• 한국물환경학회지
• /
• 제31권2호
• /
• pp.120-133
• /
• 2015

Due to increasing impervious surfaces resulting from urbanization and industrialization which are directly linked to urban inundation and non-point pollutants runoff, there is a need to manage them systematically. A management over urban impervious surfaces calls for pervious/impervious maps, which enable viewing the distribution of impervious surfaces. Nevertheless, relevant data are absent as now. In this respect, despite the diversity of proposed methods, pilot implementation and accuracy verification have never been conducted. Therefore, this study is aimed to produce a pilot pervious/impervious map based on previously proposed methods and to elucidate its pros and cons with a view to proposing a method for producing a GIS-based optimal pervious/impervious map. Following previously proposed methods, a pervious/impervious map of Bupyeong-gu, Incheon was produced. Then, a method of producing optimal pervious/impervious maps applicable to urban areas was proposed through the comparison of pros and cons of relevant spatial data. As a result, the map had been confirmed 99.2% of classification accuracy. Based on the present findings, future studies should establish a standardized method for producing. Also, this method should be used to produce pervious/impervious maps of other regions so that it can be applied to managing impervious surfaces in major urban areas nationwide.

• Computers and Concrete
• /
• 제21권6호
• /
• pp.623-635
• /
• 2018

In order to research the influence of different recycled aggregate contents on the mechanical properties of pervious concrete, the experimental study and numerical simulation analysis of the mechanical properties of pervious concrete with five kinds of recycled aggregates contents (0%, 25%, 50%, 75% and 100%) are carried out in this paper. The experimental test were first performed on concrete specimens of different sizes in order to determine the influence of recycled aggregate on the compressive strength and splitting tensile strength, direct tension strength and bending strength. Then, the development of the internal cracks of pervious concrete under different working conditions is studied more intuitively by $PFC^{3D}$. The experimental results show that the concrete compressive strength, tensile strength and bending strength decrease with the increase of the recycled aggregate contents. This trend of reduction is not only related to the brittleness of recycled aggregate concrete, but also to the weak viscosity of recycled aggregate and cement paste. It is found that the fracture surface of pervious concrete with recycled aggregate is smoother than that of natural aggregate pervious concrete by $PFC^{3D}$, which means that the bridging effect is weakened in the stress transfer between the left and right sides of the crack. Through the analysis of the development of the internal cracks, the recycled aggregate concrete generated more cracks than the natural aggregate concrete, which means that the recycled aggregate concrete is easier to form a coalescence fracture surface and eventually break.

• 환경영향평가
• /
• 제13권5호
• /
• pp.263-276
• /
• 2004

This research is primarily intended to propose a new concept for aggregate control of impervious coverage using remote sensing and GIS. An empirical study for a case study site was conducted to demonstrate how a standard remote sensing and GIS technology can be used to assist in implementing the aggregate control for impervious coverage as intermediary between decision makers and scientists. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in the aggregate control; the meaningful definition of land mosaic in terms of pervious areas, classification of pervious intensity, change detection for pervious areas. Detailed visual maps (e.g. estimation of impervious surface allowable) can be generated over large areas quickly and easily to increase the scientific and objective decision-making for the aggregate control. It is anticipated that this research output could be used as a valuable reference to confirm the potential of remote sensing and GIS in the aggregate control for impervious coverage.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.553-566
• /
• 2019

This study aimed to categorize pervious rubberized concrete into fresh and hardened concrete analyzing its durability, permeability and strength. During the globalization of modern life, growing population and industry rate have signified a sustainable approach to all aspects of modern life. In recent years, pervious concrete (porous concrete) has significantly substituted for pavements due to its mechanical and environmental properties. On the other hand, scrap rubber tire has been also contributed with several disposal challenges. Considering the huge amount of annually tire wastes tossing out, the conditions become worse. Pervious concrete (PC) gap has graded surface assisted with storm water management, recharging groundwater sources and alleviate water run-offs. The results have shown that the use of waste tires as aggregate built into pervious concrete has tremendously reduced the scrap tire wastes enhancing environmental compliance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.288-295
• /
• 2011

