• Korean Journal of English Language and Linguistics
• /
• v.1 no.2
• /
• pp.227-242
• /
• 2001

It is noted that although the current state of development of web-based English education (hereafter referred to as WBEE) might not meet the criteria some educators have set for themselves in the field, students certainly seem to prefer studying in a web-based and computer-assisted learning environment. This kind of demand is fueling the drive to develop more suitable variations of WBEE. In order for WBEE to work out, a teacher should be a multifunctional type of instructor handling responsibilities such as the role of scriptwriter to create text, act as technician for the sound mixing and recording, preside over online chat rooms and discussion boards, and finally, as webmaster to maintain the site and supervise all academic/ clerical work related to the course. Therefore, it is suggested that WBEE be accompanied by a small personnel to divide the labor and lessen the burden on the actual teacher. Finally, it is noted that the traditional relationship between students and teacher may no longer be sustainable since WBEE does not provide the face-to-face style of class discussion and office hours in its current form. Until the technology is fully developed to compensate for these kinds of differences, it is an immediate challenge to provide other more compelling reasons for students to participate in WBEE.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.15 no.1
• /
• pp.72-80
• /
• 2009

Purpose: This study was designed to identify the prediction factors that influence nurses' organizational commitment. Method: The sample of this study consisted of 526 full-time nurses randomly picked at 19 general hospitals in Korea. The data was analyzed by computer using SPSS 15.0 for Pearson's correlation coefficient, and multiple regression analysis. Result: 1) According to general characteristics, nurses' organizational commitment levels among the sample were significantly different in age, religion, social status, marital status, clinical career, and department satisfaction. 2) Level of nurses' organizational commitment was average 2.70, job satisfaction 2.91, burnout 3.03, empowerment 3.36, autonomy 2.93, and self-efficacy 3.51. 3) Nurses' organizational commitment had significant positive correlations with job satisfaction, empowerment, self-regulation, social support, self-efficacy, clinical career, and personnel movement experience. On the other hand, it had significant negative correlations with occupational stress, burnout, and age. 4) The prediction factors which influence Nurses' organizational commitment were job satisfaction($\beta$=.405), burnout($\beta$=-.282), self-regulation($\beta$=.171), clinical career($\beta$=.135). These factors were approximately 49.6% reliable in explaining nurses' organizational commitment. Conclusion: These results can be used to develop hospitals' management strategies for increasing organizational commitment effectiveness and nursing productivity.

• Korean Medical Education Review
• /
• v.11 no.1
• /
• pp.21-33
• /
• 2009

The purpose of this study is to review a variety of e-learning use in medical education, and to analyze the e-learning related research in medical education, finally to discuss possibilities and limitations of e-learning in future. Subjects of this research are 46 papers published in Korean Medical Database, PubMed, MEDLIS, RISS4U. Content analysis of 46 papers have been conducted based on the period of research, research methods, research subjects, study personnel, effectiveness. The results are as follows. First, various e-learning, such as hyper-media, simulation-based medical education (SBME), game-based learning, web-based learning, computer-based test (CBT) are implemented in medical education. Second, 35 research (76.1%) has verified the positive effect of e-learning. Third, in the case of Korean studies, experimental studies (46.2%) in a short period (46.2%) of 50-100 people (42.3%) to take the most. As a result, it is reported a lack of theoretical discussion and insight on e-learning compared to foreign research. Educational paradigms are currently shifting from off-line to on-line, from traditional classroom lecture to e-learning. But e-learning is not a substitution to traditional teaching, but a matter of choice. The choice is up to medical professors and students.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.2
• /
• pp.141-148
• /
• 2017

The waterworks company is in charge of managing water facilities buried underground, and the management has been centered on manholes. However, since there is no standard management manual, it has been impossible to introduce and operate a systemized managing tool by water service providers and managers, and manhole management has been carried out by individual data recording personnel for each water service provider. When the management is carried out individually, the data to be shared by other waterworks managers tend to be privatized, and consequently, it may become a big obstacle to proceed with many civil works such as emergency leak repair, road excavation, replacement of old buildings. This report introduces RFID (Radio Frequency Identification) system which is based on the magnetic field capable of IOT. It also describes the necessity of leveraging the system for smart managing of pipe management record that has been done by hand writing. The RFID system includes RFID marker, data reader, portable computer operating program, and data base server operating program. In this system, the data is managed with a single communication device, and it would be possible to share the information on the underground facilities and water treatment facilities. This RFID technology is expected to provide water service providers with opportunities to develop more scientific and modernized underground facilities information systems.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.144-146
• /
• 2005

