPP) has been added to obtain optimal internal sizing agent. It was found that the optimum dosage of TPP was 2% (per PET weight) and the hydrolysis temperature was independent on making the modified PET.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.813-818
• /
• 2009

Shear properties of plastic bottle film/plastic bottle film and plastic bottle film/granitic soil which were evaluated from static friction tests. The monotonic shear experiments were performed by using an tilt table apparatus and large direct shear device. The test results showed that the friction angle of each interface and the interface depended on the amount of normal stress, the type of the interface used. Therefore, the testing method should be determined carefully by considering the type of loads and normal stress expected in the field with using the materials installed in the site.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.203-208
• /
• 2009

Lacks of harmony of a person and machine according to productivity elevation pursuit is happened by enterprise common problem in Global competition age and productivity loss is caused being connected to worker's burden work. Burden work in PET bottle production Process which are arrangement, Packing, interior inspection is analyzed by Ergonomic analysis technique. REBA estimation point(10~11 points) means the high step of hazard on worker's burden. It is immediately required the improvement on the process. This thesis show you the improving methods like package, examination justice.

• 월간포장계
• /
• 통권350호
• /
• pp.67-71
• /
• 2022

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제45차 학술발표회
• /
• pp.29-29
• /
• 2011

폴리에스테르는 많은 분야에서 응용되어 사용되어지고 있으나 최근 더욱 우수한 물성이 각 분야에서 요구되어 지고 있다. Poly (ethylene naphthalate)(PEN)는 PET 주쇄의 벤젠고리에 나프탈렌으로 치환되어 강직성이 강화되어 PET보다 약 $50^{\circ}C$정도 높은 $T_g(117^{\circ}C)$와 $10^{\circ}C$정도 높은 $T_m(265^{\circ}C)$을 가져서 열적 안정성, 고강도와 저신도를 갖는다. PEN은 상대적으로 우수한 내열성과 환경호르몬을 포함하지 않아 인체에 무해하다는 이점 때문에 수유병이나 머그컵으로도 사용되어질 수 있다. 또한 탄산음료 용 bottle이나 맥주 bottle등은 높은 barrier성이 요구되어지기 때문에 PET에 비해 약 5배 높은 barrier 성을 가지는 PEN을 블렌드하여 사용하기도 한다. PEN의 내열성 및 기계적 강도를 더욱 우수하게 하고자 고분자 사슬을 가교할 수 있는데, 가교에는 열처리 또는 감마선, 전자선, 자외선 조사를 이용할 수 있는데 열에 의한 가교는 균일한 열전달과 고온이 필요하며 감마선 및 전자선 조사는 설비의 고비용과 방사선 노출 위험으로 인해 비친환경적이다. 반면에 자외선 조사법은 다루기 쉽고 비용이 적게 들고 친환경적인 장점을 가진다. 본 연구에서는 PEN film의 열안정성과 기계적 특성을 향상시키기 위해 자외선 조사를 이용하여 PEN film의 광가교를 수행하였다.

• 한국전문물리치료학회지
• /
• 제15권3호
• /
• pp.44-52
• /
• 2008

The purpose of this study was to investigate the effects of different objects and target location of dominant hand on the non-dominant hand movement kinematics in a bimanual reaching task. Fifteen right-handed volunteers were asked to reach from same starting point to the different target point of right and left hand with grasping the objects of different size. Independent variables were 1) three different object types (small mug cup, name pen, and PET bottle), and 2) three different target locations (shorter distance, same distance, and longer distance than the non-dominant hand) of the dominant hand. Dependent variables were movement time (MT), movement distance (MD), movement mean velocity ($MV_{mean}$), and movement peak velocity ($MV_{peak}$) of the non-dominant hand. Repeated measures two-way analysis of variance (ANOVA) was used to test for differences in the non-dominant hand movement kinematics during bimanual reaching. The results of this study were as follows: 1) MT of the non-dominant hand was increased significantly when traveling with grasping the mug cup and reaching the far target location, and was decreased significantly when traveling with grasping the PET bottle and reaching the near target location of the dominant hand. 2) MD of the non-dominant hand was significantly increased during reaching the far target location, and significantly decreased during reaching the near target location with dominant hand. 3) $MV_{mean}$ of the non-dominant hand was increased significantly when traveling with grasping the PET bottle, and was decreased significantly when traveling with grasping the mug cup of the dominant hand. Therefore, it can be concluded that the changes of the ipsilateral hand movement have influence on coupling of the contralateral hand movement in bimanual reaching.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.199-205
• /
• 2014