본 연구는 최적의 투수성과 보수성 및 압축강도를 갖는 보투수 포장체의 개발을 위한 것으로, 단입도의 골재 및 SAP를 사용함으로써 투수계수 및 보수성능의 개선은 물론 포장체의 온도저감효과가 있음을 확인하였다. 이를 위하여 단입도 골재의 입경 및 SAP 첨가량에 따른 압축 및 휨강도에 대한 시험을 실시하였으며, 보투수 포장체의 투수성능 및 보수량에 대한 시험을 실시하였다. 시험결과 단입도 골재의 입경이 작아질수록, SAP 첨가량이 증가할수록 압축/휨 강도는 증가하였으며, 투수계수는 SAP 첨가량이 증가함에 따라 감소하였다. 한편, 보투수 포장체의 흡수율 및 보수량은 골재의 입경이 작아질수록, SAP 첨가량이 증가할 수록 증가하였으며, 보투수 포장의 온도저감효과는 아스팔트포장에 비해 최대 $20^{\circ}C$ 까지 저감됨을 알 수 있었다.

• 한국환경복원기술학회지
• /
• 제11권6호
• /
• pp.26-37
• /
• 2008

The purpose of the study was to evaluate the effect of pervious pavements on reducing the surface runoff caused by rainfall. The surface runoff from twelve steel experimental beds with different pavement had been recorded every minute from May to September 2008, by the measuring system of tipping buckets(0.1mm/count) and data aquisition systems(National Instrument's Labview and DAQ boards & Autonics PR12-4). The dimension of the experimental bed was $1.5m(W){\times}2.0m(L){\times}0.6m(D)$ and eleven different kinds of vegetational(grass, grass+cubic stone, grass+hole brick), modular(brick, cubic stone, small cubic stone, wood block, interlocking block, clay brick, granular clay brick) and granular(naked soil, gravel) paving materials and concrete were applied for the comparison. Six rain events with depth over 30mm were selected and compared. The maximum depth of the rainfall selected was 137.5mm for 28 hours, and the minimum 30mm for 5 hours. The maximum rainfall per hour was 23mm/hr and the minimum 11.4mm/hr. The major findings were as follows; 1. All pervious pavement applied reduced over 75% of the surface runoff compared with concrete pavement. The grassy and porous pavements were relatively efficient in reducing surface runoff. 2. The grass was the more efficient as intercepting average 69.5mm of initial surface runoff, and maximum 77.8mm at the condition of 13.5mm/hr rainfall. The next was gravel intercepting maximum 65.5mm at the condition of 13.5mm/hr and the 40.9mm at 19.1mm/hr, average 55.7mm. 3. The modular pavements common in urban area were not good in intercepting the runoff except the 'clay granular brick' compared with others. The 'clay granular brick' showed relatively efficient intercepting average 14.1mm, which was the bigger amount than the 'grass+hole brick'. 4. The 'naked soil' were more effective than the 'concrete', 'brick', and 'interlocking block' in reducing the surface runoff, but less efficient than other materials. The capacity of the 'naked soil' to intercept the initial rainfall was similar to the 'brick'. As summary, the more grassy and porous pavement shows more effective in reducing surface runoffs.

• Advances in concrete construction
• /
• 제11권4호
• /
• pp.285-298
• /
• 2021

This study focused on experimental evaluation of mechanical properties of pervious concrete mixtures with the aim of achieving higher values of strength while considering the associated costs. The effectiveness of key parameters, including cement content, water to cement ratio (W/C), aggregate to cement ratio (A/C), and sand replacement was statistically analyzed using paired-samples t-test, Taguchi method and one-way ANOVA. Taguchi analysis determined that in general, the role of W/C was more significant in increasing strength, both compressive and flexural, than cement content and A/C. It was found that increase in replacing percent of coarse aggregate with sand could undermine specimens to percolate water, though one-way ANOVA analysis determined statistically significant increases in values of strength of mixtures. Cost analysis revealed that higher strengths did not necessarily correspond to higher costs; in addition, increasing the cement content was not an appropriate scenario to optimize both strength and cost. In order to obtain the optimal values, response surface method (RSM) was carried out. RSM optimization helped to find out that W/C of 0.40, A/C of 4.0, cement content of about 330 kg/m3 and replacing about 12% of coarse aggregate with sand could result in the best values for strength and cost while maintaining adequate permeability.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.160-167
• /
• 2017