Dual electromagnetic sensor is used for sensing the weld line. The sensor consists of excitation and two sensing coil wound over the ferro-magnetic core. By using the dual sensor, the effect of noise is minimized. It is based on the generation of eddy currents in the welding plate by passing current through the excitation coil. The sensor can be used to track the butt joints having no gap between them, where a vision based sensor fails to track. Sensor sensitivity depends on the number of coil turns, frequency of excitation, distance of a sensor from the work piece, diameter of core, etc. The whole system consists of a sensor, a signal processing board, a motion controller and a personnel computer (PC). The raw sensor signal is processed using the signal processing board. It consists of amplification, rectification, filtering, averaging, offset adjustment, etc. Based on sensor data, the motion controller adjusts the position of a welding torch.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.912-918
• /
• 1994

Poor speech intelligibility in an air traffic control room is frequently a result of many, quite different causes and occasionally leads to complaints of the controller personnel. The paper describes a sequence of successful tasks performed in a local control room. The initial measurements included an investigation of the background noise (caused by fans, air condition, computer and radar equipment) and performance checks of the electronic audio and communication equipment with respect to the audio transmission behavior. The spectral composition of the noise as well as the characteristics of the audio communication path between the controllers and the pilots(which showed a loss of spectral information in the audio band due to built-in notch filters for the suppression of control tones) required adaptations of the amplitude behavior of the amplifiers through user adjustable tone controls. The radar console fans, which contributed significantly to the overall noise floor of the room, underwent a substantial reconstruction by replacing the tight mounting with an elastic double suspension, reducing the noise level by 50%. Finally, a possible source of untimely fatigue of the controllers during their working hours has been found in strong spectral components of the noise above the audio band, radiated by numerous video monitors in the control through vibrating components excited by the line frequency of the video signal.

• Asia pacific journal of information systems
• /
• v.8 no.2
• /
• pp.105-119
• /
• 1998

As the first step to information security, the security policy and organizational control need to be established. The purpose of this study is to investigate the policy and management of information security of five major Korean business groups. The results of case study on five giant groups can be summarized as follows. There exists a basic policy for information security. But it is outdated and not realistic in the present. The security audit and education need to be upgraded. It is also necessary to use security tools actively. The security level is low in companies which do not have independent information security divisions. Therefore, it is desirable to build information security teams. The number of security personnel is not enough for the task although there exist an information security team in the company. It is important to check if the team has the ability of perform information security task. The interview with security managers reveals that the total security management should be integrated with physical and computer security. It is suggested that an Information Security Center play the major role for information security. The study on the information security management for industry level is expected to be performed in the future.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2014

In this study, the unmanned vehicle to develop a preliminary step, we were facilities for Automated Guided Vehicle (AGV) simulator is designed and implemented. Industry is increasingly the more advanced automation and management systems need to be efficient. These studies are at least 24-hour continuous unmanned vehicles and personnel can result in reduction of labor costs. In addition, safety accidents can be minimized in the industry as an effect of intelligent AGV is essential. This study is the initial step for the development of AGV. manufactured simulator to Simulation and drives the performance of the system is evaluated. The configuration of the simulator, ultrasonic sensors, infrared sensors, and using the obstacle were to follow a given path. In addition, two-way communication between the host computer and the main processor that was. communication method that IEE802.11 meets the standard is applied to high-speed wireless LAN systems, each of the sensor information is calculated. AGV having a drive shaft 4 of the four wheels are respectively independent structure. AGV's main processor is driven using a high-performance DSP, and the controller controls the steering device of the load could be significantly reduced.

• Journal of Digital Convergence
• /
• v.13 no.1
• /
• pp.305-311
• /
• 2015

Nowadays, because IT market expansion and complexity has been progressing and competition has intensified, there is a growth of information system building industries having difficulty through traditional business management methods. A survey was conducted among site personnel (Project Manager PM and Project Participants) to generate an institutional framework to efficiently manage this and project management process support. Through this, the importance of element technology and fragility of software development project management must be understood and an improvement of the element technology must be generated. By using this, a very relevant result that presented a logical basis was obtained in the decision making of the importance of project management and the role of overall project manager and core project management fields.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.747-752
• /
• 2020

Special logistics, such as steel coils or steel plates, are being shipped and deployed depending on experienced personnel. Therefore, there is a great possibility of accidents due to immaturity by human error or lack of experience. There is a need to prevent the possibility of such an accident in advance, to apply security requirements required for special logistics, to ensure the stability of cargo, and to operate an management system to check the correct loading list. In addition, accurate shipping inspection is necessary to balance the ship. This paper analyzes the problems of shipping inspection currently being implemented and proposes a web-based port special logistics shipping inspection and balancing operation system to improve it.