The knowledge on the migration of antimony (Sb) from PET bottles into the water is of greate concern. Antimony in all bottled water marketed in korea and in raw water was analyzed. The detection rate of antimony in total bottled water was 88 % and 100% in PET (Polyethylene terephthalate, PET), 55% in PC (Polycarbonate, PC) bottled water. 55% of raw water contained antimony. The average concentration of Sb in PET bottled water was $0.39{\mu}g/L$, higher than PC bottles ($0.20{\mu}g/L$) and the raw water ($0.22{\mu}g/L$). The migration of Sb into water that is stored in different conditions (room temperature, $45^{\circ}C$, and direct sunlight exposure) was investigated for 180 days. The migration tendency increased with the storage time and temperature. PET bottles showed a sharp increase of Sb concentration at $45^{\circ}C$, but there was no differences between the room temperature and sunlight exposure. The Sb migration in all simulated solution(deionized water, 4% acetic acid, and 20% ethanol) also increased with storage time and temperature. The Sb migration values ranged from 0.35 to $0.49{\mu}g/L$ in all simulated solution, which was far below the permissible korean migration level of $40{\mu}g/L$. There was a tendency that the number of re-use of a bottle and the amount of leaching were in inverse proportion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.797-800
• /
• 2008

시멘트 사용량을 줄이기 위한 방법으로 포졸란 반응재료들이 혼화재로 사용되고 있다. 우리나라 전역에 널리 매장되어 있는 황토는 친환경 재료로서, 포졸란 반응을 하는 활성황토는 콘크리트의 혼화재로 활용성이 증가하고 있다. 또한 PET보강섬유는 폐 PET병을 재활용하여 만든 친환경재료로서 콘크리트에 혼입되어 미세균열을 제어하는 역할을 한다. 하지만 보강섬유를 혼입한 콘크리트에 대한 연구는 아직도 미비한 실정이고 황토를 혼화재로 사용한 콘크리트의 경우 황토 혼화재의 포졸란 반응과 보강섬유의 보강효과가 복합적으로 나타날 것으로 판단된다. 따라서 본 연구에서는 황토와 PET보강섬유를 혼입한 콘크리트 거동 특성을 분석하기 위하여 건조수축 시험을 통해 황토와 PET보강섬유를 혼입한 콘크리트의 재료특성을 평가하였다.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.138-146
• /
• 2022

Research on the reduction of plastic use to prevent environmental pollution is urgently needed. Accordingly, studies on reducing the weight of polyethylene terephthalate (PET) bottles are currently being conducted. PET bottles are fabricated by injection stretch blow molding. In this study, stretch blow molding for fabricating PET bottles using preform studied through a computer simulation. Blowing characteristics are analyzed by varying the start time of the pre-blow, which is one of the process conditions of stretch blow molding. Simulation results and the preform inflation process are presented, and the parameters of stretch ratio, stretching path, thickness distribution, and weight distribution of blown PET bottles are investigated.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.79-87
• /
• 2004

폐 PET 병을 재활용하여 경량콘크리트용 잔골재로 활용하기 위하여 폐 PET 병 활용 경량골재(WPLA)의 품질 및 WPLA를 사용한 콘크리트(WPLAC)의 유동성, 단위용적 중량, 공기량 및 강도특성에 대하여 검토하였다. WPLA의 품질을 검토한 결과 WPLA를 $50\%$ 이하로 치환하는 것이 바람직하며, WPLA를 $50\%$ 치환한 경우 잔골재의 비중 및 흡수율이 강모래보다 각각 23 및 $75\%$ 정도 크게 감소하였으며, 콘크리트의 제물성에 크게 영향을 미쳤다. nU를 치환한 굳지 않은 콘크리트의 워커빌리티는 WPLA 치환율 및 물-시멘트비가 클수록 향상되었으며, 잔골재의 비중이 2.6에서 1.7로 감소함에 따라 콘크리트의 슬럼프 증가율은 약 $45 {\~} 120\%$로 나타났다. WPLA를 $75\%$치환한 콘크리트의 단위용적중량은 보통 콘크리트 보다 약 $17\%$ 정도 감소하였다. WPLA를 25 및 $50\%$ 치환한 콘크리트의 재령 28일 압축강도는 물-시멘트비 변화(W/E=B5 49 및 $53\%$)에 관계없이 30MPa를 상회하였으며, WPLA $25\%$ 치환 콘크리트의 비강도는 물-시멘트비 $49\%$에서 $15.11{\times}10^3 MPa{\cdot}m^3/kg$로 보통콘크리트보다 크게 나타났다. 재령 조일 압축강도, 인장강도 및 탄성계수와의 비는 일반 경량콘크리트와 비슷한 경향을 보였다. 이상의 결과로 WPLA를 경량 콘크리트용 잔골재로 활용하는 것이 가능하다고 판단된다.