본 연구에서는 알칼리 활성화 결합재 및 순환골재를 동시에 활용한 100% 순환자원 보투수성 알칼리 결합재 블록의 개발 가능성을 확인하고자 한다. 또한, 공극률, 압축강도, 투수계수, 보수량, 흡수율 및 증발성 등의 특성 시험 방법을 정립하여 표준화의 기초단계를 확보하였다. 그 결과, 순환골재를 이용한 알칼리 활성화 결합재 블록은 액상 규산나트륨 및 초기고온양생을 통해 24MPa급의 보투수성 블록을 제조할 수 있었다. 또한 순환골재를 적용한 경우 천연골재보다 보투수 블록의 보수량, 흡수율 및 상대흡수율에서 효과적인 결과가 나타났다. 종합적으로, 알칼리 활성화 결합재를 기반으로 순환골재 및 액상폴리머를 사용할 경우 보수량, 흡수율 및 상대흡수율 증진이 가능하고 일반 콘크리트 인터로킹 블록과 비교해 약 10% 수준의 표면온도 저감효과를 가진 보투수성 블록의 제조를 기대할 수 있다.

• 한국지반공학회논문집
• /
• 제32권5호
• /
• pp.37-48
• /
• 2016

본 연구는 실제 시공 환경에서 투수성 보도블록의 표면 유출 및 배수 특성을 알아보고자 하였으며, 표층 및 노반을 포함한 시편을 대상으로 불포화 상태에서 도심 내 우수 조건을 고려한 배수 실험을 진행하였다. 일정한 시간 간격을 두고 반복적인 배수 실험 및 공극 막힘 실험이 시행되었으며, 정량적 분석을 위하여 3D X-ray CT 이미지 분석 및 증발 실험을 시행하였다. 실험 결과, 시간 간격 동안 발생한 증발로 인해 공극 내 물이 공간적으로 재분포되어 표면 유출을 야기시키는 것으로 나타났다. 특히, 공기에 노출되어 있는 표층보다 시편 하부에 위치한 노반의 공극 변화가 투수성 보도블록의 배수, 증발 등 전체적인 수리학적 거동을 크게 저하시켰다. 또한 공극 내 침전물은 증발로 인한 변화를 증진 시키며, 이 때 저하된 배수 성능은 쉽게 회복되지 않는 것으로 나타났다. 그리고 선행우수조건에 의하여 배수 성능이 저감되면서 최대 표면 유출 높이가 증가하는 것으로 나타났다.

• 한국수자원학회논문집
• /
• 제48권5호
• /
• pp.321-330
• /
• 2015

최근 수질 및 수문에 있어 도시화에 미치는 영향을 도시 지역 내 저영향개발 기법을 이용한 저감효율에 관하여 연구가 진행되고 있다. 하지만 저영향개발 기법의 정량적 효율성을 증명할 수 있는 방법이나 기준 설정과 관련한 논문은 전무한 실정이다. 이에 본 연구에서는 수문순환 체계를 재현 및 정량화할 수 있는 강우-유출 시뮬레이터를 개발하였고 실제 투수성 블록에 적용하였다. 이는 일반 블록과의 지표유출 및 중간유출 등 수문순환의 요소에 대하여 정량적으로 산정 및 비교함으로써 기기를 통한 투수성 블록의 효율성 분석을 실시하였다. 본 연구의 결과로 투수성 블록의 경우 강우강도가 크고 지속시간이 길어질수록 지표유출량의 저감효과를 뚜렷이 확인할 수 있었으며, 50 mm/hr의 강우강도로 1시간동안 분사하여도 지표 유출이 전혀 발생하지 않도록 제어할 수 있었다. 그리고 본 연구에서 사용한 기기의 강우검증 과정을 통해 결과의 신뢰성을 높이고 투수성 블록뿐만 아니라 여러 LID 요소 효율성 검증에도 활용할 수 있을 것으로 생각된다. 따라서 본 기기를 활용하여 저영향개발 요소기술별 유출의 저감효과분석을 위한 효율성 검증의 표준화를 정립하는 기초 연구로 활용할 수 있다.